Question about Manhattan 1100 Computer Speakers

1 Answer

Limited audio output

There is no audio coming out of my front speaker output (green) but there is for sub and side (black and orange) any ideas on what to do?

Posted by on

  • 1 more comment 
  • Rider  harrison
    Rider harrison Oct 20, 2008

    (theese arent the speakers im using i accidently posted under them)


  • Rider  harrison
    Rider harrison Oct 20, 2008

    I have checked all the volume controls tried to update the driver roll it back etc but none of that has worked


  • Canaan Hoffman
    Canaan Hoffman May 11, 2010

    Check to see if your driver program for your audio device has the green port switched off

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 45 Answers

Try your option of speaker under the classification from realtek...because if you have 4 speaker the quadraphonic option should be adopted....
check your compatiblity
and from digital output optionuncheck the mute front panel box

Posted on Feb 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi .. i have just bought a logitech x 530 speaker and only 2 of the speaker parts work .. can you please give me some solution advice?


Hi names Rui i like to help you by giving you step by step instruction in propely hocking up your logitech speakers:

Instructions

1. Connect the black plug of the rear right speaker into the black plug on the subwoofer.

2. Connect the yellow plug on the rear left speaker into the yellow input on the subwoofer.

3. Connect the red plug of the front center speaker into the red input on the subwoofer.

4. Connect the white plug of the front left speaker into the white input on the subwoofer.

5. Connect the d-sub connector plug from the front right speaker into the d-plug connector on the subwoofer.

6. Connect the green, black and orange input to the matching plugs on your computer. If you have a four-channel sound card, connect the green plug from the input audio cable to the front plug of the card and the black plug to the rear plug. Do not connect the orange input. If you are using a two-channel sound card, connect the green plug from the input audio cable to the "Line Out" jack on the sound card. Do not connect the green and orange plug.

7. Plug the subwoofer power chord into the electrical power outlet.

8. Place your subwoofer on ground around your computer desk. Position the front center speaker on top of your computer monitor.

9. Place the left and right front speakers on the sides of the monitor. Position the left and right rear speakers behind you, making sure they are pointing toward the front left and right speakers.

10. needs to support 5.1 surround. Normally, more than three sockets for sound indicates that it does. Then you need to use the software that comes with the sound hardware to configure it for 5.1 - Default will be 2.1 or just 2.
Check the control panel out. This is a lot easier under Windows 7.- Here you can access what you need via the speaker icon on the system tray (right click)
There is NO problem with your OS or hardware, this is pretty standard...

hope this will help you solve your problem.

Jul 18, 2011 | Logitech X-530 Computer Speakers

1 Answer

I don't know which port in the back of the Pavilion to connect the black wire from the speakers (that connect to the right speaker with red and white ends). Any ideas? They are labeled as side, rear...


To get "surround" sound, when you face the computer, you will have:
* 2 front speakers, one immediately on each side of the computer
* 2 side speakers, one on each side of your head
* 2 rear speakers, one behind each side of your head

Thus, when the sound is of a jet-plane coming towards your face,
you'll first hear the sound in the front speakers,
then in the side speakers,
and finally in the rear speakers,
to produce a sound-effect of the jet passing over your head, and going "behind" you.

Usually, for "front" speakers, one speaker connects to the other speaker, and the second speaker connects to the "FRONT-audio-output" connector on your sound-card.

For side speakers, one speaker will connect to the LEFT-side-audio-output port,
and one speaker will connect to the RIGHT-side-audio-output port.

For rear speakers, one speaker will connect to the LEFT-rear-audio-output port,
and one speaker will connect to the RIGHT-rear-audio-output port.

Jun 01, 2011 | Computer Speakers

1 Answer

I've hooked up all the speakers. NOTE: I didn't read the instructions, as they are lost and I recently moved. I'm sure everything is right, I've read on here about this problem. I have the pea-green,...


Typically:

Lime green (pea-green) is front speakers.
Orange is for center speakers and sub-woofer.
Black is for rear speakers.

Pink is for microphone in.
Blue is for line in (MIDI or similar).

Mar 10, 2011 | Logitech Z-5300 Computer Speakers

1 Answer

I got a new motherboard, and the back only has a pink, green, and blue color for the jacks. However, these logitech speakers have a green, pink, orange, and black. i have the green and pink in and my...


PINK -- if you have a microphone, connect it here

GREEN -- if you have a headset, or you have external speakers, connect it here,
to get 2-channel stereo output ("left" and "right").

