Question about Computers & Internet
Need help setting up a wireless router
I suggest you to use the Setup CD that came with it. That will guide you on how to install the router.
Posted on Oct 21, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: wireless setting in LINKSYS
Use the desktop for this (the hard wired one) or hard wire the laptop to the router and follow the following steps: 1. Open the web browser 2. In the Address bar type 192.168.1.1 3. When prompted for username and password, type password - 'admin' (default password) and skip the username 4. Once you are able to see the Setup page, click on the wireles tab 5. Change the SSID to 'gunja' (for instance). Please make sure there are no spaces in the SSID and make it as short as possible (for better peformance) 6. You may also change the channel to 11 (recommended) 7. Save the settings by clicking on 'Save Settings' 8. Once you are back on the same page, click on Wireless Security tab (sub-tab under the wireless tab) 9. Change the security mode to WEP 10. You may type anything in the passphrase box and click on generate. That will generate 4 keys for you 11. You may also type a customized key in the Key 1 box (hexadecimal - between 0 to 9 and A to F) 12. Please note that the only key we need in case of WEP is the key 1 (this is the only key that will be transmitted by default) 13. Save the settings 14. Now when you would view the available networks on the laptop, you must be able to see the new SSID. Try connecting to it with the WEP key 1 15. And bang it goes - up and running Good Luck
Posted on Mar 27, 2007
It didn't work for me.
Should the username be the email address from At&t that controls the DSL line, or should it be the username to get into the Netopia modem?
Posted on Jul 07, 2008
SOURCE: Linksys Wireless G Router Set up
I ended up loading the router setup cd onto another laptop, and it worked fine. I still don't know why the first laptop had the error code, but they now both, work perfectly fine. Thanks, anyway.
Posted on Sep 06, 2008
Try to reset the router. This should resolve your problem. That model has a small hole were you must press with some a paper clip for exemple for a few seconds. This will reset the router to its original state.
Posted on Nov 07, 2008
Tips for a great answer:
Apr 02, 2014 | Linksys Computers & Internet
Mar 27, 2014 | Linksys WCG200 Router
Feb 12, 2013 | Linksys WRT3000N Wireless-N Broadband...
Jan 27, 2012 | Linksys Wireless-G WRT54G Router
Mar 25, 2010 | Linksys Wireless-G WRT54GS Router...
Jan 06, 2010 | Linksys Wireless-G WRT54G Router
Nov 09, 2009 | Linksys Wireless-G Broadband Router
Jan 29, 2009 | Linksys Wireless-G Broadband Router
Nov 24, 2008 | Linksys Wireless-G Broadband Router
380 people viewed this question
Usually answered in minutes!