Question about Nikon Coolpix 5700 Digital Camera

1 Answer



Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem since yesterday! When I switched on the camera it shows only black screen with all the settings on it. I can change the settings and I can take a picture,but it will be only a absolutely black picture! :(

Posted on Jul 16, 2006

1 Suggested Answer

  • 146 Answers

SOURCE: pictures taken with camera and no memory card inside how to


There is a copy option on the playback menu.
This copies to and from the memory.

Posted on Feb 04, 2010

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

When i turn on my camera, it won't read my memory card and won't bring up my photos that are already on my memory card. I put my memory card in and i go to take a picture and it says 'pictures...

If the card was one that was previously used in another camera, you can't use it in this camera without formatting it. Move the pictures to a computer and format the card via the camera (remember that all data on the card will be erased). Before formatting the card however, make sure the battery has sufficient charge as this process can take some time. Also remember to never interrupt this process as it can damage the card. The format option can be found in the settings.
Note: pictures taken on one camera can't be viewed on another camera.

Jun 23, 2011 | Panasonic LUMIX DMCZS7 DMCTZ10 Digital...

1 Answer

If display screen on camera is damaged, will the pictures already taken be damaged?

No your pictures already taken are fine as they are stored on the memory card.

If there is no other damage to the camera you can still take pictures and they too will be fine.

Hope this helped. Please rate the answer if it does.

Mar 11, 2010 | Fuji FinePix J10 Digital Camera

1 Answer

When transfering pictures from camera to PC EasyShare will not transfer some pictures. "picture already exists" in My Collection. These are all new pictures taken with blank memory card. This occurs even...

Scrap the camera! Kodak hasn't and won't address the problem. Most picture download software won't recognize the camera. The only solution is to remove the memory card from the camera, put it in USB adapter and treat it like a flash drive. Cumbersome. Awkward. Stupid. After you scrap the ****, tell your friends so they don't make the mistake of buying a Kodak.

Dec 26, 2009 | Kodak EASYSHARE M1063 Digital Camera

1 Answer

I have a memory card that hold 700 or so pictures,

It could be, that what you are seeing, is the INTERNAL memory is being taken up with your pictures. Connect your camera to your computer with a USB cable and you will probably find them.

Oct 04, 2009 | HP Photosmart M417 Digital Camera

1 Answer

When you take a picture, camera shows memory card error

These cameras are on the list of the ccd problems.
Here is a link to the site you may need. Canon will repair it for free if it is the ccd problem. Note that they will pay for shipping both ways as well if it is the ccd problem. Call them on the toll free number.
Canon Repair Service Center

Aug 31, 2009 | Canon PowerShot A75 Digital Camera

1 Answer

Camera does not show taken ( saved) pictures

problem is in memory card...i think. try with cleaning memory card contacts. use pure alcohol and small piece of cotton to clean dust or other dirt. if this not help, try some card reader to transfer images from camera to PC. try also with some other camera. it's possible memory card is damaged and you can't do nothing. try reinstall nikon software on your PC.

Feb 19, 2009 | Nikon Coolpix L15 Digital Camera

1 Answer

Pictures are not taken.

I would try another memory card. Do not buy cheap ones.

Dec 24, 2008 | Nikon D70s Digital Camera

1 Answer


Two things to try...
A) If you have a card with some photo's on it then put it in the camera... Will the camera display the photos from the card in view/play mode? If so then the screen is working but the sensor in the camera may have died (the but that captures the image).
B) Try taking a picture with the camera (go through the steps to take one even though you can't see anything on the screen). Then put the memory card in a reader or a friends camera and see if the picture did get taken. If so then the sensor is still okay and the fault may be with the display.

If the display will show images from the memory card but doesn't show anything when in picture-taking mode but the camera does take pictures then the camera has a fault that isn't either the sensor or the LCD. It could then be an electronic failure or a problem with the mode selection switch.

Hope this helps to figure it out.


Jan 04, 2008 | Panasonic Lumix DMC-LZ3 Digital Camera

1 Answer

Cannot access pics

Once you took pictures without a memory card, all pictures taken will automatically be saved on the INTERNAL MEMORY of the camera.
When taking pictures with a memory card, all pictures are just saved on the memory card itself.
If you are seeing 100-757 on the LCD screen. It means that there are already 757 pictures taken from the first time you've used the camera.
It is possible that some of the pictures are in the internal memory and some are in the memory card.

1) Remove memory card out of the camera
- Turn on camera
- View pictures on the internal memory
by just pressing on the PLAY mode button
(lowest of the 3 little buttons)
- Pictures seen are just the ones saved on the internal memory

2) Return memory card back in the camera
- Turn on camera
- View pictures on the internal memory
by just pressing on the PLAY mode button (
lowest of the 3 little buttons)
- Pictures seen are just the ones saved on the memory card itself

*** If you want to transfer pictures on the internal memory of the camera to your MEMORY CARD, you just have to follow the steps below:
- Make sure there is a memory card inside the camera
- Turn on camera
- Press on PLAY mode button to view pictures
- Press MENU/OK button
- Keep scrolling to the right until you see COPY TO CARD
- Select YES using the arrow keys
- Press MENU/OK to confirm
* When you've done these steps, all pictures from the INTERNAL MEMORY of the camera will be copied to your MEMORY CARD but it depends on the space left on your memory card

** If still, you could not view the pictures, it's possible that the pictures are really gone when you have transferred the previous pictures to your computer.

** Once you have transferred pictures to your PC, and you have deleted those on your camera, the FILE NAME of the pictures will not start from 100-001 again unless you have reset the file name on the settings of your camera.

In example, i already have 256 pictures on my camera so the filename reads 100-256 for the last picture taken. And then i decided to transfer those 256 pictures to my PC and i deleted those immediately after being transferred. So, as i took another picture, FILENAME will start with 100-257 if i have not reset
the FILE NAME settings to 100-001.

Hope i've helped you enough.

Jan 02, 2008 | Samsung Digimax S630 Digital Camera

1 Answer


your camera has a damaged CCD. the only solution to fix the problem is tochange the CCD.

Jun 12, 2006 | Nikon Coolpix 5700 Digital Camera

Not finding what you are looking for?
Nikon Coolpix 5700 Digital Camera Logo

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Digital Cameras Experts


Level 3 Expert

94267 Answers


Level 3 Expert

3287 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Nikon Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides