Question about Splendide 2000S Vented Washer/Dryer

2 Answers

Replacement of a porthole diaphragm on a 802M splendide washer dryer

How tough is it? Do you have to remove all the tub etc. to do this? Can you get to it through the front or how do you get the clamps off?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thank you!

Posted on Dec 08, 2015

Remove the top and loosen the clamp around the spin tub. Remove the two screws on the hinge on the door to get it out of the way. remove the clamp around the diaphram in the door. This will require 3 arms and a trained monkey! Seriously, get 2 screwdrivers andat least one pair of pliers as this is hard! Slip a screwwdriver under the ring between the rubber folds. Slip another one opposite from this one and use a pliers to pull the ring free. Its hard but you can do it. Reverse the process when installing the new one. Make sure you have already aligned the inside up top for the air vent for the dry tube. Use a zip tie to seal that part around the dryer vent tube. Tighten the inside clamp before putting the ring back on the front! Have fun!

Posted on Oct 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wd2000 washer dryer combo timer advances around timer


If the program selector knob keeps turning, the machine needs to be reset.
Wait a few minutes for the drain pump to empty the tub, switch the washer-dryer OFF. Select one
of the Reset positions on the knob, then switch it back ON.
The link below will take you to the manual.
Hopes this helps.
http://www.splendide.com/manual_wd2100_2000s.pdf

Oct 12, 2014 | Splendide 2100 Vented Washer-Dryer

1 Answer

My Splendid Washer/Dryer Mod WE802 will not drain the water. Anyone with suggestions? I cleaned the drain filter, still does not drain water


Might be that the pump mechanism is stopped due to a foreign object (hairclip etc) Ours stopped the other day and it was just a hairclip. Working perfectly now.

Aug 29, 2011 | Splendide 2000S Vented Washer/Dryer

1 Answer

My motor yacht's Splendide Washer Dryer combo has nerver dryed the clothes


Thor Appliances - www.thorappliances.com - and LG both have machines that can replace the Splendide.

Aug 04, 2010 | Splendide Comb-O-matic 6200 Non-Vented...

1 Answer

Splendide 2000 Model Help Needed


I have the same problem with my WD802 "pre M". I have found this forum and it as helped me some. Here is one forum that might help you - http://applianceguru.com/forum2/17215.html - I think it's my control module, but I cannot find a test guide for my "pre M" WD802 module. I am Calling Splendide first thing tuesday to see if they have a tech manual for the "Pre M" models. Good luck with your WD802.

Jun 29, 2010 | Splendide 2000S Front Load Washer / Dryer

1 Answer

Broken door handle on Splendid 2100 RV Washer/Dryer Combo


The Splendide distributor in OR sells handles for about $45.

Jan 27, 2009 | Splendide 2100 Vented Washer-Dryer

2 Answers

Splendide 2100 no longer dries clothes


We had the same problem with our splendide 2100 top loader. If you remove the top cover, you will find 2 circular like black discs (the size of a dime) on the right hand side about 6 inches from the front. You need to push those down (with a very small blunt object) to reset them. Please make sure that you unplug your washer/dryer before you attempt this. Good luck.

Aug 24, 2008 | Splendide 2100 Vented Washer-Dryer

1 Answer

WDB1043M Bendix Washer/Dryer


I had the same problem. Then I discovered that the Bendix USA WDS1043 / WDC1024 is the same, or almost the same, as a Splendide Comb-o-matic 6000. You can find an extensive parts manual at
http://www.splendide.com/service/Combo_PartsBreakDown.pdf
and an owners manual at http://www.splendide.com/manual_wdc1024m.pdf

I think Splendide is still in business, in which case they may also be able to supply parts for the Bendix WDS 1043 M - check them out at
http://www.splendide.com/

They can also supply a replacement washer/dryer combo when your present unit finally dies.

Good luck with a great washer combo!

Colin

Jul 28, 2008 | Tricity Bendix WDR1040W Front Load Washer...

1 Answer

Broken Handle


Contact this person and his company. They have the handle kit for the WD-2100

Darrell Klein National Service Director
Westland Sales /
Splendide Combination Washer Dryers
15650 SE 102nd Ave.
Clackamas, OR 97015
503-210-3914
darrell.klein@westlandsales.com

Jun 30, 2008 | Splendide 2100 Vented Washer-Dryer

1 Answer

Splendide 2000S


www.splendide.com
1-800-356-0766 #5 (503-656-2280)
503-722-9202
service@westlandsales.com
Monday-Friday, 7:00am - 4:30pm (PST)

You may also want to try a RV retailer in your area, they may direct you to a used part.

Jun 10, 2008 | Splendide 2000S Vented Washer/Dryer

Not finding what you are looking for?
Splendide 2000S Vented Washer/Dryer Logo

Related Topics:

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Splendide Washing Machines Experts

Doug Adams
Doug Adams

Level 3 Expert

673 Answers

yadayada
yadayada

Level 3 Expert

60683 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Splendide Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...