Question about Ricoh Aficio AP4510 Laser Printer

1 Answer

Can i have solve my proplem is sc 542 - Ricoh Aficio AP4510 Laser Printer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 903 Answers

Sc542 is a fuser code that needs to be reset by a service technician. It may be just a dirty sensor or it could be something more serious. Contact your local Ricoh service tech for assistance.

Posted on May 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I solve the sc 542 error problem on Ricoh aficio sp 3510dn printer when it does not have an online button or a number keypad?


You need to switch the power switch off.
Hold down either the online & escape or stop/start & escape while switching the machine on.
The machine should start up in service mode.
Select 1 for service mode
Select 5 for mode
Scroll to 810 SC reset and select enter
Select execute.
Switch machine off and on again.

Jun 22, 2016 | Ricoh Aficio SP 3510DN

1 Answer

Error sc 542


this is a fusing error
change the set of thermisters in the fusing unit

Jan 20, 2014 | Ricoh Aficio CL3500N Laser Printer

1 Answer

I have copier it given me this code SC 544 & SC 542 & SC 500 can you assist me please .


overload of the main motor or fusing unit (SC 500)

Look at your fusing unit, (rollers, thermistor, lamp, gears...)

and don't forget to reset SC code in SP mode.

Good luck

Jul 03, 2011 | Ricoh Aficio MP 161 Black and White Copier

1 Answer

Hi, i have a error code SC 542 but i don't see Yellow Key [clear modes] button on control panel please send me deatil moeen_rauf@yahoo.com


SC 542 Heat roller warm-up error and for that you will need a technician since the machine may need some part replacement .

Feb 15, 2011 | Ricoh Aficio CL7200 Laser Printer

1 Answer

Error code sc542 happened right after power outage


Sc 542: is fusing problem.
perform the following proceder to solve this problem:-
press Clear all __107__clear (hold clear for 5 second )
press 5 __ R __ 810 __ R __ print
turn off on.

Jan 17, 2011 | Gestetner 2212 Digital Imaging System...

1 Answer

I have ricoh aficio mp1600 & this machine is error occoured Sc:542 how to solve this problem?


To clear level A SC codes such as this SC541, you need to
Enter SP mode, and then turn the main power switch off and on, only.
Please check if the thermistors are the proper ones and are installed correctly in their position properly.
This is also useful for SC542.
Please check the thermostats and fusing lamps for open circuit.

Good luck and please rate me, thanks.

Dec 03, 2010 | Ricoh Aficio MP1600SPF Copier

1 Answer

Service Code SC 542


That is fuser code and needs to be reset in the service mode, it will not go away by turning the off and back on.

May 29, 2009 | Ricoh Aficio 1027 All-In-One Laser Printer

1 Answer

Im having an error sayig SC:542 so how can i solve this kid of problem?


This is a 'fuser" warm up error. You could have a blown out heater lamp, or fuse, but most often this is caused by a power fluctuation. The reset for this is done by simply entering the service mode, and turning the machine of/on with the main power (red button).
enter service mode as follows:
"Clear Modes"
" 1, 0, 7 "
then hold "Clear/Stop" for 2-3 seconds.
The display will change with "service mode" in the top corner.
Now turn power off/ on (red switch)
** Never go further into the service mode, as you can cause all kinds of difficulty.
If the code comes back, then you will have to get a technician on site to troubleshoot the fuser.


Please rate me :)

Apr 24, 2009 | Ricoh Aficio 1515MF All-In-One Laser...

5 Answers

Ricoh Aficio MP 2510 SC 541, SC 542 Errors


To clear level A SC codes such as this SC541, you need to
Enter SP mode, and then turn the main power switch off and on, only.
Please check if the thermistors are the proper ones and are installed correctly in their position properly.
This is also useful for SC542.
Please check the thermostats and fusing lamps for open circuit.

Good luck and please rate me, thanks.

Jan 17, 2009 | Ricoh Printers & Copiers

Not finding what you are looking for?
Ricoh Aficio AP4510 Laser Printer Logo

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Printers & Copiers Experts

quennie732

Level 2 Expert

393 Answers

Bernard D'Souza

Level 2 Expert

161 Answers

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

181 Answers

Are you a Ricoh Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...