Question about RCA HD52W58 52" TV

1 Answer

RCA D52W20 I have an RCA model D52W20, and I need the part number for the green CRT board (the board that connects to the middle (green) tube). The numbers from the board are GRNHYB-570 DM4 18419413642992 Thanks for any help!! John

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Expert
  • 146 Answers

That board is called a Green Kine Drive pcb. The part number is 266860.

Posted on Nov 10, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Got green tint on picture

If model number given (32mt6015d) is correct it is either a issue with the picture tube or the board that connects on the end of the tube.

Mar 19, 2012 | Philips Magnavox 32MT6015D TV

1 Answer

No picture but i have sound on my RCA F32676SB 32"

You do an adjustment on the screen nob on the flyback transformer?Resolders the CRT-(tv tube) YOKE wires R,G,B connections to the main PCB board?Resolders the video board CRT-(tv tube)video board pins sockets that connect the video board and the CRT-(tv tube) together.

Feb 13, 2011 | RCA F32676SB 32" TV

1 Answer

My model is sony trinitron KV-HW212M53. now the color of sreen display is so bad, some time green, how to solve this problem?

Standard CRT(tube tv) have a video board,that the board is connect to the CRT tube pins neck to get a picture.That board have dead parts or cold solders parts on it to cause this problems.

Oct 23, 2010 | Sony Televison & Video

1 Answer

No filement on rca f36669 pix tube

I assume you have either looked into the rear cover, or removed it. The worst case scenario is an open heater (filament) in the crt itself although this is not real common. If you can use an ohmmeter/continuity tester you can see on the crt pc board which pins are the filaments. Pull the socket off and check for low resistance between these two crt pins if low then odds are the filament is ok. The next thing is to check the solder at the filament connections on the crt board as often you will find "ring cracks" around them and they need re-soldering. The filament circuit is supplied from the IHVT (flyback). Generally with the socket unplugged from the tube you should find low resistance across these two connections also. You read back through the transformer winding if it is ok. If it tests open you may have an open fuse resistor or a bad solder connection at the flyback. The filament (heater) terminals are usually labeled on the main board at the transformer.

Nov 18, 2009 | RCA Televison & Video

1 Answer



Aug 28, 2009 | RCA HD52W58 52" TV

2 Answers

What is part number for main power supply board on a model#d52w20 rca

you have to open the TV up and it should be on a white sticker on the mother board.if you do not find it google RCA model #d52w20 main power supply board

Aug 26, 2009 | Televison & Video

2 Answers

Green Screen

did you check the voltage output of three transistors going to the crt pin of picture tube? it should be somewhere in 150V to 160V, they should have the same voltage. Try resolder all transistor and its component or repace the transistor from the green section of crt board

Nov 09, 2007 | RCA 20V500T 20" TV

1 Answer

RCA 32" TV - Model #32F531T - Faded to black

Isolate filament voltage from CRT,i.e. unplug Crt socket from pix tube.Measure filament voltage on CRT PCB.If present,suspect bad pix tube.If missing,solder any/all connects in filament circuit,meaning CRT board first then main PCB.

Aug 08, 2007 | RCA 32F531T 32" TV

1 Answer

RCA 25: television

Sounds to me like a bad picture tube with circle rainbow like colors.Good luck.

Sep 03, 2006 | RCA F25423 25" TV

Not finding what you are looking for?
RCA HD52W58 52" TV Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69795 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides