Question about Sony Grand WEGA KF50WE610 50" Rear Projection HDTV-Ready Television
I have Sony Grand Wega KF-60W610. When I turn it on, the standby light blinks and tv makes a buzzing sound (I beleive from Speakers??). After 30sec or so lamp light starts blinking.
It sounds like a bad lamp. Replae the lamp firts, but there is a chance you have a bad lamp driver also.
Posted on Oct 21, 2008
Tips for a great answer:
Apr 29, 2014 | Sony Grand WEGA KF60XBR800 60" Rear...
If your Sony Wega will not turn on, the front green light blinks, you hear a faint whirring sound and the green light turns red and flashes, it probably means the lamp inside the set is no longer working. If you noticed the screen beginning to dim in the preceding days or weeks, this most likely is the cause.
If the green light flashes and the picture comes on momentarily but then goes off, and the green button flashes until the set restarts, then the seal around the lamp mount is loose and needs to be refitted.
If the picture on your Grand Wega cuts in and out and the green standby light flashes, both of the set's STKs need to be replaced. STKs are small chips on your television's circuit boards and are identifiable by their labels. The specific STKs used in your Grand Wega TV will be identifiable by the numbered labels on top of the STKs.
When you plug in your Sony Wega and hear a loud popping sound, it's probably caused by a defect in the high-voltage circuit. Let the professionals take care of this one.
If, after turning on your Sony Wega, you can hear your set but the screen is black, you most likely need to replace your projection lamp.
Feb 23, 2011 | Sony Grand WEGA KF-42SX300 42" LCD TV
Jul 30, 2010 | Sony Grand WEGA KF50WE610 50" Rear...
Jun 05, 2009 | Sony Grand WEGA KF50WE610 50" Rear...
Aug 11, 2008 | Projection Televisions
450 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: