Question about Kodak Easyshare M753 Slim Digital Camera
The flash on my camera doesn't work. The settings show that it should flash but it doesn't.
SOURCE: Kodak EasyShare M753 bent lense
if the camera will be sent it to the authorized repair center, the repair cost is arranged according to model, not issue
the repair cost of M753 is around $60-65 + local tax + kodak's shipping and handling
www.kodak.com/go/itg to arrange repairs - you can also see the repair cost from the website and other options if you think it's not worth it
Posted on Feb 13, 2008
SOURCE: KODAK M753 LENSE ERROR 122,1,0,0
I had this problem too, my camera just randomly stopped working and shut off. When I tried to turn it on again it said the whole 'lens error' bit and then shut of. The lens looked a bit crocked so I just gently tried to straighten it out and ta-da! Good as new!
Posted on Nov 03, 2008
I also have a Kodak Easyshare and when mine did that I had dropped it and had to send back to factory for repair with no warranty on it if it had been dropped.
Posted on Jun 02, 2009
its obvious a malfunction that didn't occur by bad handling ..and if the device it is still in the warranty period , my advice is to go for it if you never open it or other things that you wouldn't suppose to do
Posted on Jul 15, 2009
The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.
Use these at own risk as it may further damage the camera.
Firstly , try connecting your ac adapter or usb cable.
Try holding the shutter button while switching on the camera.
Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).
Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.
Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.
Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.
Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.
If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.
You can also have a look at THIS link.
Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.
Posted on Dec 14, 2010
Tips for a great answer:
May 08, 2012 | Kodak Easyshare M753 Digital Camera
Dec 06, 2010 | Kodak Easyshare M753 Digital Camera
Mar 07, 2010 | Kodak Easyshare M753 Digital Camera
Oct 16, 2009 | Kodak Easyshare M753 Digital Camera
Aug 18, 2009 | Kodak Easyshare M753 Slim Digital Camera
Aug 06, 2009 | Kodak Easyshare M753 Digital Camera
Nov 23, 2008 | Kodak Easyshare M753 Digital Camera
146 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: