Question about Maytag Microwave Ovens
E-13 - T1 Max time error (oven did not preheat properly). PCB assembly may need reset or may be bad.
The first thing I would suggest is a hard reset. Unplug the unit for a minute or so. Then plug it back in, set the clock and try again.
If that doesn't work,leave it unplugged for maybe an hour. Then let us know if the hard reset does not fix it.
Otherwise, Since it's less than one year old, it should be fully covered under warranty.I'd suggest contacting the manufacturer to get it fixed free.
You can find your nearest Maytag-authorized servicer here.
We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.
Posted on Dec 17, 2008
The door handle can easily be replaced without the assistance of a repairman. This is a common problem with some microwave oven doors.
This is not difficult. To access the door handle mounting screws on MOST microwave ovens, you have to remove the inner door panel that goes around the perimeter of the glass. You can use a small screwdriver to carefully pry the plastic up and work your way slowly around the perimiter of the glass. Most microwave ovens also have grooves in the panel that you can insert the screwdriver into. Use care not to pry against the glass. The glass is tempered and also has an RF shield that prevents harmful microwaves from potentially harming the consumer. If you break the glass, you will need to purchase a new door.
The door handle screws are located behind the inner panel. Simply remove the broken handle and install the new one. Re-insert the inner door panel carefully and gradually work your way around the perimeter of the door glass and make sure it snaps back into place.
Replacement parts can be found at any of the following sites:
I hope this helps you.
Posted on Aug 12, 2009
Tips for a great answer:
Jan 27, 2016 | Samsung SMH8165B Microwave Oven
on Mar 27, 2010 | KitchenAid KHMS155LSS 1000 Watts Microwave...
Control displaying F1 E5:
There may be a problem with the Oven Control, or the associated wiring.
Power unit down by turning off the circuit breaker(s) for one (1) minute.
Power unit up by turning on the circuit breaker(s).
Monitor the oven for one (1) minute to ensure the error code does not display again.
Verify oven operation.
Oct 23, 2015 | KitchenAid KEMS309BSS Combination...
Apr 07, 2012 | Maytag MMV5100A Microwave Oven
Aug 25, 2010 | Microwave Ovens
Dec 04, 2009 | Kenmore 62622 Microwave Oven
Dec 16, 2008 | Maytag MMV5165 Microwave Oven
Nov 15, 2008 | Maytag MMV1153A Microwave Oven
Some models are equipped with a sensor that can automatically adjust the oven's heating time based on the amount of steam in the oven. If your microwave is displaying E1, E4, or E5, there may be an issue with the gas sensor. For an E1 error, press the Cancel button and check on the food.
If the message is either ERROR or E-6, it indicates a mechanical fault.
For all error indications, try unplugging the microwave from the outlet for at least ten minutes and then plug it back in. If the error persists, the microwave may require service. Please use our ASC Locater to find your nearest Authorzied Service Center
Oct 21, 2007 | Samsung SMH7174BC Microwave Oven
230 people viewed this question
Usually answered in minutes!