Question about Cameras

1 Answer

My canon is not powering on. I have the battery fully charged but nothing will turn on.

Posted by on

  • annpetschl Oct 20, 2008

    You know I think it might be full. Now I tried to download on my computer but wouldn't do anything since wouldn't power on...any suggestions.
    thanks so mucn.


  • laurieteach Jan 02, 2009

    I powered it up and went to use it - nothing. Not even a blimp. Almost like there is no battery

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Expert
  • 49 Answers

I had this problem with a Sony Digital Camera once. The memory card was full and it would not power on. I replaced the camera and was preparing to throw it away and tried turning it on one last time and only then did it briefly display a memory full error then quickly shut itself off.

I erased the memory and afterwards the camera worked fine.

So, check and make sure your memory card isn't full. If it is unload the contents onto your computer, erase it and try again.

Posted on Oct 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon sx50 hs Power button not working


Obviously the battery is not powering the camera. That could mean many things. There is a break-down in circuitry in the camera and you need to turn it in for a professional check-up.

Jun 18, 2015 | Canon PowerShot SX50 HS Digital Camera -...

2 Answers

Canon 60d will not turn off. worked fine a minute ago. it's new. nothing responds now. battery fully charged. lcd display on, but not on live view. what to do?


Take the battery out for 60 seconds and then re-seat it back into place and power up the camera, if this fails! return it since the item is under warranty.

Feb 28, 2011 | Canon Cameras

2 Answers

No power - fully charged battery


How about cleaning the battery contacts in the camera first with a pencil eraser and then, with a cotton swab lightly dampened with rubbing alcohol.

Aug 02, 2010 | Canon Rebel XT / EOS 350D Digital Camera

1 Answer

My canera turns on and immediately turns back off


hi i bought a canon powershot 780IS and it isnt powering on..the lens came out then the whole camera shut down...nothing works and the battery is fully charged..

Dec 10, 2009 | Pentax Optio A10 Digital Camera

1 Answer

Camera will not turn on. Battery fully charged;


Hello,
You can give it to an expert for repair, he can repair it for less as there must be just a fuse problem, which can be fixed for a very less amount.

Aug 10, 2009 | Canon PowerShot SD750 / IXUS 75 Digital...

1 Answer

Canon A95 Cannot be switched off


Hello there,
The E18 error is related to the LENS not able to retract fully. If it is still under warranty, I would advise you bring it to the nearest service center. This is to avoid further damages. Otherwise, you can try a few things below.
There are a couple of things you can do.
1. Turn it on and then off. Spray canned air around the lens.
If trick 1 will not work out, try this.
2. Make sure the battery is fully charged. Turn on the camera and then give it a couple of firm whacks on the side. Make sure nothing is blocking the lens and wait for it to fully retract.
Let me know how it goes.

Jul 05, 2009 | Canon PowerShot A95 Digital Camera

7 Answers

My Cannon G9 digital camera wont power up even though I have a fully charged battery?


This is usually from a loose screw inside the camera, a screw inside the camera can come loose and cause a short which is very common on the G9. If you go to: www.camerasandparts.com all they deal with is service for the Canon Powershots. They're great if you need a hand with one of these and they automatically do the no power correction on the G7's and the G9's they service which is nice. They are about the least expensive out there at $89 and they include the service and the shipping back. The best part, they do excellent work which is a must for me. Hope that helps you some.

Aug 17, 2008 | Canon PowerShot G9 Digital Camera

1 Answer

Camera will not power on or off and battery is fully charged


The symptoms you describe sound very much like a failing battery. How old is your battery? Rechargeable batteries are only meant to last for a couple years, regardless of use.

Apr 03, 2008 | Canon PowerShot SD400 / IXUS 50 Digital...

1 Answer

Canon S2 IS won't turn on with rechargeable batteries??


I would let them charge til you get an indication that they are done. TV remotes require very little power to operate, while digital cameras need a lot, so that's why the batteries would work in the remotes though not fully charged.

Jun 16, 2007 | Canon PowerShot S2 IS Digital Camera

Not finding what you are looking for?
Cameras Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cameras Experts

kakima

Level 3 Expert

98767 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

63572 Answers

Are you a Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...