Kenmore Washer My mom has a Kenmore washer that is about 10 years old. She was doing a load tonight, when the washer stopped as it was supposed to drain. Any thoughts?

uE error code 79631512210 Kenmore Elite Washer - Sears ...

www.searspartsdirect.com > Ask an Expert

Jan 10, 2014 - uE error code 79631512210 Kenmore Elite Washer ' SearsPartsDirect. ... After unloading the washer completely, the machine attempts to rebalance the .... to ensure proper fit and to keep appliances running for years to come.

UE Error code on my front loading Kenmore washing machine

www.shopyourway.com > Manage My Life > Questions

Jun 13, 2011 - I have a Kenmore 3.5 cu. ft. front loading washing machine (model #4027) and it is 1 year old. ... what does the F35 error code on my kenmore elite front loading washing machine mean? F13 code on Kenmore Elite HE3 front loadingwashing machine.

Kenmore front loader. stopped at rinse. First ck to see if you washer works at different settings if so its very possible its your timmer or what called the wig wag or solonoid this switches the machine to spin & rinse. A basic service call should resolve your problem.

Hi,
Sounds like you have multiple problems...you are right... probably not worth fixing...
Look at the front loaders... they use way less water and are more gentile on your clothing...



If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin
http://www.fixya.com/support/r4617986-washing_machine_not_pump_or_spin

If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing Machine not draining and or not spinning
http://www.fixya.com/support/r4784376-front_load_washing_machine_not_draining

heatman101

it is approximately 10 years old.



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

hi thanks for the question do you shut the water off with timer do you unplug to stop the water if the only to stop the water is to turn taps off replace the water valve also check the small plastic tube that goes to the water control switch it will get lint in that tube and cause the same problem remove small tube and clean thanks the appliance doc

interrupted wash cycles and also give a code of F06. A service tech was supposed to be at my residence today... he did NOT show. This machine is little over a year old. Tried unplugging with no sucess. Any help would be appreciated.

if oil on clutch ckd top of gearcase under clutch drum top gearcase seal may be leaking

2005 why would you do that,you could have bought a new washer with newer technology and for the money and time that went into that,a normal washer lasts from 10 to 13 years now,i wouldn't put another nickle into that and i wouldn't buy another frigidaire either,i'm surprised you didn't have any problems with the computer board,these washers are known for that,usually the spider gear goes from overloading and using to much he soap,you should only be using two tablespoons of he soap that's it,but i've never heard of the springs breaking the tub,either it was installed wrong or something could be wrong with the shocks or you're overloading the washer but that's strange,BUY A NEW WASHER,what happens if the motor goes next or the computer board,it's old,you'll never get a washer like the old maytags or whirlpool top loaders that would last for 30 years,if you get over 10 years out of your washer you're ahead of the game

i have the same onebut fridgeair but mine would only wash and nothing else and it turned out to be the motor was weak

Hi tieuvodanh; Sounds like the timer has gone out. If you can advance the selector dial manualy, and the machine continues to operate as it should, then this is the problem. Replacing the timer will require some advanced knowledge of washers and the ability to use a box of hand tools. A good handy man will be able to repair this for you. Best regards; HELP2DIY Please don't forget to rate my answer.