Question about Toshiba 65H82 65" Rear Projection Television

2 Answers

Wavy picture When I turn on TV the picture is so wavy it is unviewable. After about 10 minutes it would gradually clear and was fine. Now the waviness never goes away completely. TV is approx. 1.5 years old. This problem started about 5 months ago.

Posted by on

  • xxroc7xx May 04, 2009

    tv real wavy at start up gets better with time . although now never truley clears up. HD channels still come in clear though. and does this on all inputs

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 26 Answers

This is caused by a bad convergence module, and there are probably some dried out electrolytic caps in the circuit as well. i have one in the shop right now that came in with the same problem. if you have it serviced, make sure they replace all of the convergence modules (there are usually 2, but sometimes 3 of them), because if one went bad the other(s) is likely to go out soon as well.

Posted on Jun 28, 2006

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a Toshiba 42H81 with the same issue.
5+ years old. Paid $1450 and got great use out if it with no problems.
wavy picture started slowly about 2 weeks ago.
Is this a complex fix for a typical repair service? Anyone know what a fair cost to repair is for this issue?
Thanks

Posted on Dec 02, 2007

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

techman
  • 3130 Answers

SOURCE: Toshiba - 50H13 Projection TV

There is a large metal case behind the input board in the back of the set called the hyper board that needs to be replaced.Good Luck

Posted on Oct 08, 2007

  • 1030 Answers

SOURCE: bad picture until tv warms up

this is a very common occurance in these sets. toshiba has issued a servece bullteen with this set. Sorry to tell you this but this is a problem with some very small capacitors on what is known as the hypermodule. in my shop we fix 2 to 5 of these a month. you really have to know how to solder. Idealy replace the hypermodule is the best way. but......that board is hard to find. so we replace these 11 very very small componets with twezzers and a big magnifier. we charge about 250 to 350 for this repair.

Posted on Oct 08, 2008

  • 1030 Answers

SOURCE: Mitsubishi 55" Projection TV / Horizontal Wavy Lines at Start Up

this is very common with these sets. the fix is to replace 11 very very smal capacitor on what is known as the hypermodule. The ideal sitation is to replace the hypermodule. if you can find it. I can do this repair. I have done about 10 at the shop. if you need to i would suggest finding someone who is very experence in surface mounted repair

Posted on Jan 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toshiba/ 42H81 / hyper board


You can either yrplace your Hyper board, or replace all the serfice mount capacitors in it. The cap replacement fixes this 90% of the time.

May 09, 2012 | Toshiba 42H81 42" Rear Projection...

1 Answer

Mitsubishi WS-55613 55in.


1. "wavy" may mean a signal problem inside the set--are you seeing colors out of position or skewed around letters etc?

2. Does it do it when a DVD is played? (this will rule out certain things).

SD TECH

Apr 21, 2012 | Mitsubishi WS-55613 55" Rear Projection...

1 Answer

When you turn on the the TV the picture is good with in a minute or so the Picture turns wavy and has a double image. I can turn it off, then turn it right back on the picture is good for any where a...


Hello,

The problem with the television is the lamp. It is faulty that is why the screen turns wavy in minutes.

The solution to that is to replace the light and your television will be in good condition once again.

Take care

Oct 10, 2010 | RCA P52926 52" Rear Projection Television

1 Answer

Colored wavy lines on screen


This is a Logic board problem, not so easy to replace in Hitachi but well worth the repair if I had your zip code I could recommend a person or three. But the problem is a problem in the logic board and will beed replacement, Thanks for using Fixya.com

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

May 14, 2009 | Hitachi P42H401 42 in. Plasma HDTV

2 Answers

Wavy picture


It looks like you have a convergence problem here, probably a defective convergence IC.

Mar 06, 2009 | Mitsubishi WS-65513 65" Rear Projection...

1 Answer

Wavy picture


It is capacitors in your TV set. If you fix it before the set goes out, you will save about a grand. Contact me @ techman32k@yahoo.com

Mar 24, 2008 | Mitsubishi WS-65513 65" Rear Projection...

1 Answer

Wavy picture for Toshiba Model 50H12 Rear projection TV


In general, these problems are usually caused by leaky output filter capacitors in either the low voltage power supply or, depending upon the type of waviness you're attempting to describe, it could be in the vertical deflection circuits (either the vertical oscillator or vertical amplifier). I would estimate cost to repair from $200 to $350 dollars, depending on how long it takes to find the problem. It most likely though is a component issue in the circuitry.

Dec 28, 2007 | Televison & Video

1 Answer

Wavy picture except when displaying a 1080p image


Elsewhere! Bad hyper board =bad caps on board need replacement = find a different tech who has heard of this repair or
have him research fixya / Toshiba/ 42H81 / hyper board ......T.

Oct 14, 2007 | Toshiba 42H81 42" Rear Projection...

3 Answers

Wavy picture


@unclejed ahem, what convergence module please?? the set has only one module and that is the DCU. so you have one in the shop,yes? are you sure you know what you are doing? by your description you don't and just get the real technicians out of work. do you think that is fair to rob us of work we need to make a living??

Aug 22, 2007 | Mitsubishi WS-55809 55" Rear Projection...

Not finding what you are looking for?
Toshiba 65H82 65" Rear Projection Television Logo

Related Topics:

1,806 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75888 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...