Question about Dell A215 Computer Speakers

12 Answers

Speakers not working, but cables all plugged in...

Well, I checked and double checked but I can't seem to find the problem. I made sure all the cables and wires were plugged in properly, including the power source and then connection to the computer. However, my Dell Dimension Desktop doesnt seem to have a jack for the speakers in the back of the tower, only in the front, next to the USB ports, which is where I plugged it in. The problem is, when I go to Control Panel > Sounds, Speech, and Audio Devices > Sounds and Audio Devices > Volume, it shows a message saying that there is "No Audio Device". What could possibly be wrong?

Posted by on

  • 71 more comments 
  • Anonymous Nov 18, 2007

    same thing

  • charlie7733 Nov 24, 2007




    ii checked every connection but still no sound?


  • Anonymous Dec 28, 2007

    Speakers not working, but cables all plugged in... problem, and notify me when a new solution is offered.

  • imsohot707 Feb 22, 2008

    I recently ordered a set of Dell speakers. However I do not see the make and/or model online. I'm not sure if it's just because dell can't seem to take a stupid picture of their product or what, but UGH. I've plugged in every cable possible in every possible jack and nothing is coming out of our speakers. I have checked all the sound control panels and such, BUT THEY DON'T WORK. GAPSDFKOMASLD,FMA.SDFMAASDL;KFMASLDKMSADKL.



    Thank you for your time,.

  • Anonymous Mar 02, 2008

    Well, I checked and double checked but I can't seem to find the problem. I made sure all the cables and wires were plugged in properly, including the power source and then connection to the computer. However, my Dell Dimension Desktop doesnt seem to have a jack for the speakers in the back of the tower, only in the front, next to the USB ports, which is where I plugged it in.
    The problem is, when I go to Control Panel > Sounds, Speech, and Audio Devices > Sounds and Audio Devices > Volume, it shows a message saying that there is "No Audio Device". What could possibly be wrong?

  • cassieeyls Mar 13, 2008

    I recently got a new Dell tower for my desktop and my old speakers are not being recongnized and no sound is coming out.

  • Anonymous Mar 15, 2008

    where do i plug in speakers on tower?

  • Anonymous Mar 19, 2008

    speakers

  • Anonymous Mar 19, 2008

    all connections are ok. i get message no audio available

  • zuker Mar 19, 2008

    get the message no audio device. all connection have been checked

  • Anonymous Mar 27, 2008

    i plug in my speakers no sound. i then go to controll pannel, over next , it tells me nothing is plugged in, what is wrong.

  • Crystal
    Crystal Mar 27, 2008

    My speakers are plugged in and the green light is on but there is not sound.. When I go into the sounds and audio device it says no audio device.. What do I need to do to get these working?

  • Anonymous Mar 28, 2008

    same prob

  • Anonymous Apr 15, 2008

    my speakers are plugged into the back of my Tower but in my audio devices it says there is no audio devices plugged in

  • Anonymous Apr 22, 2008

    Well.. we rebooted our medion computer and im sure all cables are plugged in everythings working but the computers saying the audio/speakers arnt plugged in and i really need my speakers working help?

  • Anonymous Apr 24, 2008

    Everything Is Plugged In But The Computer Aint Installing Anything For The Speakers,

    HELP?!?!

  • Anonymous Jun 03, 2008

    everything plugged in- no audio- speaker light is on I hear a sound when I turn the speaker knob-- but no sound otherwise--volume icon is on high--

  • tggrady Jul 09, 2008

    I plug in all the wires,but i only have one light green wire that plugs in the back.when power on i get no sound.

  • vballjrt Jul 09, 2008

    The computer speakers are plugged in but when i turn them on they don't have any sound.

  • Anonymous Jul 17, 2008

    they won't play anything




  • Anonymous Jul 26, 2008

    um, my speakers don't play any sounds whatsoever. I mean, they are connected and everything's plugged in. I just don't know..... How do I turn it on? Thanks.

  • kwilliams181 Jul 31, 2008

    same problem. Please notify by email.

  • mauleyblue Aug 06, 2008

    i made sure everything is pluged in but when i try to watch videoes on youtube i cant hear anything

  • gutta200 Aug 10, 2008

    My speakers are brand new and plugged up. The green light is on and i went into control panel and it said no audio devices

  • barbie teach Aug 10, 2008

    My speakers are not working. I made sure all the cables and wires were plugged in properly, including the power source and then connection to the computer, a Dell Inspiron Desktop

    it shows a message saying that there is "No Audio Output Device Installed.". What could possibly be wrong? I looked somewhere else in the computer and it said Realtek high Definition Audio is up to date, I'm no tech, need basic help..thanks!

  • Anonymous Aug 27, 2008

    My speakers are not working and everything is plugged in correctly

  • Anonymous Aug 31, 2008

    my speakers are plugged in as they are supposed to be. theyve been working fine, just today they stopped all of a sudden. my computer says there is no audio device, even though there is! this is crazy..i need help!

  • Anonymous Sep 01, 2008

    There is no sound on my computer and I miss it. All connections appear to be correct.

  • holmesc Sep 02, 2008

    I have an ACER PC and have made sure my speakers are plugged in correctly. i have checked the little icons on the bottom left of my screen which inform me that all speakers are in working order. i have also checked my control panel which can not detect a problem. the lord said let there be sound but not yet there aint!

  • Anonymous Sep 10, 2008

    just had dell computer restored, everything is hooked up right, but no sound from speakers.

  • Anonymous Sep 19, 2008

    my speakers are plugged in, and everything in the control panel indicates that they are detected and work... but they don't

  • Conisha Oct 09, 2008

    all the cords are plugged in like they should be and the green light is on but when i go to listen to something i can't hear it. When i click on control panel and click on speech is says the audio device isn't installed.

  • Anonymous Oct 15, 2008

    the speakers are plugged in and all the power lights come on but i cant hear anything.

  • Anonymous Oct 18, 2008

    my speakers are pluged in and still no sound audio not reconised

  • Anonymous Oct 28, 2008

    speakers are plugged in sand have the light saying they are on is on and still no sound

  • Anonymous Nov 01, 2008

    dell a215 speakers

  • vesprey Nov 01, 2008

    dell a215

  • kamwheat Nov 05, 2008

    i have the exact same problem with the same speakers... my teacher told me that she had the same problem happen with her computer and all she had to do was download a new sound driver...

  • Anonymous Nov 15, 2008

    No Sound

  • ginapooh35 Nov 16, 2008

    I have this same problem and can't get any help or find the driver anywhere!!! can anyone help me please!!!!!!!!!



    gina

  • patriotsfan7 Nov 16, 2008

    it tells me there are no active mixers?

  • jcollins010 Nov 23, 2008

    i have the same problem!!!!

  • Anonymous Dec 05, 2008

    Well, I checked and double checked but I can't seem to find the
    problem. I made sure all the cables and wires were plugged in properly,
    including the power source and then connection to the computer.
    However, my Dell Dimension Desktop doesnt seem to have a jack for the
    speakers in the back of the tower, only in the front, next to the USB
    ports, which is where I plugged it in.
    The problem is, when I go to
    Control Panel > Sounds, Speech, and Audio Devices > Sounds and
    Audio Devices > Volume, it shows a message saying that there is "No
    Audio Device". What could possibly be wrong?

  • sandruh Dec 05, 2008

    i have the same exact problem .. help :(

  • jeffrrey8000 Dec 07, 2008

    well i know for a fact that the the speakers work and they are pluged in correctly bu i do not hear anything when i turn them on and my computer tells me i do not have a sound device bu the speakers are pluged on

  • Anonymous Dec 14, 2008

    i have the same problem no sound at all..

  • j_smith07 Dec 16, 2008

    all the videos on you tube no sound but everything is hook up wires and cables jacks modem all plug in right PLEASE HELP need to here my old school music it makes my day!

  • Anonymous Dec 16, 2008

    My speakers are plugged in to the correct slot, and i have double checked to make sure that everything is in the right place. But when i go to Control Panel>Sounds, Speech and Audio devices>Sounds and Audio devices, it says taht there is no audio device. How can i fix this?

