Question about Philips 9P5034C 50" Rear Projection Television

1 Answer

Picture blur display

Blur picture when first switch on the power after 2 to 3 hours the picture slowly become clear..tnx alot God bless you.

Posted by on

  • dongix Nov 03, 2008

    what do you mean by CRT fluid... pls reply!

  • szulbeari Nov 18, 2008

    I have a the same problem but my picture goes in and out.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Philips Master
  • 3,459 Answers



If the picture shrinks and expands you can get a repair kit from www.tvrepairkits.com. 

If the screen is just foggy looking my guess is the CRT fluid needs to be replaced. 

Posted on Nov 03, 2008

  • Edward
    Edward Jan 11, 2009






    If you have any of the following problems you may want to check the site www.TvRepairKits.com for a repair kit. Most of the issue below are fairly common with the older Magnavox projection sets. 
    Symptom: Screen shrinks and expands - may or may not correct itself after the TV warms up. After a few days, weeks, or months of having the shrinking/expanding problem you may loose all audio/video but the power light will remain lit!

    Symptom: No Audio or Video but power light is on

    Symptom: Audio works but no Video. Power light still work

    Symptom: No Video. Audio is intermittent. Power light still works

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My samsung led tv is getting dark


With a DLP TV, getting a darker picture means it is time to change the bulb.

Feb 16, 2015 | Samsung Projection Televisions

1 Answer

PT-43A80T


try to go MENU, and restore to factory default and try it again.
If the problem persist, you must test the power supply, in order to see if the +5Vdc- 5 vdc+12vdc etc are there,
God bless you

Jul 15, 2013 | Projection Televisions

1 Answer

We lost picture (no picture) through cable portal. Tv has blurred picture using HD wire connection via HD1 & HD2 Portals. As tv warms up picture slowly clears. The problem has progressively gotten...


hyperunit failure. that tv uses whats called a " next hyper-unit" it is the digital scan card for the tv. it does the video and audio processing for the tv. they can be very heat sensitive and get better ot worse over time. the repair is very involved i suggest calling a repairman.

Dec 22, 2010 | Toshiba 57H82 57" Rear Projection...

1 Answer

I have a sony 55'' lcd projection tv. When I push the power button no picture comes on & the power button blinks green 2 times then blinks red 2 times & back & forth.


If your tv is around 2-4 yrs or used 6000-8000 hrs,never replaced the lamp before it could be time to replace it.The other most common failure is the board that powers the lamp,which is called the ballast.When its bad it will make a clicking sound or like wanting to turn on.Good luck and God bless your house!

Feb 10, 2010 | Projection Televisions

1 Answer

Sony wega no picture and no sound


Hi,If your tv is between 2-4 yrs and havent replaced the lamp it might be time to replace it.If you hear clicking it could be the board that powers the lamp.You can find the lamp here: www.discount-merchant.com?Click=48173 Good luck and God bless you!

Nov 06, 2009 | Projection Televisions

1 Answer

The tv clicks on but no picture or sound


Hi if your tv is a DLP or LCD RPTV most likely it's a ballast issue which is the board that powers the lamp.It could also be your lamp if tv is between 2-4 yrs.God bless you!

Oct 07, 2009 | Panasonic PT-50LC13 50" Rear Projection...

1 Answer

Borders bowed inward,blurred red,blue, & green


the next time it is not working go into the customer menu with remote and call up the convergence grid and look---there---if convergence is way off and or comes and goes---this set uses 2 Stk-392-570 ic's and it is quite common to see them become intermittant.

Aug 03, 2009 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

Picture turns to red & green and becomes blurred.


This is likely solder connections cracking on your convergence ICs. If you can bump the tv and it goes back to normal, it just needs resoldering, but if it doesn't, then it needs the ICs replaced. If the convergence is out, you will see a bowed picture and the red, green, and blue will be separated. Worth repairing if you can find a company to do it affordably, I can help you repair yourself if you have disassembly and soldering skills.

Dec 03, 2008 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

Sony 61" Projection (KP-61HS10)


Your TV requires Geomatirc Adjustments in proper manner by qualified servcie person.

Jul 19, 2008 | Sony KP-57WV600 57" Rear Projection...

1 Answer

Blurred figures and no color convergence when hitting the flash button to clear up picture


convergence ICs have failed. Heres a link where you can get replacements with free step by step instructions so you can do the repair yourself and save alot of money. The parts are inexspensive.
http://servicemanuals.vstore.ca/

Apr 05, 2008 | Sony KP-51HW40 51" Rear Projection...

Not finding what you are looking for?
Philips 9P5034C 50" Rear Projection Television Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68223 Answers

Are you a Philips Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...