Question about Hitachi 43FDX20B 43" Rear Projection Television

1 Answer

Hitachi 43fdx20b Need capacitor but i dont know which to buy!!

I have replaced the convergence ICs on my Hitachi 43fdx20b but I accidentally crushed one of the ceramic capacitors on location CK24...... think (but im definatly not sure) that its a 150pF 50V cap.

Any help would be awesome!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,139 Answers

Hello Soleftright,

I have CK24 as a 1000pf 50v cap. Look at CK25 it is the same value as CK20 - CK24. Were your convergence ICs STK392-110s? One side of the cap goes to pin 14 of the (IK-04) IC and the other to ground.

I hope this helps
Thank you,

Shuttle83

Posted on Nov 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Problem with Hitachi 43FDX20B 43 in, Rear Projector TV


Install a convergence repair kit for your model should solve the issue your model uses the DP15K convergence repair kit which is available from www.tvrepairworld.com the kit contains the two ICs associated resistors and the CD with repair instructions.

Jul 17, 2012 | Projection Televisions

2 Answers

U shaped screen distortion top and bottom, ghost/double images


This is a convergence problem that can be as simple as poor solder connections at the convergence ICs or defective ICs. If you feel comfortable working inside the set where there are potentially dangerous high voltages, please update this and additional details and guidelines will be provided.

Thanks,
Dan

Apr 06, 2010 | Hitachi 43FDX20B 43" Rear Projection...

1 Answer

Half the screens convergence is out..whats up with this


Ur convergence is dead.The 2 convergence ICS is dead,and some or all the resistors.Must replaced the 2 convergence ICS and all the resistors.Know how to solders?Buy a convergence kit at Tv repair World.com,tvrepairkits.com to repair it ur self.The shop will coat u $300 for parts and labors.

Feb 16, 2010 | Hitachi 53FDX01B 53" Rear Projection...

2 Answers

WANT 2 KNOW 43FDX20B HITACHI TV IC NUMBER NAD PART NO


Hello,

You can find OEM IC's for this model (43FDX20B) from a major Hitachi parts distributor on the link below:

Hitachi 43FDX20B Replacement Part IC

If you contact them and provide the generic number or location number of the IC, they should be able to provided you with the needed parts.

Apr 02, 2009 | Hitachi 43FDX20B 43" Rear Projection...

1 Answer

HItachi 43FDX20B Rear Projection TV Convergence Problem


Replace both STKs Use StK 329-180s if set is using110s,120,150s, I havent heard of anyone yet getting shocked from replacing ICs.

Feb 09, 2009 | Hitachi FDX Series 43FDX10B 43" Rear...

1 Answer

Hitachi 43FDX20B 43 in. Rear Projection Television magic focus


Hi, replace the convergence IC`s and any fried resistors and chemical fuses (if any), do not push magic focus anymore it will not correct the prroblem and it will evenntually corrupt the DCU and cause you more problems (and of course more money), questions? ask awayy, video-tek

Feb 02, 2009 | Hitachi 43FDX20B 43" Rear Projection...

2 Answers

What dose a convergence board look like?


This is what the convergence PWB looks like. Its located on the extreme right side of the chassis looking in from the rear of the set.9cc0c04.jpg

Nov 27, 2008 | Hitachi 43FDX20B 43" Rear Projection...

2 Answers

Double picture 3d


You need new Convergence ICs post the model number and I will post the numbers you need and where you can get replacements with free instalation instructions with pictures

May 13, 2008 | Hitachi 43FDX20B 43" Rear Projection...

2 Answers

Hitachi 43fdx20b


well i had the same t.v. and u will have to set the picture tube which is really simple it ight seem hard but if you need an hand give me an call 1-403-362-2560 and ask for jason

Dec 17, 2007 | Hitachi 43FDX20B 43" Rear Projection...

1 Answer

Hitachi 43fdx20b blurred Picture


Yes this is a normal diagnoise. Just about every Tube type projection TV set ever made will one day need these IC's replaced. They are not really that hard to replace but you would need to know how to solder and unsolder on printed circuit boards, know the procedture, and then have a service manual handy to adjust the convergence after yoou replaced the IC's. If the tech works on alot of these types of TV sets's, most likely they could adjust them without having a service manua handy. This repair done by a pro should run you anywhere from 250 on up to 400 bucks depending on who does the repair and where. Good Luck

Mar 31, 2007 | Hitachi 43FDX20B 43" Rear Projection...

Not finding what you are looking for?
Hitachi 43FDX20B 43" Rear Projection Television Logo

Related Topics:

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hitachi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...