Question about Compaq Presario R3000 Notebook

1 Answer

Presario v2000 stuck in hibernation, can't power it up

Hi. My Compaq v2000 went into hibernation mode because the battery power got low, now I can't power it up using the a-c cord. I can see that power is getting to the notebook because one of the indicator lights is flashing, but nothing happens after that. I pushed down the power button and held it for 30 seconds, nothing. Then removed the battery and tried powering it up on a-c alone. Nothing. Any suggestions?

Posted by on

  • egangreen Oct 19, 2008

    The solution suggested by the expert didn't work...take out battery, wait 5 minutes, put battery back in, hook up cord, wait 10-15 minutes, then try to power up. Any other ideas out there?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 520 Answers

Remove battery plug in power...see what happens ...nothing happens press and hold power button until you hear response(shut down)press power as usual to boot.if it doesnt work first time try a few times more remember to keep power button pressed to shut down.

Posted on Nov 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My dyson Max 08-21663b WHEN FULLY CHARGED I TURN IT ON AND IT RUNS FOR 5 SECONDS AND GOES OFF AND DOES THE SAME THING REPEATELY I BELIEVE ITS MY BATTERY PACK WHICH IS A 6 CELL CAN YOOU ADVISE ME?


Yes the battery pack would be the most likely culprit here. Go on eBay and buy the correct battery cells and build one using the old one as a guide. This method will save you about 50% over trying to buy a make up replacement if available. This is an easy job, just take your time, buy batteries with solder tabs.

Jan 11, 2017 | Computers & Internet

1 Answer

The battery is fully charged, and the ac adapter is plugged into the laptop, when i push the on button the laptop will not start


Remove the battery and power source. Remove the RAM and hdd. Power up with the power supply and it should do something. If it does, replace the RAM and hdd it should now restart. If nothing, check the GPU.

Jan 10, 2017 | Computers & Internet

1 Answer

Will not start up


hi , Reuben

I would suggest you try safe mode.
Safe mode is a troubleshooting option for Windows that starts your computer in a limited state. Only the basic files and drivers necessary to run Windows are started. The words "Safe Mode" appear in the corners of the display to identify which Windows mode you are using. If an existing problem does not reappear when you start in safe mode, you can eliminate the default settings and basic device drivers as possible causes.
If you don't know the cause of the problem, you can use the process of elimination to help you find the problem. Try starting all of the programs you commonly use, including the programs in your Startup folder, one by one, to see if a program might be the cause of the problem.
Follow the steps to boot the computer in safe mode with networking:
1. Restart your computer if it is powered on.
2. Tap the F8 key after your computer initially powers on.
3. Once you see the Advanced Boot Options menu you can stop tapping.
4. Use the up/down arrow keys to highlight your selection.
5. Select Safe Mode with Networking and press Enter.
6. You should see drivers loading, and then please wait.
7. You should then be at the Welcome Screen.
8. Logon to your computer using an account with Administrator privileges.

May 27, 2015 | Computers & Internet

1 Answer

How do i turn off the HDD


What happens when entering the sleep mode is the drives will be turned off and the present state will be kept in memory until awakened. While the system is active the power scheme will prevent the drives from idling down after so many minutes with the never turn off setting applied.

With the turn off drives after the default 20minutes of inactivity that doesn't mean all drives turn off at the exact same time. I've never come across any reference for changing the power plan option for individual drives. But I can point you at the guide for the power plan settings with one instruction on drive settings to apply prior to entering the sleep mode.



hope that helps if not let someone here know.

Oct 03, 2014 | Computers & Internet

2 Answers

How to enable bluetooth


Your computer has to have a bluetooth radio. You can check
Control Panel > System and Security > Device Manager
Do you see a Bluetooth Radio listed?

If not, you don't have BlueTooth on your computer so you will have to add a BlueTooth device by plugging one into a USB port.

If you have a BlueTooth radio, go to Control Panel > Hardware and Sound > Device and Printers > Add a Bluetooth Device

This option is used to connect a blue tooth device (e.g. bluetooth headphons) to your laptop through your bluetooth radio.

See this Windows web page for more information.
Set up Bluetooth enabled device

I will respond to any additional questions you have.

Aug 05, 2014 | Dell Inspiron Computers & Internet

2 Answers

Www.hp.com/go/techcenter/startup


My computer is appear " The System BIOS has detected that your notebook PC was not into hibernation or shutdown to avoid overheating.The system is now operating normally.
Overheating may occur if the cooling vents are blocked or the operating temperature exceeds the specification.The notebook PC should return to normal operation once the situation is resolved."
System temperature (90D)

Apr 08, 2012 | Computers & Internet

2 Answers

Freezes on the warm boot screen MC9000


This can be for a number of reasons.

First thing would be to try and cold boot the device:-

Remove battery half way, hold power button and trigger, push battery in fully until click and then release power and trigger

If that fails next thing would be to try and re-flash the operating system. This is done by using an SD card and loading the latest operating files onto it. The SD card slot is located under the keypad. A cross head screwdriver is required to remove the keypad. Search on symbol software download site for the latest. The download also has a readme with detailed instructions. Once the files are on perform a cold boot.

Remove battery half way, hold power button and trigger, push battery in fully until click and then release power and trigger. Drop the terminal in a cradle so that it runs on external power.

Hope this helps.

If you need any more help then please do not hesitate to contact us:-

http://www.biastechnology.com/

or TEL 01202 620955

Dec 09, 2009 | Symbol MC9000-G Portable Terminal

Not finding what you are looking for?
Compaq Presario R3000 Notebook Logo

462 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Abhinandan  Patil
Abhinandan Patil

Level 3 Expert

562 Answers

Are you a Compaq Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...