I have a HP 2200C scanner. I don't have the drivers for them.
The only ones I can find are the sj646en.exe from the HP website and other sites. When I download and open the file it installs a program from streamtofile.com it's a stream tv program... It's driving me crazy..
Has anyone one got any suggestions....
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello: Try going to Hp solutions website and download the updated drivers for windows 7. Usually the drivers come with windows operating system. But you may need a new driver for the unit to work correctly.
That one does not support windows 7 but you can install the driver for xp and it might work first uninstal all drivers for the scanner do this go to systems and hardware remove all the old drivers and then install the driver that is most recent like xp or vista,
You need to download the scanner drivers from the Compaq/HP WEB support/download page. Make sure you select your model laptop and the XP or Vista Windows version of the drivers you require and install them. Click on this link to download the drivers: - www.compaq.com/country/cpq_support.html
Below is the link where you can go and download the drivers and firmware for the HP Scanjet 2200C Flatbed scanner.
Click Here to download
Please let me know if you have any further questions or concerns.
You could purchase vuescan, but quality is not like the scanner's own software under Windows XP. For some (but not me) it helps to install the hp driver in the compatibility mode (>properrties >compatability, select Windows XP (Servicepack 3)) then install with the scanner unplugged. After installation do the same (>properties >compatability, select Windows XP (Servicepack3) for all exe files in the folder with the scanner software, Than plug the scanner. It often works, but if not (like in my case) I don't know why.
HP does not have a driver for this scanner with either Vista or Windows 7. One workaround is available in Windows 7 Pro or Ultimate. You can set up the XP mode and install the scanner within the virtual computer. Scanned files may need to be put on an external drive to transfer them between the two "computers".
First make sure you have downloaded the current version of the software for yourOS.
Next, uninstall the software that you have already and reboot the system. Now reinstall the software, plug in the scanner only when instructed to do so in the software. Try that and post back with results.
You will first have to preview the document and then save it..
Older scanner that were around in Dos day - Win 95/8 Are not compatable with NTFS systems. However this one thing to try. Go to my computer/Help/and type /Compatability This computerfacility that allows the computer to run as Win 98- It may just work.