Question about Hoover Washing Machines

Open Question

My Hoover New Wave Plus 5 washing machine stopped mid-program and displayed "Error Code E5". What does this mean?

Posted by on

5 Suggested Answers

SOURCE: Hoover Vision 1600 AAA Washing Machine error code 5

High summerzaman,
the error mean an problem by the temperatur sensor of the water. It is possible an defect of the sensor or cable between the sensor and the microcontroller or the controller self.


with regard Andreas

Posted on May 07, 2008

  • 2 Answers

SOURCE: hoover " eco wave 5" wa 1000 help

haha found out that just afore the pump in the hose was 2 pounds! ! Hehe, the coin saved the bill! :-)

Posted on May 11, 2008

blueextc3221
  • 15935 Answers

SOURCE: I have a hoover vhd8142 washing machine that stops mid cycle

It appears your timer/main controller/CCU has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question $#@!

Posted on Sep 19, 2010

  • 6277 Answers

SOURCE: my new hoover washing machine

Hi from retired Englishman in SW France,

Sorry but I do not know your particular machine so I am guessing BUT I would suggest as a first step that you check the drain motor lint tray/filter. So many 'faults' are caused by blocked filters. My following general guidance notes should assist although not all of them will apply.
-------------------------------------------------------------------------------------------------------------------------------------------
If you are unsure where the filter is, it is often behind the front lower (kick) panel (or in some machines at the rear in an awkward position!) and held in by a round cover/knob.

REMOVE POWER AND ENSURE YOU HAVE A WATER RECEPTACLE/RAGS TO SOAK UP THE WATER WHICH IS BOUND TO POUR OUT!

It's surprising what people have found in theirs! It is always worthwhile checking it on a regular basis.
Now- whilst the filter is removed it is normally possible to see the drain motor and ensure it is not jammed by a foreign object such as a needle or a toothpick. It should be able to be turned by hand/finger- the power IS OFF!
At this point it is also possible to test if the motor works. No clothes or water in the machine, select a spin cycle and put the power back on. You should be able to see the motor turning at some point, possibly straight away. If it doesn't work then the motor is malfunctioning!

Hope the filter is the problem and good luck!
John C

Posted on Feb 23, 2011

  • 6277 Answers

SOURCE: I need to download an

Hi from retired Englishman in SW France,

(start rant) It still amazes me that new washing machines, other than those sold in the UK, seem not to have manuals placed inside the drum/tub! I think that purchasers should demand one from the vendor and threaten to go elsewhere if it doesn't supply the goods! (end rant)

Of course the manual could have been lost ;-0)
Now- unfortunately FixYa cannot provide manuals direct - members of the forum are just people from all over the world, probably working from home, and not representing any particular manufacturer.
???
Manual
You will need to type into your search engine/web browser '(make model number) washer manual' and you should be presented with a number of sources from which you can either download for free or have to pay a nominal amount.
You could also try the manufacturer's web site direct ;-0)

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C.

Posted on Sep 09, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error E1 for washing machine


Lots of info on E1 for different makes.

  • How to repair a Samsung washing machine with error code E1 ... https://www.quora.com/How-do-I-repair-a-Samsung-washing-machine... How do I repair a Samsung washing machine with error ... If your Samsung Washing Machine is showing error code E1 then ... How do I clear bosch washing machine error ...
  • E1 error in washing machine? ' Yahoo Answers https://in.answers.yahoo.com/question/index?qid=20131129013237AA7oiKP
    • RESOLVED
    • 7 POSTS
    • 6 TOTAL ANSWERS
    2013-11-29 · E1 error in washing machine? ... Haier washing machine error code E1? LG Wave Series Washer LE error message? Washing machine error code? ...
  • My washing machine is displaying an error code. What does ... www.samsung.com/my/support/skp/faq/1033803 My washing machine is displaying an error ... E1. Water supply error. ... · Check that the level of the drain hose is not lower than the base of the washing machine.
  • Related searches for Error E1 for washing machine
  • Samsung Washing Machine 4E and E1 Fault - Help & Advice https://www.northlondonappliancerepairs.co.uk/error-codes/samsung...
    • 4.3/5
    • 46 RATINGS
    Samsung Washing Machine 4E and E1 Fault. Samsung washing machine Not filling in allocated time error code 4E and E1 Fault.
  • Help & Troubleshootings - Haier ZA Products Website www.haier.com/za/help_and_troubleshootings/faq/washing_machine Help & Troubleshootings. ... Too much water in the washing machine ... Error Code-control panel display "E1" Question : Error Code-control panel display "Lock"
  • Samsung washing machine error code 4E and E1 Fault Not ... www.youtube.com/watch?v=cFlnxeB0P0g
    • BY HOW-2-REPAIR.COM
    • 9 MIN
    • 19K VIEWS
    2015-11-24 · Video embedded · ... machine-error-code-4e-and-e1-fault-not-filling-in-allocated-time/ Samsung washing ... Samsung washing machine error code 4E and E1 ...
  • Samsung washing machine error code 4E, E1, Fault Not filling www.how-to-repair.com/help/samsung-washing-machine-error-code-4e... Samsung washing machine Not filling in allocated time error code 4E and E1 Fault This is essentially a fill timeout error which will normally mean that either the ...
  • Hoover error code E1 - White Goods Help www.whitegoodshelp.co.uk > ... > Washing Machine Error Codes Hoover error code E1. ... You need to watch the washing machine to see when it aborts to get an idea which of the three areas to look at.

