Question about LG Studioworks 45 14" CRT Monitor

4 Answers

Colors not distinguishable

I bought a LG Studioworks 452v model monitor at 2000. Recently my monitor started frequently change in color display. Now a days the color problem is permanent. Both red and black colors are shown as black, and other colors are also not shown properly.

Posted by on

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Colors not distinguishable

Try changing or replacing the display cable ....Simple as that... might work!

Posted on Nov 23, 2006

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Colors not distinguishable

The prob here is tht the cable has worn out and has loose connections/inter-connetions.thus the colour display takes up a differnt tinge when twisted in different directions. based on my personal experience i hav found out 3 ways to solve this prob. pick the 1 tht suits u. thus the solutions are:- 1) Open up ur monitor disconnect the 3 differnt connector pins n take it to ur local computer market, n ask for a replacement, usuallly u wil b lucky to gt an old wire, else ul gt a cable manufactured by another company that does not fit quite well.... wel, play around... cost: Rs. 0 to 150. 2) cut the cable at the point at which it causes the prob(for my monitor this was right near the connector).go to the local electronics market to buy the 15-pin connector that costs Rs. 15 only.. reconnect the wires to the same old order, refer to the cut wire... i think this is the best solution. 3)cal the samsung customer care and pay rs 800 to gt ur 5 year monitor fixed....( wch is utterly pointless). caio!!!!

Posted on Sep 01, 2006

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 105 Answers
Re: Colors not distinguishable

Your red color circuit in the monitor is defective. Most common problem is the color IC.

Posted on Aug 05, 2006

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 215 Answers
Re: Colors not distinguishable

Is your monitor by any chance sitting next to unshielded speakers or anything else which could generate an electomagnetic field? You can get some terrific colour shifts with these items. If you do have anything like this put some distance between them and the monitor. Also the auto degauss coil circuitry could be faulty in the monitor. Take it to a repair shop and ask the tech to degauss the tube and see what difference it makes. If it fixes the problem get him to check the degauss system. Don't try this yourself. There's lots of voltage running around inside a TV. Fix don't Fry BMW

Posted on Jul 01, 2006

3 Suggested Answers

  • 151 Answers

SOURCE: lg 563n monitor problem

Plz check your monitor's vga cable for ok .I think there is problem in 1,2,3 no pins wires continuity.If it is ok then check components thats are connecting these pin to video amp. ic on crt neck.If they are ok then change video amp. ic with new one.Hope this solution works otherwise i am always ready for help

Posted on Apr 02, 2008

  • 348 Answers

SOURCE: LG STUDIOWORKS 500G monitor dead ?

your irf 630 is not original purchase it from proper LG authorised service centre it is costly but never become faulty again duplicate mosfet overheats if your green led is on then measure voltage at E.H.T.connect meter at output transister if E.H.T. is producing then meter should show 1 digit if not then 50v will show take care that signal cable should be disconnected if E.H.T. is not producing then check +vcc at horizontal ic it should be 12v. if 12v is not present then check regulator ic 7812 insmps

Posted on Mar 14, 2010

Testimonial: "thanks a lot :)"

  • 109 Answers

SOURCE: LG Flatron W2234S 22 purple tint problem

your LCD monitor has bad ccfl lamps or inverter circut..

Posted on May 09, 2010

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

LG 700E CRT 17" monitor,

problem with the monitor Display cable. it is damaged.

Normally monitor will receive 3 colors red, green, Blue signals from CPU. If one cable i.e Red wire connection is missing in display cable which is connected to monitor, Red color image on monitor wil be replaced with other fade color.
So, need the replace the display cable or display connector!

Dec 09, 2010 | LG Studioworks 700S 17" CRT Monitor

1 Answer

Is it possible to change the color temperature on Studioworks 560N?

Much better if you change the color control on your PC. Or your desktop right click properties, On the Display properties click settings, under the setting select Advanced. Look for your videocard software control. It will let you adjust the Gamma, Contrast, Color control of your display properties.

Oct 21, 2009 | LG Studioworks 560N 15" CRT Monitor

2 Answers

LG studiworks CRT

The monitor needs to be repaired. The cost of the repair maybe too high. I suggest you get a quote first or gjust et a new LCD monitor.
Do not try to fix it yourself because there are high voltages inside these CRT monitors unless you understand display electronics and the dangers etc.

Oct 01, 2009 | LG Studioworks 563N 15" CRT Monitor

2 Answers

Moniter Display Problem.

Either cable contacts inside your monitor is not proper or the data cable is faulty. Monitor repair is required.

Dec 13, 2008 | LG Studioworks 563N 15" CRT Monitor

1 Answer

Dark colors

Increege LOT screen preset
check G2 voltage at neck board G2 cathode
remove Sg caps
replace G2 pf

Oct 26, 2008 | LG Studioworks 700S 17" CRT Monitor

1 Answer

LG Studioworks 452V LED's blinking

1. L O T Problem.
2. power supply out put problem
3. Drypoints at neck base.

Oct 21, 2008 | LG Studioworks 45 14" CRT Monitor

1 Answer

Dark display

dear mr faolib
the solution is to install a 250 ohm resistor between G1 and ground on the socket ,,,but you may change it more or less than 250 ohm . it well be lighter and you you can adjusted normally from controll panel

ghassan eid

Oct 20, 2008 | LG Studioworks 700S 17" CRT Monitor

1 Answer

Monitor horizontal adjust no function

It is the problem of horizantal section.Check horizantan hold transistor that is placed on hitsink of eht and two small transistors near iton pcb.and check horizantal yoke coil pins for dry soldring or low voltages.If thats are ok then change hori. &ver. deflection ic.
Hope this solution works.i am always for you

Mar 15, 2008 | Gateway FPD2275W LCD Monitor

Not finding what you are looking for?
LG Studioworks 45 14" CRT Monitor Logo

577 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Computer Monitors Experts

Cindy Wells

Level 3 Expert

4720 Answers

Lawrence Oravetz

Level 3 Expert

7159 Answers


Level 1 Expert

5 Answers

Are you a LG Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides