Question about Samsung HC-P4741W 47" Rear Projection HDTV-Ready Television

1 Answer

Colours all messed up and reds dull look brown

Within last few days I've noticed my colours are out of whack Red sports jerseys look dull brown almost grey even when i changed colour menu to 100% red Blues, yellow seem fine but everything really looks blad even HD channels. Even when I put back to standard colour format all still looks blah

Posted by on

  • CAK503 Mar 20, 2008

    I HAVE A SAMSUNG PCK6115R 61" REAR PROJECTION TV. THE BLUE BULB IS NOT WORKING PROPERLY. I PUT A PIECE OF PAPER OVER THE BLUE&GREEN BULB, I GET A RED PICTURE, I PUT IT OVER THE BLUE & RED BULB, I GET A GREEN PICTURE, I PUT IT OVER THE RED & GREEN BULB, AND I GET A FAINT BLUE HAZE, NO PICTURE???

    I HOPE THAT MAKES SENCE HELP!!

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers

You should first turn off all the color on the set, or play a b&w Tape or dvd. What were looking for here is, what the color balance or grey scale looks like first. If a B&w video or whatever looks true to grey and black and white then you have whats called croma problem in the color or video demodulator. My friend I wish there was an easy way to assist you in this type of repair but theres not, as it could be a problem in the video/croma demod section of the video jungle IC and this is not a user serviceable part or repair as thers several issues concerning Hi voltage as well as x ray radiation. Now if its a problem where the grey scale or the B&W is not true to color then theres a problem in the R G B driver circuits. Could be a simple drive adjustment or even a soft or weak picture tube. I hope if your not a tech you seek a pro to assist you in this troubleshooting as this could be dangerous for you as there are no user serviceable parts inside this set. Good Luck

Posted on Jun 21, 2006

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wiring a d2 eberspacher diesel night heater up


how much it coast black & decker Heater product model no . or07d
thank you

Dec 22, 2013 | Heating & Cooling

1 Answer

I coloured my hair last Thursday with John Frieda precision foam colour. I used medium red brown.....don't have the package anymore. My natural hair colour is medium brown. The result is too dark. Can...


Hi no you wont be able to put another colour on top, you will have to wait till it fades. If you put another colour on top you will get colour build up!

Jun 11, 2011 | Health & Beauty

1 Answer

I have a 2002 Suzuki Swift 1.3 and I need the colour coding for the car stereo. This is how it looks like looking from the back of the connector. The top colour is the main colour and the bottom is the...


why post non usa cars to USA forum>????
hint, we dont have M13 here. (EPA ******* here)
then not telliny your county.
why"?
my guess is you think all cars same, all suzuki same world wide and all suzuki have 1 radio.
sorry that don't fly.
but most posts here are just like this, hopeless.


wild guess 1:
here is our last swift, sold USA.,(not a m13 for sure)
wires
MAin set; and speakers last.
wht/blk, = ign. on. power 12v
white = memory , hot all time to battery via fuse, station memory
black = ground
red-green = illumination
red-yell = park lamps on, lighting,.
and below is speaker.

this is year 2000 last car sold here,

speakers-f2pntdp44mjusq0choqk2alv-3-0.jpg

Mar 13, 2017 | 2001 Suzuki Swift

1 Answer

Hi there want to fit digi gear indicator to ducati 748s its an 2003 model last one made need to know colours of wiring to gearbox & what they relate to.Thank you.


Motorcycle DiGi Cable Colour Ground – Choose a ground wire within the harness Black Ignition switched 12 volt positive supply Red Tachometer pulse (rpm) Yellow Speedometer pulse (mph/kph) Green Neutral Light Brown Learn/set-up Orange

Oct 02, 2009 | 2002 Ducati 748 S

1 Answer

Trying to fit G202 electronic ignition to G11 Charade. The G202 coil has blue/brown wire and black/blue. G202 distributor has black/brown wire and black. Can you tell me where these wires should go?


The colour coded wires seem to differ at randomn. To identify the cables:

Dizzy:- use a multimeter set on ohms.. When you measure about 3 meg ohms, your red probe is on the +ve wire and the black probe is the signal to the coil.

For the coil, it hard to measure the primary resistance so the general convemtion is looking at the pins on the coil with the taper at the top, the +ve is on the right and the signal (coil -ve) is on the left. Sometimes you'll notice one of the wires on the coil is a thicker gauge, which is generally the +ve.

Jul 30, 2008 | 1990 Daihatsu Charade

1 Answer

Dull red on a Xerox Phaser 8400


That normally is a print head issue and replacing the print head is the only resolution I have had that resolves that problem. Sometimes the red will be almost maroon, other times it will be orange.
But is should normally be a pure red.

Jun 20, 2008 | Xerox Phaser 8200 Laser Printer

1 Answer

Toshiba projection tv


there is no pink in resister codes
red or orange i think it's orange
32 X 8 or 5 32000 32K? most are low resistance
3.9 ohms and below.

Dec 06, 2007 | Toshiba 43HX70 43" Rear Projection...

1 Answer

Red colour prints brown


Just replace the non genuine inks with proper Canon ones and then do about 4 full cleans, that should fix it. If not you will have to replace the printhead, which is usually caused by using non genuine ink. Good luck

May 27, 2007 | Canon PIXMA iP4200 InkJet Photo Printer

Not finding what you are looking for?
Samsung HC-P4741W 47" Rear Projection HDTV-Ready Television Logo

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75311 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...