  • Jul 01, 2016 | Washing Machines

    1 Answer

    Hover OPD 714 D 7kg . What does E08 mean


    http://service.hoover.co.uk/manuals/OPH714D_1.pdf


    user manual

    http://www.whitegoodshelp.co.uk/hoover-error-8/

    here is a description of the common error your machine has
    and how too solve it

    hope it helps you...


    Mar 04, 2015 | Washing Machines

    1 Answer

    Showing error E5


    E5 is error code 5.
    It means the water is not filling correctly (or the sensors are not noticing the fill correctly). Make sure the water supply is on and hoses are not kinked. If all water supply is ok, then the valve(s) may be bad. They are expensive so best checked and replaced by a technician.

    Jul 29, 2014 | Bosch WAB28060GB Maxx White 600 mm Washer...

    1 Answer

    Hoover code eo4


    Call the service for this product.

    Feb 01, 2014 | Washing Machines

    1 Answer

    Error E5 on Balay ts7210 washing machine


    This is a door lock problem can be door lock or main PCB

    Dec 20, 2013 | Washing Machines

    1 Answer

    Hoover washing machine showing H05 error


    Error code: h05 coming up when i switch on the tumble - Fixya

    www.fixya.com/support/t8443068-error_code_h05_coming
    Feb 24, 2011 - Question about Washing Machines. Open Question ... SOURCE:Hoover washer/dryer VHW854D SHOWS ERROR. I have exactly the same ...

    I have a 3 month old Hoover washing machine [DYN10146P ...

    www.fixya.com > Forum > Washing Machines
    Aug 11, 2011 - I have a 3 month old Hoover washing machine [DYN10146P] with aH05 fault. ... Have just looked in the service manual, it reads: Error 9 - Cancel the programme by returning the selector to the OFF .... show e-60 on screen.

    Hoover and Candy Washing Machine Error Codes - YouTube

    ? 5:00
    https://www.youtube.com/watch?v=kzhlvB2LjXg
    Sep 1, 2014 - Uploaded by eSpares
    Does your Hoover or Candy washing machine stops before .... I have a question: My Hoover displays the error code E08. what can I do to fix it?

    Nov 18, 2012 | Washing Machines

    3 Answers

    Error code 8 on Hoover vision hd 9 kg frontloader. No Manual.


    Had same problem wouldnt spin found clip on motor had come loose pushed it back on problem solved!

    Nov 18, 2008 | Hoover AAA160 Front Load Washer

    1 Answer

    Error code e04 on hoover washing machine


    called hoover and they replaced the washing machine

    Jul 27, 2008 | Washing Machines

    3 Answers

    Hoover Vision 1600 AAA Washing Machine error code 5


    High summerzaman,
    the error mean an problem by the temperatur sensor of the water. It is possible an defect of the sensor or cable between the sensor and the microcontroller or the controller self.


    with regard Andreas

    Apr 11, 2008 | Washing Machines

    2 Answers

    Program don't start, flashing ligths (start and "delay start" button) for 5 times.


    What does the error code mean do you have any idea Is it mentioned in the Hand book. At any rate logic suggests a watewr supply problem that the first thing a washing machine needs - water. So a tap not turned on a Kinked hose An inlet valve solenoid failure- Three things for you to check

    Jul 31, 2007 | Hoover Nextra HNWL 3136 Front Load Washer...

    Not finding what you are looking for?
    Washing Machines Logo

    Related Topics:

    226 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hoover Washing Machines Experts

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    Gerry Harvey
    Gerry Harvey

    Level 3 Expert

    1456 Answers

    Chris Hall
    Chris Hall

    Level 3 Expert

    842 Answers

    Are you a Hoover Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...