Question about Hitachi 53UWX10B 53" Rear Projection Television

1 Answer

Convergence this is the second time that I have had convergence problems with this tv. The first time the repair shop replaced the STK-110's with 160's and possibly a resistor or two. However the charge was $400.00. The TV is old and not worth putting another $400.00 into. Are there DETAILED and ILLUSTRATED instructions for replacing those chips. I have spent several hours looking for schematics and instructions online. Everything is a cost and I'm not sure it would help until after I've purchased. I appreciate any assistance. Jim

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 899 Answers

Those IC's (STK's) only go in one way , the pins are inline and have to be unsoldered or cut the stk pins , then hold the soldering iron on the bottom and pull the pins thru , but getting the old solder off with a solder wik is best
convergence - f87a3d4.jpg

Posted on Oct 19, 2008

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a couple issues. First, my screen is yellowing from the sides inward, and second, the picture seems a bit "blurry", even though it's set to 1080i and getting a signal from an HD...


The tv have a problems known as a convergence pictures problems it is dead.Tv have any colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?Yes,than the tv convergence board it is dead and the causes all of these problems.The tv convergence board must have be repair like replacing 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board to solved the tv convergence pictures problems.The tvs shops will cost u like $300-350 for parts and labors.

Aug 31, 2011 | Samsung HCM5525W 55" Rear Projection...

2 Answers

Focus Error I am getting double picture and the colors are off. When trying to auto focus the blue lines are wavy.


Replace Convergence ICs ,Big black ICs will have PN# on them example STK 392-110
Mats has ICs 1-800-628-1118

Jun 05, 2011 | Toshiba 42H82 42" Rear Projection...

2 Answers

Projecting double images


When convergence output ICs got failed, tv shows double image or 3D like picture. Replace convergence output ICs in tv to fix the issue. Local tv repair shop will replace it for you.

Jul 07, 2010 | JVC AV-56WP74 56" Rear Projection...

3 Answers

Double photo


Replace both of your STK ICs STK392-110s use 150s Mats has Them 1-800-628-1118

Jun 02, 2010 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

Picture looks like 3D tv without the glasses on. What's up with that?


Ur tv have a convergence problems,it dead.The convergence board have 2 STK convergence ICS,and some or all it resistors are dead.U must know how to solder,have soldering tools,and solder to solved the convergence problems.U must replaced the 2 STK convergence ICS,and some or all it resitors.Tries websites like Tvrepairworld.com,Tvrepairkits.com to buy a convergence kit to repair it ur self.The shop will cost u $300-350 for the parts and labors.

May 14, 2010 | Philips 51PW9303 51" Rear Projection...

1 Answer

My 60inch phillips hdtv won't turn on and i can


This problems,cause by the 2 STK dead convergence too.U must have soldering tools,solders and must Know how to solders?Must replaced 2 STK convergence ICS,and some or all it resistors.Tries websites like Tv repair world.com,Tvrepairkits.com to buy a convergence kit to repair it ur self.The shop cost u $300-350 for parts and labors.

May 07, 2010 | Televison & Video

1 Answer

My tv starts out fine seconds later turns blue then after 5 minutes goes back to where i can make out picture but has a blue tint.


Ur tv convergence are dead.U know how to solders?Must replaced 2 STK convergence ICS,and some or all it resistors.Tries websites Tv repair World.com,Tvrepairkits.com to buy a convergence kit to repair it ur self.The shop will cost u $300-350 for parts and labors.

Apr 06, 2010 | Panasonic PT-53TW53 53" Rear Projection...

2 Answers

The picture comes on and the three colors are red top green middle and blue bottom part of screen


Ur tv have a convergence problems,it dead.U must know how to do soldering to fix convergence problems.Must replaced 2 STK convergence ICS,and some or all it resistors to get the convergence automaticly to reset it self or need a little adjustment require.Tries Websites Tv repair World.com,Tv repairkits.com to buy a convergence kit to repair it ur self.The shop will cost u $300 for parts and labors.

Mar 24, 2010 | RCA HD56W66 56" HDTV

1 Answer

My Mitsubishi TV is about 12-14 yrs old. The


DLP projection tvs are bulky and have a design flaw in the convergence board the 2 STK convergence ICS alway dies constinely require replacement,if u use about 4 or 5 hours day in and day out.If the old Mitsubishi tv several years since is was repair,u use it alot?If yes,it time to retire it,and buy the refurbish Plama tv.Not,than get the old tv repair.U Know how to solders?Tries Websites Tv repair World.com,Tvrepairkits.com to buy a convergence kit to repair it ur self.U can go to You Tube type in Convergence problems will see a tutoring video in repairing 2 STK Convergence ICS.

Mar 24, 2010 | Mitsubishi WS-55511 55" Rear Projection...

1 Answer

Tv makes an interval chirp sound when turned on / TV is dead


Ur convergence is dead.The 2 STK convegence ICS are dead.Must know how to solders?Replaced the 2 STK convergence ICS will solved this problems.Tries Websites Tv repair World.com,Tvrepairkits.com to buy a convergence kit to repair it ur self.The shop will cost U $300 for parts and labors.

Mar 17, 2010 | GE 46GW947 46" Rear Projection Television

Not finding what you are looking for?
Hitachi 53UWX10B 53" Rear Projection Television Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69736 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...