Question about Vizio L30WGU 30 in. HD-Ready LCD Television

2 Answers

How do I get sound on my Vizio SV420XVT 42 Great picture but no sound

I just purchased a Vizio SV420XVT and we have worked for hours but cannot get the sound to work.

Posted by on

  • 1 more comment 
  • Rivals Dec 13, 2008

    I have the same problem from the same model. There is no sound at all, not even from the internal speakers. I've hooked up surround sound and that gets nothing either. Just got the TV 3 days ago. I tried to watch a blu-ray movie and the picture comes up fine but there is no sound! Very frustrating. Anyone have suggestions?

  • michalskit Jan 15, 2009

    I just got the vizio 32" 1080p, connected to my cable box, using HDMI-1. I can not get sound to come out of the internal speakers.

  • genius4110 Mar 12, 2009

    I have a BRAND spanking new (1 month old) VIZIO 32"


    Never had a problem with it before.  When I switched it to play a DVD as I normally have done.


    Now when I switched back to cable/TV mode..I get NO sound.


    I have tried EVERY visible button on three remotes(TV, cable, DVD)
    and I can't get TV to be heard!


    it's frustrating


    I have even tried power buttons
    on all three remotes...still nothing!

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem. I could get an analog audio signal but no digitial signal. My problem was with the cable box setting. I have Cox Cable. With the Cable remote I went to settings/settings/Audio out and selected HDMI. Worked like a charm

Posted on Mar 01, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 70 Answers

Select the input on the Television that you want to use. Say if it is a DVD player you want to connect your cables to the output of the DVD player and then to the input of TV. If it is a cable box then connect to the coaxial input of TV. Use the TV remote control to select input that you want to view on TV. Such as Video 1, Video 2...Component 1...etc. Good luck

Posted on Oct 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Vizio tv 37" picture started to get darker


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Jan 11, 2017 | Vizio Televison & Video

1 Answer

Hi my led tv UE46D500 has no picture only sound.unplug for few hours and the picture comes back.now I have this problem every day sometimes I got the picture and sumtime no picture whole day. Help pls


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electro-medical.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board...

Jan 10, 2017 | Samsung UE46D5000 116.8 cm 46" 1080p...

2 Answers

Where do I find the serial number on vizio tv model D48-d0


Below the model number on back of tv right rear corner

Jan 08, 2017 | Vizio Televison & Video

1 Answer

Replaced convergence on toshiba 42HDX82...put back together now no picture or sound...could i have rehooked up wires wrong?


YES YOU COULLD HAVE WRONGLY HOOKED UP THE WIRES AND TANGLED THEM UP WHICH IS CAUSING THIS TO HAPPEN BECAUSE ITS CAUSING THE THE VOLTAGE THE TO ENTER AND CAUSING THIS TO HAPPEN

Nov 30, 2016 | Toshiba 42HDX82 42" Rear Projection...

1 Answer

I have checked cables and different methods of connecting, but the white and red audio out of my PVR appear to have stopped putting out sound.


Go through the setup of the PVR and check the sound settings. It sounds like it's only producing digital audio, that's why it works with HDMI but you want analog, so set the audio to stereo, or try every setting to see what works!

Jan 19, 2015 | Televison & Video

12 Answers

Comcast remote code for 42in sharp aquos lcd


the 10093 code worked perfectly!!! YOU ROCK! the codes in the comcast manual dont work. i don't have an aqquos, but a regular sharp hdtv... purchased in nov '07

Dec 14, 2007 | Televison & Video

Not finding what you are looking for?
Vizio L30WGU 30 in. HD-Ready LCD Television Logo

789 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vizio Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69570 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Vizio Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...