Question about Clarion Car Audio & Video

Open Question

Clarion diversity radio pu9887a wont take code code red light not on comes on sometimes when ignition is turned off.if you turn unit on holding the up^ button it says code in but still wont take code and code light is not on

Posted by on

5 Suggested Answers

Krazytech
  • 725 Answers

SOURCE: red light wont shut off

check to make sure your fill bucket is correctly placed back into the unit. there is a safely switch that will not let the unit work without the bucket in place..hope this helps let me know?

Posted on Aug 24, 2007

  • 518 Answers

SOURCE: The screen will not come out and the unit will not play. The blue light comes on to switch from radio/cd/tv, etc. and the red light comes on when you push cd eject, but otherwise it will not play any

MAKE SURE YOU PRESS THE SOURCE BUTTON AS THE SCREEN WOULD NOT COME OUT FOR THE RADIO BUT WHEN PRESSED AGAIN WILL PROBABLY COME OUT FOR THE TV

Posted on Jun 13, 2009

  • 4090 Answers

SOURCE: tv wont turn on.

What it is to have knowledge!

The red light is on the POWER side of the set and has no relation to it working or being guaranteed to work.
When you press the on button power is transferred to the relay which then connects the power to the rest of the set. In betwenn that and the components is a special component that detect power overload or opens circuits. If this is detected in milliseconds the unit fails to tuen the set on until all circuits read correctly.

I suspect like many who have new TV;s that it is now 18 months going on 2 years and out of its guarantee.

The power board and the sustain board either 1 or 2 has failed ( which is common on items being manufactrured in Korea) which is becomming the norm. It is also not DIY and repairs need knowledge special retuning tools and the list goes on. Estimated cost is about $300 for parts anhd an equal cost for labour. Dont throw your old analogue away, keep it and apply a set top box it will; still be operating when all these new poor quality tv's are long dead. Vive Made in America! Yours is not the only brand involved in this fiasco either LG sony samsung and a few others also use the same korean manufacturer for their boards.


Please rate my help++++Thanls for using FIXYA

Posted on May 20, 2010

xjosie
  • 10 Answers

SOURCE: Dell D600 Wont turn on sometimes.

Hi Friends,
Problem with Dell Laptops?
For solutions for your problem you need to visit a site by just Click Here .
For any hardware problem with Dell Laptop you can Click Here

Posted on Jul 23, 2010

  • 4748 Answers

SOURCE: got a clarion radio in

The full solution is here (for free)

CLICK HERE

Posted on Mar 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just brought clarion cd player had it fitted by vauxhall dealer and when i put the key in the ignition turn key to aux cd wo'nt come on but when you turn the key to start engine cd player...


Sounds like the unit was not wired into the car properly..the dealer needs to make sure that the switched lead that they connect the red wire from the radio to is hot when in both run and aux(accessory) positions on the ignition switch...it sounds like they may have wired the switched lead to the wrong accessory lead

May 26, 2011 | Clarion Car Audio & Video

1 Answer

I need a wiring iagram for a 1980 clarion radio & CB for a honda goldwing can you help


clarion radio!!!!!!!!!!!!!!!!!!!!!
yellow battery
red accessory
black ground
purple right rear + speaker
purple/black right rear -
green left rear +
green/black left rear -
white fr left +
white/black fr left -
grey fr right +
grey/black fr right -
blue auto antenna
blue/white rem amp
brown phone mute
orange/white illumination

with the cb just connect the red and black wires upto the red and black on the radio then the cb wont switch on until u turn the accessories on

pls rate people arnt rating hope this helps

May 09, 2010 | Clarion DB245 CD Player

1 Answer

Clarion pu 1570 radio cassette not responding


If You know the code:
1. Turn radio On
2. Display say "Code in"
3. Enter the Code by memory station buttons (4 digits)

If You enter wrong code for the first time:
1. Turn radio off.
2. Turn radio on
3. Press and hold the band "~" button
4. Display shows ====
5. Wait till display say "code in"
6. Enter the code by mem. station buttons.(4 digits)

Important:
You mast wait by Radio ON in = = = = condition,
and not in - - - -!
The max. waiting time is 90 min.

