- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
try to reset it.below is the step by step instruction on how to reset it.
1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
2. Press and hold the Menu and Center (Select) buttons
simultaneously until the Apple logo appears, about 6 to 8 seconds. You
may need to repeat this step.
Tip: If you are having difficulty resetting your
iPod, set it on a flat surface. Make sure the finger pressing the
Select button is not touching any part of the click wheel. Also make
sure that you are pressing the Menu button toward the outside of the
click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power
adapter and plug the power adapter into an electrical outlet, or
connect iPod to your computer. Make sure the computer is turned on and
isn't set to go to sleep. Try resetting the iPod while it is connected
Say "Thanks" by clicking the thumb icon in the post that helped you.
Please click "YES" in solution that solves your problem as "was this helpful?"
Hello, and thanks for using FixYa! The reset is actually format. Go into the menu and find format. Accept the format device and it will reset everything. If this was helpful, please take a moment and rate the solution! Thanks, and Good Luck!
hi i guess i can help but i need u to follow this steps okay??
1/ dissemble the unit
2/ locate the battery
3/remove the connections using the soldering tool
4/use direct 12V wires of AC/DC adapter to chok the battery.
5/get it on it place using the previous tool
6/turn it on and see
The same thing happened to me and i had no idea what to do. I tried e-mailing the creative headquarters but they wouldnt give me any advice. Finally i realized that there is a reset button on the botom of the player that i never noticed before. If you hold in the play/pause button, hit the reset button, and then release then play/pause button it should take you to a screen where it gives you options on what to do with your player. What i did was reboot it and nothing happened. Whatever you do, DO NOT hit format, or else you will lose all of your picture and music files. I got really frustrated with this problem so glad i could help out.
Why does technology make you work for what you already paid good money for? Have you tried going into Recovery Mode? You do this by holding down the Play/Pause button while triggering the Reset button. Once there, you have four options. Try selecting Disk Cleanup and then Reboot. You might need to re-Sync a few things but it's worth a shot. Good luck.
To Reboot your sansa e250 without removing batteries . Switch to hold position ( right beside headphone jack ) Press and hold menu and rec buttons at the same time untill screen resets. On my player lock up usually happens when it hits a corrupt song - try to delete and reload the culprit to minimize future lock ups. Hope this helps someone out there.