Question about RCA DIRECTV Satellite Remote Control

1 Answer

Hughes box wont power on.

Lost power for about 10 minutes in the house. Once power was restored, downstairs TV and dvd equipment power on work fine, but the Direct TV Hughes box, that is connected to these downstairs wont power on. The green on light keeps flickering, but niether the remote or manual pushing of the power button works.

I have the same setup upstairs and it continues to work just fine.
Tom D

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 814 Answers

Sorry it took so long to reply to your request for help.This Direct TV box has had a component failure. You will need to call Direct TV and have them replace the box. You can call Direct TV Customer Support at this telephone number 1-888-667-7463. Tell them that you are having a problem with Direct TV box and need a replacement. I hope this information help you solve your problem with the Direct TV box failure. Thank you for using FixYa and have a nice day!

Posted on Jun 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It's not working what can I do to program one for all controller to rca tv


HI,
The One For All 3 Device Universal Remote Control is preprogrammed at the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola cable box. To control devices other than the default brands, perform the following steps; otherwise skip this section:

HOW TO PROGRAM

1.Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc)

NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step.

( CHECK THE BELLOW ADDED LINK TO FIND THE CODE )


2.On the remote control, press a device key once (i.e., DVD/VCR, CBL/SAT, or TV).

NOTE: To program control of a VCR, PVR (or DVR), TV/VCR Combo, or TV/VCR/DVD Player Combo press DVD/VCRonce. After programming a VCR Combo device, you will be able to control channel selection, volume, and VCR functions.
NOTE: To program control of a DVD Player, DVD Player/VCR Combo, or TV/DVD Player Combo, press DVD/VCRonce. After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SATonce.

3. Press and hold SET until the LED (red light) blinks twice, then release SET

4. Use the Manufacturer's Codes (starting on page 18) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly, the LED will blink twice.

NOTE: If the LEDdid not blink twice, repeat steps 2 through 4 and enter the same code again.

5.Aim the remote control at the device and press POWER once. The device should turn off.
If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works. If it still doesn't work, try Searching For next code.

NOTE: If the device does not have a POWER key, press PLAY

6. Repeat steps 1 through 5 for each device you want to control. For future reference, write down each working device code following.

Electronics Equipment Repair Center ONE FOR ALL URC3021 UNIVERSAL REMOTE...
Electronics Equipment Repair Center ONE FOR ALL URC3021 UNIVERSAL REMOTE...

Jan 25, 2015 | RCA Televison & Video

1 Answer

I cannot use the DVD play function with the control box I have. The control box which came with the TV is lost can I get a replacement


We would be happy to help you with getting your DISH remote working with DVD player. In order for us to give you a specific code for your DVD player we would need to know the brand. We recommend performing a power scan; this scans the remote for a code that will work with your DVD player. Power scan instructions:

Step 1:
Press and hold the VCR/DVD mode button until all mode button back lights illuminate,then release.

Step 2:
Press and release the Power button.

Step 3:
Press the Up button once a second while pointing the remote at the desiredequipment. If the code for the equipment comes up, the equipment will poweroff.

Step 4:
Press the pound (#) button. If the code entered is valid for the remote, themode light flashes three times.
After doing the power scan please remember to put the remote back into SATmode. Thanks so much for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Feb 21, 2011 | DISH Network IR Remote Control

1 Answer

Remote control not recognizing codes


Codes for many of our TVs can be found at InsigniaProducts.com. For the Blu-ray player, we recommend using your universal remote's scan or learning feature.

