Question about Cuisinart DCC-1200 Coffee Maker

1 Answer

Won't brew all the water comes out the bottom of the maker

Have been havint this problem for about a week - put the water in - it doesn't brew all the water into coffee. It's taking 1 hr to get 3 cups of cofrfee! Now the water leaks out the bottom.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,596 Answers

Cuisinart – leaking from bottom
There is a tube inside that is melted, damaged - cannot get this part from manufacturer. I would call Cuisinart to see if you are still in warranty.
Here is the basic troubleshooting for the Cuisinart coffee makers:
Make sure all baskets are in proper place – especially if unit is beeping.
Do not use a paper and a gold-tone or other permanent filter at the same time.
Unplug for LONGER THAN 15 full minutes to reset.
Clean by brewing 2 oz of distilled white vinegar/2 oz water.
If these methods fail, the unit probably requires replacement – call Cuisinart as they have a longer-than-standard warranty.
-Tha Mp3 Doctor

Posted on Dec 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Water puring out underneath Gaggenau coffee machine


The water in unit is fed via a hose to the heating element. If the hose is broken or disconnected the water never reaches the element and spills out the bottom nice and cold.

If you remove the bottom panel the problem will be instantly obvious.
OR put water in unit and see where it comes out of!!!!!!!!!

Aug 30, 2015 | Gaggenau CM 200-630 Aluminum Espresso...

1 Answer

Water dropping from the bottom to the floor. And, coffee coming out too slow( drops ) with or without sound that accompanies coffee when dispensing. I used to wash the Brew unit once in a week but hav


The sieve could be at fault. But I'd also check all of the high pressure lines going into and out of the brew unit. It sounds like one of the lines is leaking. You can replace them yourself or have a repair shop do it. You can probably find the hoses at

http://www.saecoparts.com/

http://www.saecoparts.com/Royal_Parts_s/1875.htm%3Fsearching%3DY%26sort%3D13%26cat%3D1875%26show%3D150%26page%3D1

Feb 03, 2014 | Saeco Royal Professional Espresso Machine

1 Answer

It turns on makes noise but it doesn't brew


  • Clean the puncture needle with a paper clip. It has 2 holes.
  • Turn unit off for a few minutes, remove and replace the water tank. Turn back on.
  • If all fails unplug, remove water tank, turn over and slap it on it's bottom. I know, sounds silly but it works!

Feb 08, 2013 | Keurig Elite B40 Coffee Maker

1 Answer

Coffee maker turns on but will not brew


why question to all of this is with a "self clean" button, why doesn't it every tell you to clean it..... ??

Sep 07, 2012 | Cuisinart DCC-1200 Coffee Maker

1 Answer

Won"t brew the coffe right and hot water coming


Hi,

Here is a tip that I wrote that will give you some things to try that will helpyou get your Keurig coffee brewer workingagain.

Keurig CoffeeBrewer not making a full cup of Coffee
heatman101

';
[[]\';

Jul 22, 2011 | Keurig Platinum B70 Coffee Maker

Not finding what you are looking for?
Cuisinart DCC-1200 Coffee Maker Logo

438 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cuisinart Coffee Makers & Espresso Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Cuisinart Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...