Question about Sharp 25N-M100 25" TV

6 Answers

My sharp t.v. has no sound, mute button set on 0

I have a nice sharp t.v. about 4 years old. Picture is wonderful, but no sound, when pressing the volume button willgo up no sound. Also this keeps popping up on screen, stereo,sap, mono. Currently set on stereo. Puzzled for sure. Any help would be greatly appreciated. Thanks,Victoria

Posted by on

  • 4 more comments 
  • CherylC Nov 28, 2007

    I have a Toshiba, however, I can press the volume button higher, but as soon as I let go, the volume goes down to zero. Great picture -- no sound. Any information would be greatly appreciated! Thank you.

  • mick88 Jan 04, 2008

    I have a similar problem with my 01sony(KV27S13) the sound just went out today. No matter where the volume control is set it's silent. I thought Sony was a good brand? help DS

  • mick88 Jan 04, 2008

    well I just turned off my dish and the sound is working, go figure! DS

  • Anonymous Dec 20, 2008

    I have a similar issue with sound, the vol is as high as it can go and I can hardly hear the sound..

  • Anonymous Apr 01, 2009

    I have a sharp 27 in, nice picture but the sound went off today. No closed caption or text, mute is off, tried all the suggestions below but still silent.

  • dirty_z28
    dirty_z28 Jan 30, 2012

    i realize this is an old post but maybe some one new will see. I recently got a 37" sharp from a relative becouse sound went out. i fooled around with settings and menu and couldn't find anything. so i just hooked up surround sound. while playing my PS3 the tv turned off. when i turned it back on it had sound and been workin for 3 days now. turns out while i was messing with settings i turned on a 3 hour non active option. if the remote or tv hasn't been touched it will turn itself off. I dont know if this will solve anyone elses problem but it worked in my case thus far.

×

Ad

6 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Disconect dish or cable?

Posted on Jan 04, 2008

  • mick88 Jan 04, 2008

    Yes I diconected my dish and the sounds came back but I only get a few channels DS

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Dear Internets

My co-worker is having a similar problem.
She has a SHARP 26" LCD tv purchased from PC richards, and she says, if you can belive it, that the volume is turned up to 50, but she can barely hear it.
We firmly believe a TV should produce an dequate level of volume with having to hook it up to "surround sound"
Thanking you in advance for any advice!

-LA

Posted on Feb 06, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Replace audio ic or transistor

Posted on Mar 16, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 513 Answers

Check to see if you're getting closed captions. If so it's an indication that mute is actually on somehow. I would check and recheck the cables, replace them. Could be that they only transfer video. Try connecting an external input device such as a DVD player or a camcorder to the front input jacks, on the front face of the TV. If you're getting audio then it's either the cables used or the back panel input jack. That's for the simple fixes. Anything else I would recommend you to take it to a repair shop :[ Good luck

Posted on Jun 13, 2006

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I checked all the connections on the back of the dish receiver, and sure enoughthe audio jack was not connected. problem fixed

Posted on Jul 31, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Test your audio video if sounds is good, check the SIF.

Posted on Oct 10, 2007

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Sharp (friendly series II)

well, i am no tech, you either need to choose one of the 3 above to watch your tv. I have stereo on mine for better sound. hope this helps.

Posted on Oct 04, 2007

  • 1694 Answers

SOURCE: Sharp (friendly series)

1)Stereo==stereo sound 2)SAP=second audio program,i.e.alternate language 3)Mono=all the sound,left side & right side, no stereo effect Hope this is helpful--let me know.

Posted on Oct 04, 2007

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Clarion XMD3 am/fm marine cd player that came with my 2000 Searay boat. I was somehow able to turn the inside cabin speakers off last season and only have the outside speakers on. I must have...


Might be set on mute !

Mute instructions
Use this function to turn off the sound immediately.
1. Press the [ M ] button.
The sound turns off and "MUTE" appears in the display.
2. Press the [ M ] button again to cancel the mute mode

in this other user manual it is a mute button[m] page 4
http://www.clarion.com/us/en/MungoBlobs/552/388/XMD3.pdf

or

Adjusting the fader
1. Press the [ A-M ] button and select "FAD 0".
2. Press the [ w ] button emphasizes the sound from the front
speaker, press the [ z ] button emphasizes the sound from the
rear speaker.
? The factory default setting is "FAD 0". (Adjustment range: F12 to
R12)
3. When the adjustment is complete, press the [ A-M ] button
several times until the function mode is reached

May 04, 2017 | Clarion XMD3-RET AM/FM MARINE CD PLAYER

3 Answers

I have a sharp aquos tv model lc32d6u, we have lost the audio, we have tryed turning the set on and off, nothing. we are serviced by Comcast and it is not the box. I can hear a small click when we turn the...


