Question about Lorex Weatherproof Color Day/Night Camera with 30 IR Leds CVC-6995CL

2 Answers

Video I installed 4 lorex cctv cameras but only 1 has video I cant seem to get video on three of the cameras. I can see they get power because the LED lights turn red but I get no video. I have been testing them with an old monitor so i have to do them one at a time. I had installed them before the huricane but i had no power supply for them so i just had them hooked up outside but not in side I don't know if you can help me, but iwould be very greatfull if you could

Posted by on

  • johnkyzar May 11, 2010

    Sounds like you have a connector problem. I would try to get a short prefabricated cable and connect to a monitor if possible. This would help determine if the problem resides on the cable or camera side. Hope this helps.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I HAVE NO INSTRUTIONS FOR MY MICROMARK MM23283 SO DONT KNOW HOW TO SET UP PLEASE TELL ME

Posted on Jul 06, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I HAVE A MICROMARK CCTV ITS A SCART TYPE IT TELLS ME IN THE INSTRUCTIONS TO PUT THE SCARTLEAD INTO THE SCART ON THE TV WHICH I HAVE DONE I AM GETTING THE PICTURE OK BUT THERE IS NO SOUND ALL I GET IS A HUMMING SOUND JUST LIKE YOU HAVE NOT TUNE IN THE TV PROPERLY I CANNOT TUNE IN THE TV AS ITS ON THE AV SO CAN ANYONE TELL ME WHY I AM NOT GETTING THE SOUND WHEN IT TELLS ME WHEN I PUT IN THE SCART THE SOUND WILL BE PICKED UP . OR COULD IT BE THAT ITS A TV COMBI VIDEO

Posted on Jan 12, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need Owners manual 4 Lorex LNC201


About 75,300 results (0.48 seconds) Search Results

    [PDF]LNC200 Series LIVE Ping Wireless Network Camera ... - Lorex

    https://www.lorextechnology.com/.../LNC200_SERIES_MANUAL_EN_...
    Oct 16, 2012 - If you require further installation assistance, please visit ... Thank youfor purchasing this Lorex wireless network camera. This user's guide refers to the following models: • LNC201. • LNC204. Contents. Before you start, make ...

    Lorex Support - product manuals and remote video monitoring

    https://www.lorextechnology.com/support/
    Lorex Support - Get online help for your setup problems using lorex self-serve and access your lorex information, products manuals and documentation. ... Find out all the ways you can get support and service for your Lorex products. ... Some products may have the Model Number located inside the battery compartment.

Jan 25, 2016 | Lorex Home Security

1 Answer

5 wire security camera wiring diagram


standard cctv camera wiring
red for + 12v
black for comm
yellow for + v (+video signal)
white for -v (-video)

Jul 09, 2014 | Lorex Corp SG6184S Weatherproof Mini Color...

1 Answer

Where the wires go to plug in and begin using


Standard cctv camera wiring
red for + 12v
black for comm
yellow for + v (+video signal)
white for -v (-video)

Jun 26, 2014 | Lorex SG6153 / Weather Resistant Mini...

1 Answer

How do you monitor only 2 channels at a time on a lorex securtiy system ?


that can't be happen because all CCTV system dvr or nvr just split into 1/4/9/16 camera

Jun 13, 2014 | Lorex Home Security

1 Answer

I bought 2 outdoor CCTV.camera RV537B with night vision. one of the unit has not functioning properly on night. i tested it by covering the photo cell that switch the LED lamp which is ok but it seems to...


I think I answer you question--when?? Take the good CCTV camera and hook it up to monitor. Then hook up the CCTV camera and turn it on. Point the working CCTV camera at the bad camera that is turn on. Now, look at the monitor which is working with your operational camera. Look at the bad camera while it on, and see how many IR LED's you can see on the bad CCTV, while it turn on. You should be able to the IR LED glowing red. If not, then there is a problem with bad CCTV IR LED's. Short wire, no power to the IR LED's. stewbison

Jun 24, 2011 | Optics

1 Answer

NEED USER MANUAL FOR LOREX 4CH MPEG 4DVR


Hi,

Check the exact model of the dvr and get your manual here

Cheers
TeaCii
If you own website, addlive support almost free
Realsecurity guard to watch your cctv for $1/day


Apr 12, 2010 | Lorex 4 Channel Home Surveillance System

1 Answer

Lorex 2.4 GHz wireless


Hi,

Do the following:
Take the camera down and bring it next to receiver. Alternatively you can bring receiver and monitor next to the camera. If you still have snot, it has nothing to do with the distance. Check if the equipment is working. Have it tested before you mount it.

Cheers


TeaCii
If you own website, add live support almost free
Real security guard to watch your cctv for $1/day

Apr 09, 2010 | Lorex Color Digital Wireless

1 Answer

I am not able to view my business from home I have Lorex


Hi,

When you are at business, you are probably accessing the network locally.

When you reach home, you are accessing it via internet.

What you need to do is to set up the router to direct the incoming requests to the dvr ip address. It is called creating a virtual server.

You may want to subscribe to a DDNS service if your ip keeps changing. Businesses normally have a static ip but not if you have a normal dsl connection.

Cheers
TeaCii
If you own website, add live support almost free
Real security guard to watch your cctv for $1/day

Apr 03, 2010 | Lorex 4 Channel Business & Home Security...

1 Answer

Inop 14" B&W CCTV monitor


You are correct. The power supply (trace) is a very high voltage device. If it goes out, you will receive no power anywhere in the unit. It will most likely be cheaper just to replace the monitor.

Dec 05, 2008 | Home Security

Not finding what you are looking for?
Lorex Weatherproof Color Day/Night Camera with 30 IR Leds CVC-6995CL Logo

Related Topics:

679 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lorex Home Security Experts

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Brad Brown

Level 3 Expert

15107 Answers

fisherman816
fisherman816

Level 2 Expert

66 Answers

Are you a Lorex Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...