Question about Apex Digital GB4308 43" Rear Projection EDTV-Ready Television

2 Answers

Apex Digital GB43HD10

PLEASEM HELP ME, WHERE IS THE ANODE LEAD, AND WHERE IS THE POWER SUPLY, MY TV WILL NOT COM ON AT ALL, NO POWER!

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Remove all screws from the back of the TV. Then on the bottom of the front of the TV, remove 2 screws. You can then slide the guts out far enough to get to the power board. I took in a stray cat that decided to mark his territory by **** into the left speaker. The power board is behind and below that speaker. I removed the power board, brought it to a TV repair guy, and he soldered a new wire onto where part of the board burned. $5, and he solved my problem.

Posted on Mar 22, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I was watching My Apex Digital GB43HD10 one night and i smelled smoke the TV went blank i lost all power, i called the repair man and he came and looked at it and replaced the thermosat and it solved the problem.

Posted on Nov 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Apex Mod# GB43HD10 The picture is now blurry or wavy.


Sounds Like your convergence ICs big black ICs will part number on them example STK394-020 Call Mats for Parts on ICs 1-800-628-1118 Also Call Encompass you can order whole Board if you want to you just unplug old board and plug in new 1-800-638-3328

Oct 01, 2009 | Apex Digital GB43HD09 43" Rear Projection...

1 Answer

My Apex GB43HD10 pictures disappears after a while, sound works.


possible solder connection in the powersupply needs to be
resolderd it shouldnt cost much

Sep 15, 2009 | Apex Digital GB5108 51" Rear Projection...

1 Answer

No picture on it.just went out or off


thecnical problem may be it a fuse on the main board or power supply.

Sep 04, 2009 | Apex Digital GB43HD09 43" Rear Projection...

2 Answers

Color


yes those ICs will work in your model. You can get replacement ICs and free instalation instructions at the following link.
http://servicemanuals.vstore.ca/

Sep 06, 2008 | Apex Digital GB43HD09 43" Rear Projection...

1 Answer

Apex model GB43HD10 need instructions for service menu



Decrease vol to 0 on remote. Then press menu on the front panel while holding mute on the remote. An s appears on upper left side of screen. Press pip Ch+ to scan menu, Press CH+ or - to select and press VOL + 0r- to adjust items

Jun 16, 2008 | Projection Televisions

1 Answer

What is an anode wire


the anode wire is a heavy red wire in a projection tv there will be three
be careful the anode wire carries the high voltage.

Feb 19, 2008 | Apex Digital GB4308 43" Rear Projection...

3 Answers

Tv power light blinks but it won't turn on apex gb43hd10


I've seen this problem several times on this model. Your TV is going into shutdown because the HV block is defective. You can take out the Anode lead and isolate it carefully then turn the set on. If it now turns on, and stays on, then the high voltage block is bad. Getting this part is another, bigger problem.

Feb 12, 2008 | Apex Digital GB4308 43" Rear Projection...

2 Answers

Apex GB43HD10


You can get the part at Vance Baldwin parts. I am not sure of your boards part number, but it sjould be 8667204170T
here's the link hope it helps.
http://www.vancebaldwin.com/products/?APX&start=101

Jan 16, 2008 | Apex Digital GB4308 43" Rear Projection...

1 Answer

Apex GB43HD10 REAR PROJECTION


You did better than me. 1 year one week.

Aug 21, 2007 | Apex Digital GB4308 43" Rear Projection...

1 Answer

GB43HD10 PROBLEM


The circuit board on the right hand side is either cracked or the soldering came loose, I took mine apart and found it by mistake, everytime I pulled up the board i had picture again, so I propped up the board with some dumb-dumb and it has still been working, there are no parts for this TV

Mar 10, 2007 | Apex Digital GB43HD09 43" Rear Projection...

Not finding what you are looking for?
Apex Digital GB4308 43" Rear Projection EDTV-Ready Television Logo

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apex Digital Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Are you an Apex Digital Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...