Question about Pine Technology Mach 4 KT400ANB Motherboard

Open Question

Pine Technology Mach 4 KT400ANB Motherboard

I have the above mentioned mb and it will boot up sometimes, and now it will not boot. Replaced case with 400 watt pwr supply, and since i did that it will send a video signal sometimes for only about 4 minutes while i try to reload OS, XP home, now i cannot get it to come on at all. It is an AGP 8mb video, my board only houses AGP or PCI.
Please help any way you can please.

baflores43@yahoo.com

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
sandrew
  • 2961 Answers

SOURCE: system don't Reboot

Assuming you have already installed the AGP driver for the motherboard, you will have to start the pc in safe mode (F8) on boot up, to start in VGA mode only and see if the graphics are ok. If it boots into VGA mode then the card itself is ok, but the card driver and agp motherboard driver, if not already; will need to be installed at this point because im assuming you were not able as you were getting the fault on screen.

Posted on May 01, 2007

Ad
sandrew
  • 2961 Answers

SOURCE: pc don't reboot

just incase you didnt get a solution from your last post, see this link:- http://www.fixya.com/support/t145701-system_dont_reboot

Posted on May 18, 2007

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2nd monitor doesnt work either


Ensure your are running the monitors in dual mode still. Open your Nvidia Control Panel and click on "setup up multiple displays" Then on right panel you should see where to select your option on how to run the 2nd one. You might need a driver update from Nvidia, especially if you recently took an update from Microsoft.

Hope this helps
ps Here is the link to Nvidia: Click Me

Sep 26, 2009 | Pine Technology XFX GeForce 7950GT, (512...

1 Answer

My computer will automatically shut its self off. When power flow is present, computer turned off or on, there is a red LED at the bottom left corner that is always on. I have a XFX nForce 750i SLI...


You either have a Hard drive that is busy packing up or your processor is running too hot or the memory chips are busy packing up. You can start by checking the THERMAL paste of the processor and the cooler fan of the processor. Inside the CMOS setuip you should be able to see what temperature your processor is running. It should be more or less be between 30 and and maximum of 50 degrees celcius

Jul 07, 2009 | Pine Technology XFX NFORCE LT 680I SLI...

1 Answer

Compatible memory


This motherboard can support 2-1gb ddr ram chips

Mar 09, 2009 | Pine Technology Mach 4 KT400ANB...

1 Answer

My monitor is blank.


then open the pc case and remove the graphics card then start it up then reinsert it.. then reinstall the graphics driver.

Jan 06, 2009 | Pine Technology XFX GeForce 7950GT, (512...

1 Answer

Just Bought The Mach 4 tried to test it with current power supply


Hi, one quick thing you can check is to see if the cable running from the power switch is plugged onto the right pins on the motherboard, it will most likerly say (pwr btn) next to the pins or something like that, it may also need to be a certain way round.Let me know what the outcome is if no good we can try something else. hope this has helped. Thanks

Onlinepc-Fix
lee

Mar 18, 2008 | Pine Technology Mach 4 KT400ANB...

1 Answer

Computer does not boot (new Machine)


Swap the power supply since you got two systems?

Feb 23, 2008 | Pine Technology XFX NFORCE LT 680I SLI...

1 Answer

Pc don't reboot


just incase you didnt get a solution from your last post, see this link:- http://www.fixya.com/support/t145701-system_dont_reboot

May 18, 2007 | Pine Technology TLSI211004 Motherboard

1 Answer

System don't Reboot


Assuming you have already installed the AGP driver for the motherboard, you will have to start the pc in safe mode (F8) on boot up, to start in VGA mode only and see if the graphics are ok. If it boots into VGA mode then the card itself is ok, but the card driver and agp motherboard driver, if not already; will need to be installed at this point because im assuming you were not able as you were getting the fault on screen.

May 01, 2007 | Pine Technology TLSI211004 Motherboard

Not finding what you are looking for?
Pine Technology Mach 4 KT400ANB Motherboard Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pine Technology Computers & Internet Experts

EKASYS IT SERVICES
EKASYS IT SERVICES

Level 2 Expert

171 Answers

Jerry Umali

Level 3 Expert

979 Answers

 Ian Kayhan
Ian Kayhan

Level 2 Expert

125 Answers

Are you a Pine Technology Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...