Apr 28, 2010 | Hughes HRMC9 Remote Control

1 Answer

Batteries went dead on my 3.0 remote, changed batteries and now the remote does not work at all for tv or satellite


Hello absolutel888, my name is Michael Hurst with DISH Network. Sounds like the remote lost authorization with the receiver and needs to be reprogrammed to the receiver. In order to program the remote to the receiver you would have to have the System Information screen on your TV. To get to the System Information screen would have to access the receiver menu. Since the remote isn't programmed at this time. Try to take the Smartcard out of the receiver and leave it out then the System Information screen will be on your TV. Look at the Remote Address box and take note of the number. Hold the Sat button on your DISH remote until all the lights on top of the remote light up. Let go of the Sat button. Then press a number between 1-15. Once number is typed in press # and then record. If there isn't a Smartcard try the menu button on the front of your receiver and follow the same steps. For your tv you can use a power scan to program the remote to it here are the steps: With the desired equipment on, press and hold the correct Mode button until all mode button backlights illuminate, then release. Press and release the Power button. AUX Mode: Before pressing and releasing the Power button. Press 0 for a TV, Press 1 for a VCR/DVD and Press 2 for any other device. Then Press STAR (*). Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will power off. Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.

Jan 18, 2010 | DISH Network IR Remote Control

1 Answer

Remote lost program function


Hello, this is Vincent from Total Control Remotes - www.totalcontrolremotes.com. We program a lot of Marantz remotes as well as others and the problem could be a result of many different factors. It could be the programming or a physical reason. My suggestion is to send us the configuration file, we will take a look and confirm that the remote programming is not a problem. We can walk you through a variety of troubleshooting steps with the equipment once we have determined that. There is no real answer however until we do our homework.

Regards,
Vincent
Total Control Remotes
www.totalcontrolremiotes.com

Sep 15, 2009 | Marantz RC3001 Remote Control

1 Answer

Lost the Hughes manual. I need the code settings for the remote


Here are two links for the manual you are in need of:

http://www.directv.com/learn/pdf/System_Manuals/Hughes/HNS_SD_HBH.pdf

http://www.solidsignal.com/manuals/HRMC-11_HRMC-12_Owners_Manual.pdf
Either of theses should get you to the correct manual and should have the code you need.

Feb 27, 2009 | Hughes HRMC11 Remote Control

1 Answer

I have a hughes hrmc-11 remote control and i have a proscan flat screen tv i was wondering if there is a code so i can use the hughes remote to ctrol my tv


auto code search.

hold down the tv button and mute button until the tv button light stays on. press the channel up button(this will cycle thru codes) test with the power button. process may take a few minutes. when the tv turns of press the tv button to store code

Jan 02, 2009 | Hughes HRMC11 Remote Control

2 Answers

Hughes Remote works the satellite but not the TV


You have to push and hold down TV and Mute button (for 2 seconds at the same time), then release them at the same time, then push channel up until the TV turns off.  Be patient and continue channel up until the TV turns off.  When it turns off, then push TV again to lock the code.

You were doing fine, but missed to push channel up to fine the code.

Oct 25, 2007 | Hughes HRMC11 Remote Control

4 Answers

Lost tv code


Here are some of the codes2.gif still looking for manual
GE VCR: 2000, 2013, 2021, 2022, 2053, 2087, 2089, 2091, 2115, 2120
Mitsubishi TV4.gif 0093, 0150, 0178, 0019
JVC2.gif VCR 0067, 0041, 0008
JVC DVD1.gif 0558, 0623
samsung1.gif codes is 1004,1005,1006,1012,1013,1015,1017,1019
Motorola2.gif Cable2.gif Box: 5000, 5003, 5046, 5047, 5052
Comment by Gigatech, posted on Dec 10, 2007 Here is some helpful information4.gif I found:
Without the code on JER-323:
1.Manually turn on the component you want the remote to control.
2. Press the device4.gif button, example:( TV) and the (power button) for 3 seconds until the (on/off button stays lit).
3. Once the (on/off) button is lit, press the (on/off) button until the unit (the TV or unit you are trying to control.) turns off.
4. When the code is located, press the (stop) button at the bottom to save the code.

Jan 03, 2007 | Jensen 143307 Remote Control

Not finding what you are looking for?
RCA DIRECTV Satellite Remote Control Logo

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69718 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...