TIP:
Tested by PU-1570A Eeprom 93C46
1. Radio Off
2. Press and hold the Band "~" Button.
3. Turn the radio ON
4. Enjoy!

Apr 22, 2010 | Car Audio & Video

1 Answer

I have a clarion fmc100 cd disk changer from like 1993 that came with my silverado when i bought it recently. it's old and the guy just sold it with the truck.... long story short, i know it has power to...


hi red wire is a constant positive , the black wire is your negative earth, and the yellow wire is you ignition live ie when you turn your ignition to the on position it becomes live, then when you turn your ignition off it stops being live.......hope this helps

Feb 21, 2010 | Clarion FMC200

1 Answer

Clarion 3475 speakers wired, player wont turn on


The RED from the clarion wire must be hooked up to a switched power source ... that was wired to your old radio, then press the reset switch, and it should then turn on.

May 05, 2009 | Clarion DRB2475

2 Answers

CHANGED BATTERY IN 93 SAAB 900 NOW MY RADIO WON'T WORK


Someone put the wrong security code in the radio. Hold the DNR button down and the code will clear. Be sure you have the correct code to enter after clearing the current one.

Jan 24, 2009 | Clarion ABD340MP AM/FM CD/MP3/cassette...

2 Answers

INTERMITTENT POWER PROBLEMS


Sounds like you have intermittent contact between the constant 12v and the ACC 12v power inputs. Remove the head unit, and make sure that the connections are properly insulated. (using inline **** connectors preferably)

Aug 25, 2008 | Clarion DXZ375MP CD Player

2 Answers

Clarion radio wiring diagram


Usually the yellow is for ignition switched-red is permanent +...;)

Aug 03, 2008 | Clarion ARX6670Z Cassette Player

2 Answers

Help with install on clarion vrx935vd


I love Clarion
1st RED is + direct to battery
Yellow is + pwr to ignition so when you turn the car off the radio can still say on if you choose
black is - and ground
these are importantant first. once you have pwr you can easily work out which of the 8 other wires are pairs 2 frnt spkrs and 2 back speakers if theres 2 extra plugs for the amp or woofer(if screws run a nice thick speaker wire. But with Clarion I dont beleive you need an amp or woofer thats how good they are just have kickass speakers frnt an back
you should be able 2 find the pwr cables from the existin radio if not the yellow wire leads to the igniton and you can run a red wire staight to the battery and screw the black wire to the metal chasis(oh the blue wire is for a pwr antenna or aux and is not needed unless youve got a pwr antenna.
your speaker color code will be like eg.grey and grey with white stripe,will be one pair green another pair ,but the 4 spker pairs are skinner than th pwr cables
Spkrs have a + and - too the difference is you cant blow the spkr by trial and error its just if its wrong it will sound muffled so try both ways then youll know whats best. pwr must be correct make sure red on red and blacks on black then press on then play with your speakers then find the yellow cable that runs to the ignition then to the radio so when you turn the ign the radio comes on and when you turn the motor off you can turn the radio on cos youve also got a direct to battery connection.
Man you are gonna love your sound system
Im happy for you
Clapster

Feb 24, 2008 | Clarion VRX935VD Car DVD Player

1 Answer

Memory wont hold on AVIC-N2


Buy a cheap 12 volt tester pen from Radio Shack, and make sure your constant(yellow) always has power no matter  what position your ignition is and your accessory(red) only has power when the ignition is turned on. Some time those after market adapters are wrong(they are after market for a reason).

Aug 27, 2007 | Pioneer AVIC-N2 Car DVD Player

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Clarion Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4737 Answers

yadayada
yadayada

Level 3 Expert

66126 Answers

Marco Avila
Marco Avila

Level 2 Expert

49 Answers

Are you a Clarion Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...