Question about Computers & Internet

1 Answer

Quattro Pro X3 Refuses to print in anything by Best Quality mode

When printing from Quattro Pro, I can not set the printer to anything other than Best Quality mode. Doesn't matter where (control panel, etc) or how (fast draft, etc) I change the settings, Quattro Pro refuses to print in anything other than Best Quality mode.

Toshiba Qosmio Laptop Computer
Windows XP Media Center
Word Perfect Office X3
HP Photosmart 7150 Printer

I have uninstalled the printer driver, downloaded and reinstalled the latest driver - uninstalled and reinstalled WP Office X3 - monkeyed with the printers Advanced settings - nothing works. This has been an ongoing problem for sometime and it has gotten to the point where Corel basically ignores my requests for help.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Computers & ... Master
  • 1,633 Answers

Document contains some control characters that prevent you doing so

Posted on Mar 27, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

flopez
  • 161 Answers

SOURCE: Won't print documents from computer! PLEASE HELP! ASAP!

You cannot use an IP number for more then one device. It is an unique identification number. On the PORT section uner the Windows driver, change the last three digits for the Copystar machine, do not change the other ones (keep in mind that it should be unique!). Then go to the copier and thorugh the user panel get into network settings and enter the COMPLETE IP number just typed in Windows. It should work.

Posted on Sep 17, 2007

  • 139 Answers

SOURCE: Blank Pages Printing

Does the printer show up under "Printers and Faxes" on your PC? Click on Start / Printers and Faxes ...to see if it's there? If you see other printers in the "Printers and Faxes" window...is your 6110 listed as the Default printer...that is...is the icon for your printer marked with a small checkmark?? Is there more than one instance of your printer in the "Printers and Faxes" window? If so, you should delete all but one and make sure the remaining one is marked as the default printer.

Posted on Jan 13, 2008

SOURCE: printer won't print

I've had this 6110xi all-in-one for a few years now. Everytime I have the "no-printing" issue I need to unplug the printer, and leave it unplugged overnight. The problem magically goes away in the morning.

I've installed the printer on a separate computer while it was having a "no-printing" episode and still couldn't print there either. So it sounds like there's something funky with the printer internal cache requiring a long power-down.

Posted on Feb 08, 2008

  • 24 Answers

SOURCE: Printing takes a very long time

In this case you can bypass the spooler by the following steps:

1. Right click the printer icon & left click the printer properties

2. Click the Advenced tab in the printer properties.

3. Select the option PRINT DIRECTLY TO THE PRINTER & UNCHECK THE OPTION SPOOL THE DOCUMENT.

4. Click apply and ok.

5. Try printing.

Posted on Feb 09, 2008

MrARCADIAN
  • 284 Answers

SOURCE: Unable to print from word 2007

you are going to have to UNINSTALL all of office first and even the LOCKED version of word.

The locked version of word will not allow you to print.

Also after uninstalling office and the locked version of words, then you reboot, then reinstall office 2007 ONLY!

do not download the locked version of words.

if you want to try uninstalling the locked version of word first and see if it works, if not you gong to have to uninstall everything that has office!

Posted on Jul 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I get all collums running across the page to print this issue just started in quattro pro?


You can try printing in landscape orientation with 'fit to page' option, or print in multiple pages.

Feb 27, 2015 | Corel Quattro Pro 7 Spreadsheet & Sealed

1 Answer

Quattro pro x3 can't print


unstall the driver from control panel and install afresh.

Nov 15, 2012 | HP FACTORY RECERTIFIED COLOR LASERJET...

1 Answer

How do i get the best/profesional look from my printer


You can adjust the print mode from quick print to normal mode or best mode to achieve the print quality you prefer. Click the Properties button on any Windows print dialog. On Mac you can select Quick Print in the Print Settings pane in any expanded print dialog.

Jul 12, 2011 | Lexmark X3650 Printer

1 Answer

Hello. I am getting a message that my yellow toner cartridge is empty and the printer (Konica Minolta 2300W)refuses to print out anything, even though I got it into the B/W mode. The complete message...


It won't print anything if one cartridge is empty, even black when the colour is empty. Are you using new or refilled cartridges? The cartridge has a chip on top that counts your number of prints, so it could feel full, but has reached it's end counter. Try another cartridge. That should solve your problem

Aug 06, 2010 | Konica Minolta magicolor 5430 DL Laser...

1 Answer

It takes a looong time for the printer to print just a few lines


What print quality are you using? Go to the print window, check properties. Under the features tab check print quality. If you are using anything above normal such as Best or Maximum DPI, more memory is necessary to print and will slow down printing. If you don't need high quality printing, change the setting.

