Can someone please tell me what error E20 means and how to fix it? It comes up within 10 minutes of the wash cycle. I removed all the clothes from the machine and pressed start. It tries to drain water and will not go past this cycle. If I set the washer to spin only it will drain and spin in that setting, but not when washing. Thanks in advance for any help. I think I can fix the clog in the pump if I could get the front panel off the machine! Any Ideas????
Http://www.fixya.com/support/t615626-error_code_e20
Sorry wrong link.
E20 is a problem with the drain system, start inspecting the drain hose, if it is not clogged, then the drain pump is either clogged or faulty.
See the instructions here.
×
HI,
E20 is a problem with the pump, or drain hoses.
remove the 2 screws on the bottom and the front access panel comes off
pump is on the right, remove hoses from it, remove pump from machine then remove whatever is in the pump
Here is a service manual;
http://www.mediafire.com/download.php?0g...
It is for frigdaire but not exactly for your model.It will help you fix this issue.
×
Hello friend, thank you for your post!
I see your question is labeled under Frigidaire washer, ATF6000ES, and your washer is receiving an error code of "E20". "E20" stands for the water is not pumping out fast enough which means it could be an issue with your control panel or drain pump. I would recommend having a professional come out and properly repair your appliance. I hope this is helpful. -Matt
Hello - The error code "E20" typically means the water is not draining properly or not pumping out fast enough. Does the washer making a humming noise? If so, either the drain hose may be kinked or the drain in the house is clogged. Once you have confirmed and cleaned the hose and issue continues contact a professional to move forward accurately. The unit may possibly have a faulty pump or control board.
560 views
Usually answered in minutes!
×