Question about Panasonic Projection Televisions

2 Answers

Panasonic Stereo Colour TV Model TX - 76PW10A Has frequent intermittent problem of no sound. Typically takes multiple tries to get sound working. Sometimes nothing comes on. Sometimes sound will come on after say 20 minutes Once the sound went off while watching it

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 558 Answers

SPEAKER REPAIR SERVICE

You need to do:  Full inspection/test of cone, spider, basket, voice coil, crossover and lead wires. 
Let me know for further assistance.
Regards, Ellin

Posted on Oct 19, 2008

  • Puneet Jain
    Puneet Jain Oct 19, 2008

    Since when this problem start. Also check out for switches and controls (if you have required tools) otherwise contact nearest Repair Shop.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 84 Answers

I think there are no problem with your tv sum wire is missing it place 
did u put headphone to TV sumtime if u plug a headphone in tv headphone jack again u short out your problem 

Posted on Oct 19, 2008

  • 1 more comment 
  • rush2aaman
    rush2aaman Oct 19, 2008

    u again put a headphone in TV headphone jack 


  • rush2aaman
    rush2aaman Oct 19, 2008



    and put it out after pluging in

  • rush2aaman
    rush2aaman Oct 19, 2008

    other wise your TV having problem with thes IC's D2432, D2436, IC2402, R2419, Z1


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Toshiba 62hm195 DLP HDTV's HDMI ports have been losing sound intermittently. Both HDMI ports while connected to multiple devices (HDTV cable box, Panasonic Streaming Player) lose sound intermittently...


Your problem is in the streaming player. It is not keeping up and when an HDMI loses connection it will not auto find it again. To verify this take the Panasonic out of the loop and see if this fixes it. I love HDMI but it is touchy

Feb 18, 2015 | Toshiba 62HM195 62 in. HDTV DLP TV

1 Answer

Convergence is OK for a few minutes


it sounds like you might have intermittantly bad convergence ic's and/or bad solder connections on the STK ic's but if you resolder them and the same thing has the same issue I can tell you at this point is to go to tvrepairkits.com and order the completeconvergence kit for your model of TV set,

no need to search and order multiple parts from different sources and pay multiple shipping fees! Go to http://www.tvrepairkits.com/xcart/home.php?partner=larry
The kit comes with original Sanyo STK IC'S , not those cheap aftermarket or china made IC'S full pictorial directions, the thermal paste, resistors, the correct Pico fuses, AND free live on-Line tech assistance in case you run into a problem with the repair. They ship out 2 to 3 day Priority mail, the next day in most cases GOOD LUCK!!!
Larry Dillon.click here please if you wish to repair it yourself and save close to 400.00 bucks
http://www.fixya.com/support/r3342653-convergence_fix

May 14, 2010 | Panasonic PT-53TW53 53" Rear Projection...

1 Answer

TV MODEL 32PF9631D 2 YEARS OLD INTERMITTENT FAULT BECOMING MORE FREQUENT - PICTURE DROPS OUT LEAVING BLANK BLACK SCREEN (ALL CHANNELS INCLUDING FOXTEL) BUT SOUND REMAINS. TURNING TV ON AND OFF WILL...


You have problem with the power inverter, in you tv it might be part of the power supply, in which case you will need just one board. Julio milleniumtvsvc@gmail.com

Jul 23, 2009 | Projection Televisions

2 Answers

Colour convergence on a projection TV


hello it sound like convergance chips may be the problem

shaun

May 11, 2009 | Philips 43P8341 43" Rear Projection...

1 Answer

When i switch on my digital Panasonic TV (Model TX-32LMD70)using the remote control from standby (red light showing) the green (on light) flashes and then nothing happens i.e. the television does not...


Is your TV still under warranty? This problem seems common on this site with the Panasonic brand. I really can't say what exactly is causing this problem, but it seems like something in the power circuit board is faulty. My advice would be to call Panasonic's Technical Support Hotline and speak to a Technician. It could even be a problem that has warranted a recall of that particular model. The number for Panasonic's Hotline is 1-800-211-7262. Or, you can contact them via e-mail @ www.panasonic.com under "Get Support". Hope this helps...

Sep 08, 2008 | Panasonic Projection Televisions

1 Answer

HOW TO FIX CONVERGENCE IC FAULT & HOW MUCH COST APPROX


Panasonic Flashing codes:
1: ----------------- +140 v.
2: ----------------- Low DC
3: ----------------- Convergence
4: ----------------- HHS
5: ----------------- IC 4011
6: ----------------- IC 4018
3 is convergence, either one of the two convergence ICs faulty, or something else (capacitor etc.) has blown on convergence board.

Jul 13, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Are you a Panasonic Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...