  • Anonymous Dec 16, 2008

    Same exact problem. It doesn't even detect that my speakers are there.

  • Anonymous Dec 28, 2008

    Same exact problem!!!

  • Anonymous Jan 02, 2009

    same problem they were working before though

  • jonathon628 Jan 05, 2009

    SAME EXACT THING! perfect match!

  • commishlover Jan 13, 2009

    I have plugged in the speaker cable, which is in the back, and nothing comes out . It is driving me crazy. Can someone please help me?

  • jgrg300m Jan 24, 2009

    I need "Dummies for Computers" when doing anything on my computer except email. About a week ago my speakers stopped working for some reason. I did nothing I am aware of. They have not been unplugged. They have worked fine for over 2 years. They are Dell speakers connected to Dell computer Dimension 4700. Help!!

  • Anonymous Jan 30, 2009

    Well, I checked and double checked but I can't seem to find the problem. I made sure all the cables and wires were plugged in properly, including the power source and then connection to the computer. However, my Dell Dimension Desktop doesnt seem to have a jack for the speakers in the back of the tower, only in the front, next to the USB ports, which is where I plugged it in.
    The problem is, when I go to Control Panel > Sounds, Speech, and Audio Devices > Sounds and Audio Devices > Volume, it shows a message saying that there is "No Audio Device". What could possibly be wrong?

  • Anonymous Feb 06, 2009

    speakers are plugged in but no audio

  • kbeckley19 Feb 08, 2009

    i plugged the speakers up and checked tem twice and went into the control panel and they are not finding the speakers it is saying no audio device found what should i do?

  • Anonymous Feb 11, 2009

    Hello,



    I have all of my cables plugged in but i still have no volume. Can you please help?

  • phat0103 Feb 11, 2009

    hello,



    i have no volume on my speakers at all. they arec cables are all connected but no volume. What do i need to do?



    Thanks

  • shackmann Feb 21, 2009

    My speakers dont work! When I go to the control panel then to sound, speech and audio devices, then to sound and audio devices it states there is no audio device. How can I fix this please?

  • Jeniffer Parks
    Jeniffer Parks Mar 13, 2009

    i had to reinstall all programs but now my speaker is not working, mine is a desktop window vista home basics.

  • Miechelle Mar 22, 2009

    My computer says that there are no audio devices hooked up but all the cables are plugged in correctly. What do i do?

  • CHAYCH Mar 27, 2009

    THE SPEAKERS ARE PLUGGED IN AND WHEN I TEST THE SOUND IT WORKS BUT WHEN I GO TO A SITE ON THE COMPUTER THE SOUND DOES NOT WORK


  • podgeyb333 Apr 09, 2009

    my speakers are powered on but there is no sound and when i go to volume control to turn on the volume a message comes up saying there is no audio mixer device what can i do to get my sound back???

  • princessiman Apr 13, 2009

    I checked and double checked but I can't seem to find the
    problem. I made sure all the cables and wires were plugged in properly,
    including the power source and then connection to the computer.
    I checked for the sound.
    The problem is, when I go to
    Control Panel > Sounds, Speech, and Audio Devices > Sounds and
    Audio Devices > Volume, it shows a message saying that there is "No
    Audio Device". What could possibly be wrong?

  • Anonymous Apr 17, 2009

    I have a dell inspiron 530S desktop with windows vista home basic built in...anyway i updated all of my sound and audio drivers ..it says everything's working but i am getting no sound from my speakers..although i do hear static come from them when i put them in a port..any help would be welcome

  • bonusjonasfr Apr 17, 2009

    Well, I checked and double checked but I can't seem to find the
    problem. I made sure all the cables and wires were plugged in properly,
    including the power source and then connection to the computer.
    However, my Dell Dimension Desktop doesnt seem to have a jack for the
    speakers in the back of the tower, only in the front, next to the USB
    ports, which is where I plugged it in.
    The problem is, when I go to
    Control Panel > Sounds, Speech, and Audio Devices > Sounds and
    Audio Devices > Volume, it shows a message saying that there is "No
    Audio Device". What could possibly be wrong?

