Question about Envision EN-985e Monitor

2 Answers

My computer monitor is blinking on and off

I have tried shutting the system down and unplugging it but it doesnt stop it from blinking on and off

Posted by on

  • 2 more comments 
  • cascardid Oct 21, 2008

    both the green power light and the screen blink at the same time. The screen goes black for about 2 seconds then flashes the actual screen as it should be then goes black again.

    I cant get the screen power to turn off no matter what I do - Ive tried holding the power button in but it wont power off

  • Lillian Pitt
    Lillian Pitt May 11, 2010

    monitor keeps blinking on & off

  • Fran Bednar
    Fran Bednar May 11, 2010

    What is blinking on and off, the power button or the screen itself ? Do you see any picture ?

  • catty Jul 20, 2013

    Mine keeps switching to a black screen then normal again... its the shift key.. some key of "delete" and "command" worked last time, but i forgot what it was.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What if the stickey keys had the option of:

  • Lock modifier keys when press twice in a row
  • Turn off stickey keys when two keys are pressed once.
I turned them both off, and I pressed shift, now it's blinkin, flickering, flashing. I stopped it before, it was by pressting the delete key and some command key?

Posted on Jul 20, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 159 Answers

You will have to have your power board and inverter redone. This is probably a transistor problem that is causing the flashing. You could also have a few bad capacitors.
I do a lot of monitor boards via ebay. I haven't done this model yet.
If you take it apart and send me pictures, I can tell you what to look for if I see anything.
bammbammfran

Posted on Oct 21, 2008

  • catty Jul 20, 2013

    I pressed the shift button and this iswhat i get?

  • catty Jul 20, 2013

    I mean it starts to flash... go to black screen and then back to regular screen.... it won't stop

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Battery not recognised/not charging


Turn the computer off, unplug it, take the battery out. Then hold the power button down for 10 - 15 seconds. Plug the ac adapter back in, but do not put the battery in yet. Boot the computer, then shut it back down. Put the battery back in then boot it again. It should recognize the system now.

Jul 31, 2014 | Sony VAIO VPCEA36FM/W Laptop

1 Answer

System doesn't get on after shut down


Check the system BIOS. I know that in certain HP systems you can disable the power button so that it doesnt do anything. It's to stop the system being accidently shut down

Jan 26, 2014 | HEWLETT-PACKARD Hewlett Packard HP...

1 Answer

My Dell E196FP monitor flashs colour when computer shuts down and power is still on


my guess would be that the monitor cable is loose in one end or its missing pins have you tried a different cable?

If that doesnt work try to find the correct driver for your monitor that matches your operating system.

Dec 09, 2010 | Dell E196FP 19" LCD Monitor

1 Answer

Sceptre x24 has suddenly stopped working. Monitor


if you are using integrated video, your integrated video is fried, done gone. if you have a pci or pcie or vga video card, its gone or blown or dead as a doornail. replace the video card and youll be up and running again

Jun 04, 2010 | Sceptre X24WG-NAGA Monitor

1 Answer

Monitor blinking but will not come on


most of the time the blinking is a form of error message from the monitor depending on how many blinks in between each pause lets service technicians know which breaker fuse or transistor needs to be replaced
I would suggest taking it into a computer repair store and have them attempt to fix it however alot of the times its cheaper to just buy a new one

Hope this helps
Robb

Apr 26, 2010 | Dell E193FP 19" LCD Monitor

1 Answer

System is not workin properly


You might try this. Shut down the computer, disconnect power cords, disconnect everything at the back of the computer, mouse, key board, etc. Open the case, ground yourself by touching an unpainted area of the case and remove the power connectors to ALL optic drives and floppy drive if you have one. (Of course do not disconnect the hdd.)
Reconnect mouse, keyboard, etc., and power cords to wall outlet.
See if it will post now. If it does I say you have a faulty power supply.
I was given a computer which was doa. It would not post, after I tried the above routine it posted then booted to windows.
I replaced the psu and now the computer works fine.
Hope this helps!

Blunderbuster

Feb 02, 2009 | Computers & Internet

1 Answer

No display


Try Unplugging the monitor and plugging back in again,,,you dont have to shut the PC down to do this,,,if it starts backup,,,then good... if it doesnt,,then you need another Monitor.
An LCD monitor is better for your eyes anyway.

Jan 19, 2009 | AOC 1556NB 15"

1 Answer

Black screen; blinking power light


are using dvi cable did u try to hit the input botton on screen itself thx nick

Feb 07, 2008 | Samsung SyncMaster 204B 20.1" LCD Monitor

1 Answer

Monitor doesnt shut down


I doubt its the monitor, it maybe your apple computer or graphics card. Can you offer more detail, or describe the actual shut down procedure?

Mar 01, 2007 | Apple Cinema HD 30" LCD Monitor

1 Answer

Monitors on/off green light flashes


Try first unplugging the monitor and the computer from the wall for 12 to 24 hours. If this does not work, hook up another monitor to the puter to see if the problems with the puter or the monitor.

Sep 22, 2006 | Dell E171FPb 17" TFT LCD Flat Panel...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

1,183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Envision Computers & Internet Experts

Cleverer2

Level 2 Expert

298 Answers

Steve

Level 3 Expert

3287 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you an Envision Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...