Question about Drills

1 Answer

Dewalt 18volt drill xrp dc988 in pieces

Need to completely reinstall gears basck into casing and then back into drill body can i get diagams also type of lube to use

Posted by on

  • Anonymous Mar 29, 2014

    milwaukee 18volt drill smokes on start up do i need new brushes

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 99 Answers

If you are in the U.K. go here fore tech help and service dealer locator etc https://service.toolcommerce.com/products/HomePage.aspx?BrandId=2&language=en-GB&country=GB
If you are elsewhere go to www.dewalt.com and you can navigate to other countries etc from there.

Posted on Oct 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dewalt instruction manual


The black thing at the end is the "keyless chuck". Grasp it just behind the silvery tip of the chuck with one hand, and grasp the knurled ring just behind THAT area with the other hand. Twist the "front" hand counterclockwise while you twise the "rear" hand clockwise. That will loosen the chuck so you can change bits.

Aug 06, 2014 | Dewalt Dc987k2 Xrp 18volt 12 Drilldriver...

1 Answer

Dewalt 18vxrp stopped working. Any suggestions???


Knock the back end against something. Or shake the drill and if it sputters, it could be a loose wire, or more likely worn brushes. If that doesn't do anything, open the case and check with a volt meter if you are getting any current past the switch (ie hold the terminals from the volt meter onto the brushes or onto the leads coming out of the top of the switch.)

If you get a reading of 19V to a couple volts less, then you're switch is most likely okay. Check for worn brushes. Or a motor replacement might be necessary. (Yes it's easy to do)

Apr 21, 2012 | Dewalt Dc987k2 Xrp 18volt 12 Drilldriver...

1 Answer

Switch sometimes does not work


The switch on these drills is notorious for doing exactly what you describe. One thing to check is the battery terminals on the bottom of the switch, they get bent or broken off easily. It could also be internal to the switch but the only fix is to replace it. You need Dewalt part number 152274-22 to repair the drill. It's a fairly easy repair but shop the internet, they cost from $55 to $75 plus shipping.

Feb 03, 2012 | Dewalt DC988ka 18 - volt XRP 1/2''...

1 Answer

I have an 18volt Dewalt XRP 1/2 inch drill. The drill has been working perfectly up until this morning when I took it froms its case. I was using it the evening before to screw in some 2 inch screws into...


Check electrical contacts in drill body where battery connects. Check wiring inside the drill, trigger and check also brushes. You do not have to invest 329, you can buy "body only" machine for few bucks and reuse your charger and battery packs. Juraj

Oct 20, 2010 | Dewalt DC920KA Heavy Duty Xrp 18V Cordless...

1 Answer

I had ewalt 18 V XRP apart to clean motoe and droped the gears out can I get a diagram of how they go back in?


go to dewaltservicenet.comand type in your model number and they have an exlosion for this toool.

Oct 04, 2010 | Dewalt DC988ka 18 - volt XRP 1/2''...

1 Answer

Need workshop manual for dc988


Hello,
Here is a download for the manual you want.

http://toolnet.dewalt.com/Toolnet/OMrepos/00A5C2051109D14300800003A4D6051F.pdf

You could download to a cd or print it out. Whatever is best for your workshop.

Hope this helps.

Jan 05, 2010 | Dewalt DC920KA Heavy Duty Xrp 18V Cordless...

1 Answer

Diagram for rebuilding DeWalt DC988


Yes.

Go to dewaltservicenet.com and look up your model. (Hint: Press the "Go" button on the screen not the Enter button on your keyboard to submit your model in the field). Make sure you have your type number available.

If your transmission is in a million pieces I can help you get it back together. There is no diagram for the transmissions.

Sep 18, 2009 | Dewalt 18 Volt Compact Drill Kit

1 Answer

Dewalt 18v drill dc988 type requires switch


Hello,
Here is a link for a parts diagram for your model. It has the proper part number that you will need.
Hope this helps.

http://www.toolpartsdirect.com/cgi-bin/schematic.cgi/dewalt/DC988KA_TYPE_1

Sep 07, 2009 | Dewalt DC988kar XRP 3 - speed 1/2" 18v...

Not finding what you are looking for?
Drills Logo

Related Topics:

372 people viewed this question

Ask a Question

Usually answered in minutes!

Top Drills Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

EugenesDIYDen
EugenesDIYDen

Level 3 Expert

479 Answers

John Mock

Level 3 Expert

932 Answers

Are you a Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...