  • Anonymous Apr 19, 2009

    speakers not working - in control panel, sounds it says no audio installed

  • Anonymous Apr 20, 2009

    well i have the exact same speakers as most of you and i keep trying to fix them but nothing i try works...im going on the dell site now so ill tell you if i fix it =)

  • Anonymous May 05, 2009

    my computer says no audio device

  • acathy20
    acathy20 Jul 21, 2012

    SPEAKERS DONT WORK ON MY COMPUTER BUT WORKS ON OTHER COMPUTER

  • Jack Courtney Jul 14, 2013

    Same here. Wha is going on????

  • Anonymous Mar 27, 2014

    the speaker projects a signal sound when the cables are first attached. However there is no audio from the movie. checked the volume and the cables are color coordinated and in the correct ports.

×

Ad

12 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 29 Answers

No drivers for your soundcard, this is a computer issue not a speaker issue, contact dell, if you can understand a word they say, ask them "I have Dimension (model number here), I need to know how to install my sound drivers", if you dont know how to do this.

Posted on Aug 12, 2006

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 121 Answers

In answer to snowbunny's question, goto: start -> control panel -> sound and audio devices when the little box pops up, make sure that you have the box checked off that says "place volume icon in the taskbar" and you should be fine. As for glo92's problem: goto "sound and audio devices" like above, and make sure that within the "Audio" and "Voice" tabs that the voice/sound playback are not greyed out and have some kind of card assigned to it. If it's greyed out then you need to install new drivers and properly assign them to the playback devices.

Posted on Apr 06, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I cna't hear any sound from the speaker

Posted on Oct 29, 2012

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My system worked fine for a long time, then suddenly didn't any more. I went to Control Panel, clicked on Sounds and Audio Devices, then clicked on the Audio tab -- found there that the default devices were set to "Modem #0 Line ..." -- changed this to the other option: "Realtek HD Audio..." for both Sound playback and Sound recording. Then, went to the Voice tab and did the same thing. It works fine now!

Posted on Feb 13, 2010

  • Level 1:

    An expert who has achieved level 1.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

When I first got my Dell Inspiron 530 I connected everything up and plugged my sound plug into various sockets on the back of the tower untill I found one that worked.

But I had problems: restore refused to work.

So I reinstalled Vista choosing the "mirror" option. Everything was okay except I had no sound.

I looked in the Dell Owner's manual and saw that I had the speakers plugged into the microphone socket. Yes I got sound from the microphone socket!

Furthermore, when I right clicked on Realtek HD Audio manager and left clicked "audio devices" it said "Realtek HIgh Definition speakers not plugged in".

Looking in the Dell Owner's manual I saw that speakers should be plugged into socket 6, front L/R line-out connector.

I plugged the speakers into this socket and guess what - I got sound!

Yours,
Ty

Note: I am using old Acer speakers, not Dell Realtek HD speakers.

Posted on Dec 31, 2008

  • Irving485 Sep 04, 2011

    My hat off to this answer it solved the mystery of no sound..I got info from geeksquad they said it was probably my drivers. Thxs to the writer an ask.com!

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Dell would not help me over the phone - and I tried live chat - they said I bought it at Best Buy, take it back to the store. Best Buy they tested it our with their speakers - couldn't get sound either. They said it was a problem with the hard drive, replaced it, and now I have sound. So my only solution was to tak eit back where I bought it,

Posted on Sep 28, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Hey, Ive got all my plugs in but when i go through control panel and click on the audio tab in sounds it says that i dont have any devices connected. Can you please help.... I gone through control panel so many times and device manager and i still have no sound.

Posted on Jun 11, 2009

  • ASHY-TEE Jun 11, 2009

    What drivers do i need to install. When i go into sound through control panel its all greyed out but i dont know what drivers i need to install in order to get my sound working again.

  • delano_97 Nov 06, 2010

    did u figure out wat wuz rong???

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Good Morning,

I will be most delightful if you can fix the problem for us.

Community

Posted on Sep 28, 2008

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Omg u idots i get the same problem as ashy-tee

Posted on Dec 27, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My speaker is not working and then worked for 2 seconds and it stopes again. its keep reapeating like that. i dont know what the problem is. i went to the computer store and they say theres nothig wrong with it but there is! is it my computer that has problem?

Posted on Apr 04, 2010

  • Level 1:

    An expert who has achieved level 1.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 2 Answers

I've been trying to troubleshoot my non-working speakers for DAYS! Tried to turn on my desk lamp, not working. Wasn't plugged in all the way........now my speakers are working again. Who knew they could be related somehow............duh! CHECK EVERYTHING!

Posted on Sep 11, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My speakers wont work

Posted on Nov 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Im trying to hook my insignia flat screan tv to my mitsubishi M-VR900 recevier the tv has plug for audio out and recevier has a tv audio in red/whit plug and i have 2 speakers i have on the front spearker...


Go into the onscreen menu of your TV, find and select the audio options. Make sure the audio out on the TV is enabled (this might be an automatic feature and might not be displayed -it depends on your TV model). Next make sure your receiver is working and (if it is so equipped) make sure your speaker switch is enabled.
Make sure all of your cables are working. You can do this by switching out the cables one at a time for ones you know are good.
Make sure no headphones are plugged into your receiver or the TV -this usually turns off your audio signal to any speakers.
Your TV remote may be equipped to control the volume output of the external audio out signal. Some TVs automatically turn off the internal speakers when you hookup or select an external audio output. turn up the volume on both (your TV and the Mitsubishi).
Does the Mitsubishi work on other sources (DVD, radio etc...)?
Remember to double check your cable connections -audio OUT from the TV to audio IN into the Mitsubishi. Reversed connections can damage your TV and amplifier electronics.
What model is your Insignia? Some are equipped with digital outputs which, if your receiver is so equipped as well, can send surround sound (home theatre) signals to your receiver. These can be orange-colored rca jacks or optical jacks. They do not send analog audio signals.
Once all the cables are double-checked, (double-check your speaker connections!), turn on your receiver, TV and signal source (cable, satellite DVD etc...), bring the volume control (both on the Mitsubishi and the TV) up to nominal levels. You should hear sound.
One more thing:
Make sure your speakers work. You can try them on another amp or simply touch the speaker terminals with a 9-volt battery (the speakers should move in or out depending on the 'phase' of the connection).
Hope that helps.

Nov 26, 2011 | Audio Players & Recorders

1 Answer

I have the Boston Acoustics BA745 Computer Speaker System. I cannot get the Sub-Wolfer to work. Everything is plugged in but when I turn the volume up on the left speaker module, nothing happens. Is there...


This could be because the speakers arn't getting a stereo signal, but first, double double TRIPLE check the wires are connected correctly. Iknow it sounds patronising but I don,t know if you are 8 or 80 years old and it's often best to go for the most obvious solution. afer making sure all connections are correct, have a look at the cable to the subwoofer - is there any damage to the cable or does the cable look like it may have been pulled - out from the sub or it's connection at the other end of the cable? Having eliminated the possibility of cable damage (it may be worth cheacking the cable to the pc) check various settings on your pc - are you getting sound from your other two speakers? if you are only getting sound from one of the left/right speakers and you're sure there's no physical failure with the speakers, then it's time to check your software. go to the little speaker ikon at the bottom right corner and right click. Select "Playback devices" select "speakers" and click "test" did you hear sound coming from the left speaker then the right? if yes then you definately have a problem with the sub. if no, click "properties" then "levels" and check the balance is set to the middle. If it is, then you should, again, suspect the speakers. Finally check the balance on your media player, if you use windows media player, go to "options" click "enhancements" then look for the balance control and make sure it's in the middle.
Finally, I would like to point-out that this particular speaker system is not known for having a loud subwoofer, put your ear against the hole in it and double check for anything happning inside (a crackling noise would indicate a danaged voice-coil.

Hope this helps.