Jul 27, 2010 | HP Photosmart C3180 All-In-One InkJet...

1 Answer

I just bought a hp photosmart c3140 tri-color cartridge. after 8 small prints the ink low level lights flash-rendering my printer unusuable. i re-fill the tri-color, and reset the printer. still the...


I would be taking it back to the place of purchase and asking them to replace it. Or contacting HP directly with the problem.

You can contact HP via their home page of their website, or use the link below for troubleshooting and support:

http://welcome.hp.com/country/au/en/support.html

NOTEs:

1. Unless you are printing a final copy of an item it is a good idea to always print in Draft Quality (to save your ink). HP Printers allow you to do this. This setting is generally within the Print window, when you select Print.

2. When you are printing a final copy then switch from DRAFT to BEST quality.

Feb 10, 2010 | HP PhotoSmart C3140 All-In-One InkJet...

1 Answer

Printed pages have white lines


Adjust the properties of your print mode the default is normal change it to best. the printing speed will change but the print quality will be good.

Apr 27, 2009 | HP Officejet Pro L7580 All-In-One InkJet...

1 Answer

When printing photoshop .jpg only print quality avail. is BEST


Check settings in your Photoshop program.
then metch with Printer preferences (not properties)

Jan 30, 2009 | HP Photosmart 3310 Printer

1 Answer

Black paper


Switch to a higher print mode. Follow the steps below to switch to a higher print mode.
  1. In the program you are printing from, click File and then click Print .
  2. Make sure the printer is selected, and then click Properties .
  3. Select the Paper/Quality tab.
  4. In the Print Quality area, click the next high-quality setting. If the current setting is Draft, click Normal. If the current setting is Normal, click Best.

Jan 14, 2009 | HP OfficeJet V40 All-In-One InkJet Printer

1 Answer

Streaks though the pages


Step one: Retry the print job The problem may occur only rarely. If you have not seen it in other printouts, try again. Step two: Increase the print quality mode If reprinting did not help, try increasing the print quality mode.
  1. In the application you are printing from, click File , and then click Print .
  2. Make sure the printer is selected, and then click Properties .
  3. Select the Paper/Quality tab.
  4. In the Print Quality area, choose the next higher quality setting. If the current setting is Draft, choose Normal. If the current setting is Normal, choose Best.
Step three: Print in grayscale (black area streaking only) If the streaks are in a black area of a black and white printout, change to grayscale printing. NOTE: This step does not apply to color printouts.
  1. In the application you are printing from, click File , and then click Print .
  2. Make sure the printer is selected and click Properties .
  3. Click the Color tab, and select Print Grayscale and High Quality .
Step four: Clean the printheads If the print quality is still bad, clean the printheads.
  1. Make sure the printer is loaded with unused white paper.
  2. Open HP Solution Center .
  3. Click Settings , Print Settings , and then select Printer Toolbox .
  4. Click the Service Tab .
  5. Click Clean Printhead , and then click Clean .
Step five: Align the printheads If the print quality is still bad, align the printheads.
  1. Make sure the printer is loaded with unused white paper.
  2. Open the printer Toolbox , and select the Printer Services tab.
  3. Click Align Printheads . The Align Printheads window opens. Click Align .
  4. The printer prints an alignment page. The lines in the patterns should appear to be straight. Click OK when the page finishes printing.
Step six: Calibrate the linefeed If the print quality is still bad, calibrate the linefeed:
  1. Make sure the printer is loaded with unused white paper.
  2. Open the printer Toolbox and select the Printer Services tab.
  3. Click Calibrate Advanced Linefeed . The Advanced Linefeed Calibration window opens. Click OK .
Step seven: Replace one or both printheads If the print quality is still bad after performing all the above steps, one or both of the printheads will have to be replaced. Print a PQ Diagnostic page to see which printhead should be replaced.
  1. Make sure the printer is loaded with unused white paper.
  2. Press the Setup button.
  3. Press 1 and * simultaneously.
  4. Look at the color blocks labeled Test Pattern 2. Some or all of them could show white horizontal streaks. If none of the blocks are streaked, the printheads are okay.
    • If the Black block has lines – replace the KY printhead.
    • If the Cyan block has lines – replace the MC printhead.
    • If the Magenta block has lines – replace the MC printhead.
    • If the Red block has lines – replace the KY printhead.
    • If the Green block has lines – replace the KY printhead.

Nov 25, 2008 | HP Officejet Pro L7780 All-In-One InkJet...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...