Question about Siemens WXLP1460 Front Load

2 Answers

Siemens XLP 1400 stops with F12

Hi

I have a Siemens XLP 1400 front loader,which is now halting with an F12 error.

What is causing this and is this fixable myself or does it require a qualified engineer?

thanks

chris

Posted by on

  • ailsaweather Nov 12, 2008

    hi



    I have a Siemens XLP 1400 front loader,which is now halting with an F12 error.



    What is causing this and is this fixable myself or does it require a qualified engineer?



    thanks

  • Anonymous Nov 27, 2008

    I have the same problem!!

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The manual says that it means there's water in the base pan because the apliance is leaking and you should callCustomer Service.

I cleaned the filter and then put the machine onto its Empty cycle. After that it worked.

Posted on Jan 23, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a siemens front loader it keeps stopping the cycle and flashes up with F 18 any ideas

Thanks

Posted on Aug 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have smelly brown deposits coming back into the wash and staining the wash


If your drain hose is draining under the sink its probably coming from there.Pull the hose through as much as you can
and tie it up as high as it will go at the sink waste.this will stop
any waste from your sink flowing down the washing machine drain hose.

Mar 07, 2015 | Siemens Washing Machines

1 Answer

Seimens xlp 1400 - how do I pause the wash?


Hi from retired Englishman in SW France,

You need a manual ;-0)
You will need to type into your search engine/web browser '(make) washer manual' and you should be presented with a number of sources from which you can either download for free or have to pay a nominal amount. During the process you will be asked for the actual model number!
Good luck,
John C
.

Mar 13, 2011 | Siemens WXL142 Front Load Washer

1 Answer

Hi,I live in korea . AEG,LAVAMAT 72760,When wasing , the washin masine properly operate at the fist. but, the wasing masine stop as soon as Rinse. simutaneously,C3 appear . what is problem and...


Hi- I am retired Englishman living in France!

I would suspect the lint tray/filter- it could be blocked. So many problems are caused by this- machines stop, some show error message, some do not!

I'm sorry but I do not know your particular machine- whether it is front or top loader. For front loaders it is found behind the front lower panel- the filter could be in a similar place for top loaders.
I would check and clean it anyway - and regularly.

Hope this is the cause,

Cheers,

John C

Feb 09, 2011 | AEG Washing Machines

1 Answer

ERROR CODE CL for a Westinghouse front loader Model 708


Hi, cl means that the machine is over loaded, push stop clear to clear then try again with a lighter load....

Take care

Jun 15, 2010 | Siemens WE61021GB Front Load Washer

2 Answers

How do I run a Fujitsu PC headless?


while booting press F2 to enter to bios setup.
in the main tab go to Boot Features.
the first point in Boot Features is POET Errors will be "Halt On All Errors" then you have to change it to "No halt On Any Errors"

May 13, 2010 | Fujitsu Siemens ESPRIMO P2500 PC Desktop

1 Answer

My XLP 1400 siemens beeper has gone quiet all of a sudden?


Have you tryed unpluging for 10 seconds and plug back in. Sometimes this works. Let me know.

Apr 06, 2009 | Siemens Washing Machines

1 Answer

I have a key symbol on my digital display on my siemens xlp 1400


Set the dial to any setting. Press start button for 5 seconds or more. Viola! Locked symbol will go off.

Dec 08, 2008 | Washing Machines

3 Answers

F12 Error


what is F12 error code on a siemans wxlp1400 and how do i cure the fault, cheers

Dec 29, 2007 | Siemens WXLP1460 Front Load

Not finding what you are looking for?
Siemens WXLP1460 Front Load Logo

3,466 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

71043 Answers

shaun taylor

Level 3 Expert

1493 Answers

Are you a Siemens Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...