Jan 08, 2011 | Boston Acoustics BA745 Computer Speakers

1 Answer

The sound is to low it seems that the speaker


check your Sound audio option in Control Panel....
check your audio jacks and cables for any cable faults...
check the volume control

Dec 10, 2009 | Philips SBP1100/37 Portable Speaker System...

1 Answer

I have a syncmater 2333 HD and after connecting to my pc, i seemed to have lost all sound. when connecting speakers and earphones, there is still no sound. thanks


Did you plug in the audio cable to the back of the computer? If so, this may have disabled the front audio connections (or vise-versa). Try unplugging the audio cable from the computer (that is connected to the monitor) and see if your headphones work. If so, there is the solution to that problem.

Check the audio connection on the back of the monitor and double check that it is plugged into the correct port on the back of the computer. If the monitor has amplified speakers, it would be a good idea to connect to the 'line-out' connector on your computer. This would avoid disabling your front audio panel.

Lastly, check the volume on your monitor's built in speakers. This monitor can double as an LCD television, so it most likely has a separate volume control (that defaults to 0).

Oct 04, 2009 | Samsung SyncMaster 2233BW 22" LCD Monitor

1 Answer

Audio


do check cables and plugs, seems one channel is out due to a broken one.
try to double/check with another pair of speakers or earphones, to make sure ti is not the card or amplifier.
if u still have the problem, do come back!

Aug 07, 2009 | Televison & Video

2 Answers

Bose Companion 3 Series II not working (Mac)


The speakers seem to be muted by default - you'll see that the LED is yellow/amber. Tap the control pod - the LED will turn green and speakers will work. I felt like such an idiot after I spent almost an hour trying to figure this out. (This feature should be more prominent in the manual.)

Dec 20, 2008 | Bose Companion III Computer Speakers

1 Answer

Speakers not working, but cables all plugged in...


You will pobably need to load the driver for your system.

Go to Dell Support and click on the Drivers & Downloads box.

Follow the prompts to select your specific system model. you will end up at a page that lists all the available drivers for your computer. Click the + sign next to "Audio" and you can select "Download Now".

When the download window opens, select "Install".

Dec 14, 2008 | Microsoft Windows XP Professional for PC

1 Answer

Speakers not working, but cables all plugged in...


the problem is your computer may not sense the presence of your audio device, chances are your driver is either corrupted nor not yet installed.
go to my computer then right click go to properties, hardware, device manager, 
under the device manager go to sounds and see if ther is any exclamation icon or anything , expand this icon and see if there is anything you see that has a yellow exclamation or question mark right click that icon and select scan for hardware changes , then update driver , better yet go to sound properties and see if you can roll back the driver, if you have the cd utilities for your computer, you can reinstall the driver again and after all this restart once again your computer
cheers 

Nov 08, 2008 | Logitech X-530 Computer Speakers

2 Answers

Speakers not working, but cables all plugged in...


You might have to reinstall the software that came with the speakers since you had to wipe your computer clean when the virus was on there. The speakers will not work until the software is installed back on your computer.

Oct 21, 2008 | Logitech S200 Computer Speakers

1 Answer

I have a set of Durabrand UC280 speakers. Pluged them into my cumputer. No sound. The speakers seem to work OK. Have checked systems and all say are working correctly. Any suggestions????


Are you sure you are plugged into the speaker output on your computer? Of not try the other outputs, and also make sure the volume is turned up and not muted on your computer, check by double clicking on the speaker icon in the lower right hand corner of your screen or by going to the sound applet in Control Panel.

Have you tried these speakers on another computer or with a CD player or MP3 player? If they don't work with another device either than you know there is a problem with your speakers.

Also make sure that the speakers are plugged into a power source if they require it, most likely they do.

Jul 02, 2008 | Computers & Internet

Not finding what you are looking for?
Dell A215 Computer Speakers Logo

46,916 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Audio Players & Recorders Experts

jairo sanchez

Level 2 Expert

276 Answers

Jax Planet
Jax Planet

Level 2 Expert

922 Answers

Are you a Dell Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...