Question about Sony BRAVIA KDL-32S2000 32 in. LCD HDTV

1 Answer

KDL-32XBR6 NEW TV, NEW HDMI CABLE, followed all steps ,when tv is shut off reverts back to "TV " symbol and no tv guide .Not hdmi cable or box tried other inputs same whether hdmi or component inputs , tried another cable another box negative , must select via "input" on SONY remote control HDMI eachtime tv is turned on, new Fios system, 3 new boxes and new 26" LG/ 56" Samsung no problem.FIOS pinged box all ok .FIOS controls tv ok channels ok

Posted by on

  • GMAN RET Oct 20, 2008

    Reseting did it, your assistance is apprreciated

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 320 Answers

Try resetting the TV by holding down the "up" button on the remote (with the TV powered on) and then, while you hold down the up button on the remote, hit the power button on the TV. This should do a "factory reset" which will wipe all settings in the TV. There is no reason why the TV should not "remember the last input it was on when it was ;last turned off. Also be sure that the TV is not plugged into a switched AC outlet, like the outlet on the back of the cable bix. The TV should be plugged into an output that receives power at all times.

Posted on Oct 19, 2008

  • Any Guy
    Any Guy Oct 20, 2008

    Thank you! Your question was well stated, you listed all of things you had tried and gave all necessary information for a quick diagnosis!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My tv model magnavox26mf231d/37 shows hdmi is disabled and the hdcp authorization failure.


This could be a problem with the cable box or other set top box and not the TV. It's known to happen with Samsung cable boxes from Cablevision.

First try resetting the TV and set top box by unplugging both. Remove the HDMI cable from the TV and the set top box. Reconnect the HDMI cable. If you are using a Redmere or similar HDMI cable, make sure that the end labeled TV is connected to the TV's HDMI port. (These cables have additional electronics and are not reversible.) Connect the power cord to the set top box and wait 30 seconds to a minute. Then plug in the TV. To ensure the set top box does the correct handshake with the TV, turn on the TV first and set it to the HDMI input. Then turn on the set top box. See if this fixes the issue. (On some cable boxes, this can be a temporary fix. You may need to have the set top box replaced.)

If the above steps don't help, try a different HDMI cable. If that doesn't solve the problem, then the set top box is faulty.

I hope this helps.

Cindy Wells

Jan 10, 2015 | Televison & Video

1 Answer

CABLE BOX HDDVR IT's NOT WORKING WITH HDM1 in put. I have to use av1 source with 3 wire cable. Comcast tech saying it is tv problem.


Hello,
I am not with Comcast, but rather a much smaller family owned cable company.
You can check the user settings of the box to verify it is in the HDMI mode. Depending on what type of HDDVR you have that is.

For Motorola 62XX and 64XX models follow these steps to check.

1. make sure that your HDMI cable is connected to both the TV and the cable box.
2. Turn TV on, and verify it is on the proper input.
3. Turn cable box off.
4. Press menu button on remote or front of cable box.
5. A user settings menu will appear on the screen.
Note: if it did not appear you may have to connect another type of cables to continue.
6. Information displayed should be set to what your TV set is capable of. Most HDTV's will be set to the following:
16:9
1080i
480i
7. If you see additional HDMI settings as the forth item your TV and cable box are communicating across it, if not try unplugging both the TV and cable box and/or replacing the HDMI cable. Enter the additional settings by pressing the right arrow on the remote.
8. Change DVI to HDMI.
9. Press power to exit the user settings menu.
10. Turn cable box on, and switch TV to HDMI input if not already on it and see if the picture is coming in now.

Note: if you think that you messed up in the user settings you can always restore default settings by following steps 1 through 4 then press up arrow once and right arrow once.

I hope this helps you cable customers, as we appreciate your business unlike Dish and Direct!

Cheers!

Jun 18, 2010 | Philips 47PFL5704D 47 in. LCD TV

1 Answer

Can record Sky programmes but not view live.


You must connect up the TV to the SKY box, via Audio Visual cables too, in order to watch, recorded programs. You need to hook, up, Component, HDMI, or Composite, You select it by an EXTERNAL channel.
Connect the cable running from the wall into the "In" port on the Sky Box HD receiver. This cable brings in the signal to your receiver. Make sure the cable is securely fastened to the receiver, otherwise you might experience image and audio issues.
Attach an HDMI cable into the HDMI port on the Sky Box HDTV receiver. The HDMI is a single cable that provides both HD audio and video signals.
Plug the other end of the HDMI cable into an available HDMI port on the HDTV.
Power on the HDTV and the Sky Box HDTV receiver. Press the "HDMI" button on the TV's remote control. This will display the cable contents of the HD receiver onto the television.
e305ede.jpg

May 08, 2010 | Sony BRAVIA KDL-46W4100 46 in. LCD HDTV

2 Answers

Sony Bravia KDL 52Z5100 - no sound only picture. HDMi cable works fine with another TV, so no probs with cable TV.


A short fix is to unplug the hdmi cable and shut down the tv compleetly, then get the tv on and plug it in, the tv see the new connection and reset the value's for sound

Feb 15, 2010 | Sony BRAVIA KDL-46S2000 46 in. LCD HDTV

1 Answer

Sony kdl-40v5100 has handshake problem


1.This issue sounds as though the TV connection circuit has an issue.
2. You have changed the DVR and the HDMI cables and you still have an issue with the video (pink screen) indicates a video circuit issue ( improper voltage or current) at the video section of the circuit.
3. This will require some troubleshooting by a qualified tech.
4. To make sure, try connecting another properly working LCD TV to the cable box or DVR an check.If you get a picture and sound properly it is the TV.
5. Usually a cable box is QA'd (quality assured) by the company and will not be sent unless tested 1st


Feb 05, 2010 | Sony Bravia KDL-40V5100 40 in. LCD HDTV

1 Answer

Kdl-46v5100 tv now dos'nt recognize hdmi.says no


Try another HDMI cable. I have seen them become defective. If it is not the cable, then try another HDMI device to test the TV.
Without an HDMI cable tester, and a way to measure the output of the HDMI source device the only way to resolve this is with the process of elimination.
Jerry G.

Jan 19, 2010 | Sony Grand WEGA KF50WE610 50" Rear...

1 Answer

No HDMi signal


I ran across this problem before. Turned out being a bad HDMI cable. The was one prong in the cable bent and caused the problem. Try a different cable first. Sometimes it is the simplest things that cause the problems.

Jan 08, 2010 | iLO 3200 32 in. LCD Television

1 Answer

Sony connectivity


OK, here are info...
first unplug TV and dvd recorder from AC outlet and put hdmi cable as follows...
at rear side of TV, you have 2 hdmi inputs, hook hdmi cable in any one of them and other end of hdmi cable will be hooked in hdmi out of dvd recorder rear side.
Now, plug both units in AC outlet and power up, go to TV menu > hdmi setup > and perform device list update.
TV will recognize dvd recorder and you will see dvd recorder logo screen.

Let me know if you need further info / help.

Dec 23, 2008 | Televison & Video

1 Answer

BRAVIA TV KDL-40V2500


i had the same problem and the only way i could solve it was to disconnect power from the tv, let it "reset" then it would be ok for a bit. the problem went away entirely when the cable company updated its software for its hd box. might be coincidence....

also, pre-update, the resolution wouldnt automatically set correctly. If I turned on the tv to a hi def station, it would set to 480 and only set to 1080 when i changed to a normal station then back to the hd. then it was fine. again, after the update from the cable company this went away.

Sep 28, 2008 | Sony BRAVIA KDL-40V2500 40 in. LCD HDTV

4 Answers

Color screen


If you are hooked up with a DVI cable you need to either use hdmi, component cables or turn off the non hd override...

Jun 15, 2008 | Toshiba Regza 32LV67U 32 in. LCD HDTV

Not finding what you are looking for?
Sony BRAVIA KDL-32S2000 32 in. LCD HDTV Logo

435 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

72601 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...