Question about HP OfficeJet G55 All-In-One InkJet Printer

1 Answer

G 55 Office Jet error code

I relocated my computer from downstairs to upstairs EVERYTHING is working great but my HP G 55 Office Jet. I get "Initializing" on the copier LCD, then I get "Error c00e0402" What kind of code it that? I have tried turning the printer on and off and I still get the error code.

Posted by on

  • colonfel Dec 28, 2008

    Initializing and the error code c00e4202. there is a solution posted that it probably is a main board. How much is a main board worth?



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 87 Answers

Are all the lights flashing....probably a main board.


Posted on Nov 06, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

2 level townhome- the upstairs is heating to 68 degree-thermostat is located but the downstairs is like 58 degrees.The vents are open in ceilings downstairs. How can we do to get more heat downstairs

close ceiling vents
the hot air down stairs rises through the vents and adds to the upstairs heating
same as hot air goes up the stairs to the upper rooms

Dec 27, 2017 | Heating & Cooling

1 Answer

My telephone connector is downstairs, and I want to have my PC upstairs - but I do not want to run wires around the house. Is there any way I can connect my computer wirelessly. i.e router downstairs,...

Yes, a wireless router should work fine.
You'll need a wireless-adapter (either internal PCI add-in card, or external USB stick) in your computer, if it does not have built-in wireless capability.

May 22, 2011 | Computers & Internet

1 Answer

I have 2 Thermostat's in my home. My heat works well upstairs but not downstairs. My thermostat downstairs won't come on but I unhooked the thermostat from downstairs and tried it upstairs and it worked...

Hi, sounds like you determined the problem is not with the thermostat. That leaves the furnace that serves downstairs. What type heating system do you have?

Jan 13, 2010 | Honeywell Programmable Thermostat Heater

1 Answer

Hi, I have a digital tv plugged into an extension cable in an upstairs (Toshiba) bedroom; it works perfectly - receiving all channels. I have a digital tv downstairs (Samsung) where it seems the wall...

Hi Fiona
Somewhere along the line from the aerial there must be a signal splitter that feeds the upstair and downstair terminals.
Try to find that splitter and switch the output to see if the problem goes from up to downstair.
If it does switch then you know the problem is with the splitter block, and if it stays the same then the problem is with the cable and/or the connectors that run downstairs.
Also the reason you get a pixellated(snowy) picture is because of signal loss during the length of the cable you ran downstair.
If running a cable downstair becomes the best option to fix your problem , then you could buy a cheap 10db signal booster/r.f amplifier to correct the signal loss and a cable splitter to feed both tv`s
That booster would be installed upstair in your case(near the source of the signal to be amplified).
I could send you a small diagram if need be. Hope this will help and Merry Chrismas

Dec 14, 2009 | Televison & Video

1 Answer

I moved our computyer from downstairs to upstairs.

Power supply is bad,,

You can try to unplug the main motherboard plug, then plug back in,, It should last as long as it stays pluged into the wall.

Keep it pluged in when you do this,,

Nov 30, 2009 | HP Compaq Presario SR1410NX PC Desktop

1 Answer

Cant connect to internet with main computer, one upstairs is fine

The upstairs computer is wired or wireless ?

If the upstairs computer is working then the router must be working properly.
Check the connection between the downstairs computer and the router.
If it is a wireless computer then check the wireless connection status on that computer.
Click Here for step by step solution

Nov 05, 2009 | Belkin Computers & Internet

1 Answer

Trying to connect a wired network wirelessly to a router

No. You'll need to run a "cross-over" Ethernet cable from one of the "LAN" ports on the "downstairs" router, connecting to the "WAN" port on another router that you will need to buy, and place "upstairs", and connect the 4 devices to the 4 "LAN" ports.

Or, run a long "straight-through" Ethernet cable from your DSL-modem (or cable-modem) that is "downstairs", and move your wireless router "upstairs", and connect the 4 devices to the router's "LAN" ports.
Your laptop "downstairs" should still be able to connect (wirelessly) to the wireless-router that is "upstairs".

Sep 16, 2009 | Gateway Belkin 54g Wireless DSL/Cable...

1 Answer

A/C blows weak/low volume of air through vents

I f it is fan that has more then one speed if you run it all the time,it may
not be on high sample : low fan speed runs all the time
med fan speed for heat
high fan speed is usually for air conditioning so if everything is good then it maybe the relay.

May 02, 2009 | Carrier Heating & Cooling

1 Answer

Linksys WAP54G connection to WRT54G

Ok, so why do you need an access point upstairs and a router downstairs connected wirelessly? If you can't connect with a laptop or a pc, why whould you think you could connect the access point? The purpose of this configuration would have to be with the access point to the router via ethernet. What's the point? If the problem is range, check out to enhance the capabilities of the WRT54G... and maybe building a parabolic antenna for it as well. Plans to do so abound at

Sep 05, 2007 | Linksys Wireless-G WAP54G 802.11g/b...

Not finding what you are looking for?
HP OfficeJet G55 All-In-One InkJet Printer Logo

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

102366 Answers

Ben Johnson

Level 3 Expert

685 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides