- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1. turn on device 2. press setup (underneath on/off) till red light
stays on the take finger off the button 3. press and quickly release
device button (tv,vcr,etc.) the red indicator blinds off once 4. press
the on/off button (up to 300 times) until the device is to be controlled
turns off the red light blinks off with each button press 5. press and
release enter to install code
Hello, Well I have a Phillips universal remote but but maybe they are the same. For the Orion TV try 105, 115, or 713. For The Pioneer DVD Try 042. If one or more does not work, Look for a "code Search" button. Turn on the device, then push and hold down the code search button until the red indicator stays on, then release the search button. Press and quickly release the desired mode button (TV, DVD, etc). The red indicator blinks off once. . If it is a tv or vcr use the channel up button until the channel changes. Press the power button on DVD and see if it is right Hope this helps.
to program with codes hold device butoon while entering the 4 digit code, manual press and hold device and on/off button til light comes on, press on/off every 2 secs or so til it turns off device, then press stop to save code. i have code list for jensen jer 422 remote if you need codes email me at firstname.lastname@example.org
I have this remote...only Pioneer listings are as follows:
To program (for example TV setting):
Press and hold down TV while entering code i.e. 1-0-0-4
To manually cycle through all codes (example for TV):
Press and hold TV while pressing and holding ON/OFF, after 3 seconds the on/off button light should come on and stay on - release all buttons. Turn your TV on and press ON/OFF once each 5 seconds until your TV turns off. When it turns off, you have the correct code - press the stop button. Good luck.