Question about Vacuums

Open Question

I need a parts diagram for a kirby classic 1-cr

I am trying to rebuild a kirby classic 1-cr and i need a parts diagram and part numbers

Posted by on

1 Suggested Answer

Agent Don
  • 310 Answers

SOURCE: please i really need help

http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=602889
Generic problem for all Vacuums
Please i really need help
Posted by jillenealice on May 17, 2008
I was sold a Kirby classic 1-cr with some never seen or heard of accessories and attachments and no manual or directions on their uses is there a place to get an old manual for free. Or not so free

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. You can try your local Kirby vacuum dealer or to contact the Kirby factory that I will list for you below. The vacuum is over 25 years old and if someone would have an old owner manual for the item they would have to make a copy of the old Kirby 1-CR vacuum, or stop in to a vacuum shop and they would be able to assist you in what the items are for the accessories or attachments. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://kirby.com/Contact Us by Phone
United States and Canada: 1-800-494-8586
Between the hours of 8 a.m. – 5 p.m. (EST)
Monday - Friday
United Kingdom: 0800-328-1247
Europe: 00-800-5472-9272
South Africa: 0800-203-222

Contact Us by Email
Complete the online Form to Submit Your Comments or Questions
Contact Us by Fax United States and Canada: 216-529-6146
Contact Us by Mail
Consumer Relations Department
The Kirby Company
1920 West 114th Street
Cleveland, OH 44102

http://www.a-1vacuum.com/ 1-800-657-1874 Customer Service
Thanks, Don the Vac Man
Go Ahead. Use Us.

Posted on Jun 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

G5 motor is on it's way out


If you are the original owner,you can send it to Kirby rebuild and have them rebuild it.For a non-original,it is around $300.They go thru it,replace the parts needing replaced,buff the metal covers to remove the blemishes,and send it back to you.It will look and operate as it did when you first purchased it.Call Kirby Rebuild in Cleveland,Ohio.

Oct 26, 2008 | Kirby G5 Bagged Upright Vacuum

1 Answer

REPLACING BELT KIRBY CLASSIC III


http://geeksquad.fixya.com/ThreadView.aspx?prdid=11562&thid=806061
REPLACING BELT KIRBY CLASSIC III
Posted by JETALBOT on July 19, 2008
I CAN'T REPLACE THE BELT ON THE CLASSIC III (KIRBY). CAN YOU HELP ME? ELAINE
Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The belt install on a Kirby is to raise the height adjustment to the highest level and then dial the belt off counter clockwise so it is loose and not on the fan pulley, release the top lever on the bell housing, then remove the bottom plate and unhook the brushroll on one side, slide the old belt off and then slide the new one on, replace the brushroll with the screws facing the carpet and re-hook the bottom plate on the Kirby. Then take the bell housing and hook that back on to the Kirby and lock it down. Then dial the belt on clockwise all the way and the belt should be on the fan pulley. The belt should be ready to go, plug in your Kirby and then do the step down on the vacuum height adjustment until the tone changes, then try to see id it picks up, if not go one more height adjustment and that should be the correct setting.

http://kirby.com/
Customer Service – U. S. & Canada
1-800-494-8586
Hours 8:00 am to 5:00 pm (EST)
Mail To: Consumer Relations
The Kirby Company
1920 West 114 Street
Cleveland, OH 44102
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jul 19, 2008 | Kirby Heritage II Vacuum

4 Answers

Belt


I don't know where near you, but most local repair shops should have the belts for kirby.

Jun 18, 2008 | Kirby Generation 3 Bagged Upright Vacuum

1 Answer

Please i really need help


http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=602889
Generic problem for all Vacuums
Please i really need help
Posted by jillenealice on May 17, 2008
I was sold a Kirby classic 1-cr with some never seen or heard of accessories and attachments and no manual or directions on their uses is there a place to get an old manual for free. Or not so free

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. You can try your local Kirby vacuum dealer or to contact the Kirby factory that I will list for you below. The vacuum is over 25 years old and if someone would have an old owner manual for the item they would have to make a copy of the old Kirby 1-CR vacuum, or stop in to a vacuum shop and they would be able to assist you in what the items are for the accessories or attachments. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://kirby.com/Contact Us by Phone
United States and Canada: 1-800-494-8586
Between the hours of 8 a.m. – 5 p.m. (EST)
Monday - Friday
United Kingdom: 0800-328-1247
Europe: 00-800-5472-9272
South Africa: 0800-203-222

Contact Us by Email
Complete the online Form to Submit Your Comments or Questions
Contact Us by Fax United States and Canada: 216-529-6146
Contact Us by Mail
Consumer Relations Department
The Kirby Company
1920 West 114th Street
Cleveland, OH 44102

http://www.a-1vacuum.com/ 1-800-657-1874 Customer Service
Thanks, Don the Vac Man
Go Ahead. Use Us.

May 17, 2008 | Vacuums

1 Answer

KIRBY HERITAGE II


Here are some Kirby phone numbers, they should be able to tell who does Kirby in your area. You could try calling a local repair shop to see if they can help.

US----------------(1)-800-437-7170
Europe------------(1)-800-547-9272
Africa------------(1)-800-203-222

May 13, 2008 | Kirby Heritage II Vacuum

1 Answer

Front switch broken on Kirby Classic III where I can buy it in Toronto, Canada area


Generic problem for all Vacuums
Front switch broken on Kirby
Front switch broken on Kirby Classic III
where I can buy it in Toronto, Canada area


I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.
You can contact a local dealer that can be found in the yellow pages under vacuum or you can call the Kirby factory to see if they have a local dealer or can send out the part to you from the factory. I will give some examples listed below:
http://kirby.com Contact Us by Phone
United States and Canada 1-800-494-8586
Between the hours of 8:00 am to 5:00 pm EST
Monday thru Friday

www.AVACcorp.com 1-800-328-9430 they can ship out the part if you need it and if you cannot find it anywhere else.



Apr 18, 2008 | Vacuums

3 Answers

Vibrating and noisy Kirby


Power off the vacuum.

Unplug the power cord from the wall.

Remove the head or hose attachment.

Look at the fan and make sure all the fins on the fan are there.

If part of one or more is missing it will cause the fan to wobble and shake.

Oct 18, 2007 | Kirby G4 Bagged Upright Vacuum

Not finding what you are looking for?
Vacuums Logo

Related Topics:

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...