Question about Whirlpool 24 in. ADP5966 Free-standing Dishwasher

2 Answers

My dishwasher has a fault

Ok, I have a WhirlPool Dishwasher ADP 5966 and it says i have a Fault F8. 1. I don't know what this is and 2. I don't kno how to fix it Please help Thank You Sweety_cj

Posted by on

  • 1 more comment 
  • Anonymous May 11, 2008

    When I set the dishwasher to start a programme, it soinds as though water is trying to get into the machine. Moments later the machine starts to bleep and goes straight to the rinse cycle.

    There is some water in the filter at the bottom of the machine but no blockages as far as we can tell.

    Please help

  • Anonymous May 20, 2008

    f8 keeps flashing but nothing is happening

  • linuxmania Mar 14, 2009

    F8 flashes, this seems to be a common fault on this unit, well done whirlpool for not including anything but "consult engineer"



    There is water still in the bottom of the washer so it seems related to the waste yet I have checked the pipe all the way out to the trap with no fault...



    Has anyone got any information on f8 please?

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 641 Answers

I am not familiar with your dishwasher, but could you explain the problem you have (does it stuck, on which stage etc..)and maybe this information will allow us to help you.

Posted on Jun 25, 2006

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 3 Answers

PULIRE IL SENSORE DI ACQUA STOP POSTO SOTTO LA GRIGLIA DEL PORTA FILTRO CON UN SGRASSATORE E TUTTO FUNZIONA A MERAVIGLIA ( BAUKNECHT GSI 6600

Posted on Dec 27, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is error code F6 E5 in Whirlpool Dishwasher ADP 5510 IX ??? The dishwasher keeps stopping after 2-3 min of working.I haven't touched anything since the day I bought it (2 months ago)


Fault Code F5
Dishwasher Spray arms are clogged or otherwise malfunctioning
F6 Fault code
Dishwasher doesn't detect any incoming water despite the water inlet valve being open.

Nov 10, 2016 | Whirlpool Dishwashers

1 Answer

Our whirlpool dishwasher ADP 7408 is displaying a F3 fault and wont work. What is the problem?


F3 error fault code
The heating cycle is not working. The error is indicated after several electronic checks are done over a 25 minute period. Therefore if the heater heats too slowly or the heater is open circuit or indeed the electronic control PCB is defective, each of these will indicate F3. The twist is, if the NTC is fluctuating in its reading it also can indicate F3 and not F1.

Nov 14, 2010 | Whirlpool 33 in. ADP6830 Free-Standing...

1 Answer

F8 error on ADP 5966 dishwasher after water cut


f8 shows the filter is blocked ... ... check if filter is behind the panel under the door ...

Oct 31, 2009 | Dishwashers

1 Answer

Whirlpool


you have a water count problem
or a wv1 problem ist easy to solve

Jun 11, 2009 | Whirlpool 24 in. ADP5966 Free-standing...

1 Answer

Diplomat adp 8520 dishwasher no hot water


two things to check
check continuity thru heater
remove outer door panel and check for faults in wiring loom
get back to me is these are both ok

Nov 14, 2008 | Dishwashers

1 Answer

Error code f4 on my adp 5966 whirlpool dishwasher


Blocked waste outlet or maybe just a worn pump.
I fixed a new one today showing F4
I found a piece of broken glass stopping the waste pump.
Hope this helps
john

Aug 05, 2008 | Whirlpool Dishwashers

1 Answer

Whirlpool dishwasher ADP 4732AL


sound like you have a valty inlet valve if your model has the valve built into the hose you will have to replace the hose assy.

Mar 20, 2008 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Whirlpool ADP 5966 Dishwasher using the complete salt load in 6 washes and coating all the dishes in salt that would not rinse off. I filled the salt and 6 washes later it was requiring a new load of...


Hello, we are sorry to hear that you are experiencing this problem with the Dishwasher. We would recommend having a certified technician out to diagnose the problem. If you would like further assistance you can send your name, phone number, address, model/serial numbers and the date on which you purchased the Dishwasher to Whirlpool_Reviews@Whirlpool.com. Thank you.

Apr 17, 2017 | Whirlpool 24 in. ADP5966 Free-standing...

Not finding what you are looking for?
Whirlpool 24 in. ADP5966 Free-standing Dishwasher Logo

Related Topics:

1,016 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Oloyede Monsuru

Level 3 Expert

1417 Answers

Mike

Level 3 Expert

4348 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...