BLUE -- if you have an iPod (or iPod Touch), or audio-cassette player, and you want to feed the "audio-output" from those devices into a program that will record the sound on the "line-input" port on your computer, then you need to connect this port.

Since your new motherboard does not support 5.1 audio-output, you need to purchase a sound-card that has GREEN and PINK and ORANGE and BLACK sockets, so that you can get sound into the "middle" and "back-left" and "back-right" speakers.

Or, just connect the GREEN, to use your speakers in two-channel mode.

You'll also need to access the web-site for the manufacturer of the motherboard, to download the correct device-drivers for the audio-hardware embedded onto the new motherboard, in order to get _ANY_ output out of your sound-card.

Feb 17, 2011 | Logitech G51 5.1 Multimedia Surround Sound...

1 Answer

Need 5.1 not 2.1


Easy dear! Go to ur sound manager/ audio input output tab\ set ur speakers from 2 speakers to 6 channel speaker... Now perform test. U will hear sounds from every speaker.
Note: Ur sound manager is on ur system tray found near ur desktop clock... a brown colour most of the time

Feb 06, 2010 | Logitech X-530 Computer Speakers

2 Answers

X-530 logitech surround speakers how do I install please


coming from the speaker with volume control, there is a cable with 3 jacks, connect them while your computer is running, yellow to pink, green to green, black to blue. a window should open asking what you connected. green is front, yellow is center/sub, black is rear

Dec 27, 2009 | Logitech X-530 Computer Speakers

1 Answer

Bought a set of logitech speakers - using with my dell laptop. But the speakers have a triple input (black orange and green) but the computer seems to have only one output - green


This means that your speakers have surround sound capability. The black one is for the REAR L-R sound, the orange one is for the CENTER sound, and the green is for the standard stereo FRONT L-R sound.

Your computer only has a green slot, so it means it does not support surround by default. You should simply insert the green speaker jack into the green slot on your laptop, and you should be good to go. The orange and black ones aren't necessary at all, so it's fine to ignore them for now.

Dec 12, 2009 | Dell A215 Computer Speakers

3 Answers

Green light on speakers and sub. No sound - only hissing noise


open volume control & remove check from mute button.

start-program-acessories-entertainment-volume control.

Sep 17, 2009 | Computer Speakers

1 Answer

How can i plug in my logi tech speakers on my new dell computer,


  1. Make sure the rear and/or center/sub audio cable is plugged in to the correct port. On most surround sound cards, the rear audio port is black, the front audio port is green, and the center/sub audio port is orange. If you do not have a surround sound card, make sure you obtain the proper adapter (discussed in the next paragraph) or use surround sound emulation if your speaker system offers it. If you are not sure if you have a surround sound card, please check with the manufacturer of your sound card for details.
  2. Make sure your sound card supports the same amount of channels as your speaker system contains. For 4.1 systems, it should have a front and rear speaker jack on the card. For 5.1 systems, the card should have a front, rear, and center/sub, output. The card should be properly installed and configured. Please contact your sound card manufacturer for details. If you do not have a surround sound capable sound card, you can use the M3D button on the controller unit (if you own a z-560 or z-540) or use the source selector switch (if you own a z-5300 or x-620). If you do not have any of the models above, you can use an adapter to split the signal for the front and rear speakers. This type of adapter is a 3.5mm male to 2-3.5mm female jacks. You can purchase this adapter at your local electronic store. Please refer to your manual if you do not know if your speaker system can emulate surround sound.

Nov 11, 2008 | Logitech Z-560 Computer Speakers

1 Answer

No sound


Hi,

To my knowledge, a Logitech X-540 does not need a driver to operate. However, it is the sound card in the PC that would need drivers. Further, the sound card should be capable of 5.1 surround sound system and should have three (3) sound output which includes. All of these would have individual jacks to match the different plugs of the X-540 (green, black and orange plugs). The X-540 in turn would output the 3 inputs to front pair, rear pair, center and sub woofer. The green goes to the front L/R, the black to the rear L/R and the orange to the center/sub.

Perhaps you can post back with the brand/model of your PC , and your soundcard or motherboard. Knowing your OS would also be helpful.

Hope this be of help/idea. Pls post back as requested, how things turned up or should you need additional information.

Good luck and kind regards.

Feb 03, 2008 | Logitech X-540 Computer Speakers

Not finding what you are looking for?
Manhattan 1100 Computer Speakers Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Manhattan Computer Speakers Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

508 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Are you a Manhattan Computer Speaker Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...