Try this
1. Power off both the TV and the DVR.
2. Plug in the HDMI cable to both units.
3. With the DVR off, press and hold the power button on the unit until the word BOOT appears on the display.
4. Wait until the unit reboots and shows the clock again, then power the TV and the DVR up.
5. Choose the appropriate input on the TV for HDMI.
6. Use the SETTINGS button on the DVR remote to get into the "more settings" option.
7. Find audio settings and choose HDMI output, press select.
Hope that helps.........

Jun 28, 2008 | Sharp Audio Players & Recorders

1 Answer

LOOKING FOR PICTURE SETTING SAMSUNG MO.NO.LN-T5265F


This may help you...you can also get an owners manual free on line.


English - 23
Using Automatic Picture Settings
Your TV has Three automatic picture settings ("Dynamic", "Standard", "Movie") that are preset at the factory.
You can activate either Dynamic, Standard, Movie by making a selection from the menu.
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the ENTER button to select "Mode".
Press the ??² or ??¼ buttons to select the "Dynamic", "Standard", "Movie" picture
setting. Press the ENTER button.
?³ Choose Dynamic to increase the clarity and sharpness of the picture.
?³ Choose Standard for the standard factory settings.
?³ Choose Movie for a natural Image without picture enhancements.
3. Press the ??² or ??¼ buttons to select "Contrast", "Brightness", "Sharpness",
"Color", or "Tint(G/R)", then press the ENTER button.
4. Press the ??? or ??? buttons to decrease or increase the value of a particular item.
For example, if you select "Contrast", pressing the ??? button increases it.
Press the ENTER button.
Press the EXIT button to exit.
• When you make changes to Contrast, Brightness, Sharpness, Color, Tint(G/R)
the OSD will be adjusted accordingly.
• When in PC mode, Tint, Sharpness, and Color are not available.
Press the P.MODE button on the remote control repeatedly to select the desired
picture mode.
Picture Control
Move Enter Return
Mode : Dynamic ???
Contrast 1 00
Brightness 50
Sharpness 85
Color 55
Tint G 50 R 50
Balck light 1 00
??¼More
TV Picture
Move Enter Return
Mode : Dynamic
Contrast 1 00
Brightness 50
Sharpness 85
Color 55
Tint G 50 R 50
Balck light 1 0
??¼More
TV Picture
Dynamic
Standard
Movie
Move Enter Return
Mode : Dynamic ???
Contrast 1 00
Brightness 50
Sharpness 85
Color 55
Tint G 50 R 50
Balck light 1 0
??¼More
TV Picture
50
??² Con trast ??¼
Move Adjust Return
English - 24
Adjusting the Color Tone
You can change the color of the entire screen according to your preference.
1. Press the MENU button to display the menu.
Press the ENTER button to select "Picture".
2. Press the ??² or ??¼ button to select "Color Tone", then press the ENT ER button.
3. Press the ??² or ??¼ button to select "Cool2", "Cool1", "Normal", "Warm1",
or "Warm2".
Press the ENTER button.
When the picture mode is set to Dynamic or Standard, Warm1 and Warm2
cannot be selected. Movie mode is only available.
Move Enter Return
??²More
Color Tone : Cool2 ???
Detailed settings ???
Size : 16 : 9 ???
Digital NR : Low ???
Active Color : On ???
DNle : On ???
Reset : OK ???
TV Picture
Move Enter Return
??²More
Color Tone : Cool2
Detailed settings
Size : 16 : 9
Digital NR : Low
Active Color : On
DNle : On
Reset : OK
TV Picture
Cool2
Cool1
Normal
Warm1
Warm2
Activating Backlight
You can adjust the screen brightness by adjusting the LCD backlight brightness. (0~10)
1. Press the MENU button to display the menu.
Press the ENTER button to select "Picture".
2. Press the ??² or ??¼ button to select "Backlight", then press the ENTER button.
3. Press the ??? or ??? button to decrease or increase the valueof the backlight
brightness.
Press the ENTER button.
Press the EXIT button to exit.
Move Enter Return
Mode : Dynamic ???
Contrast 1 00
Brightness 50
Sharpness 85
Color 55
Tint G 50 R 50
Balcklight 1 0
??¼More
TV Picture
5
??² Balcklight
??¼
Move Adjust Return
Move Enter Return
??²More
Color Tone : Cool2
Detailed settings
Size : 16 : 9
Digital NR : Low
Active Color : On
DNle : Off
Reset : OK
TV Picture
OK
Cancel
Resetting the Picture Settings to the Factory Defaults
1. Press the ??² or ??¼ button to select "Reset", then press the ENTER button.
Press the ??² or ??¼ button to select "Cancel" or "OK" then press the ENTER button.
Press the EXIT button to exit.
Each mode can be reset.

Feb 04, 2011 | Televison & Video

1 Answer

How to program


I could not find the code for my Sharp TV but the Code Search Method Worked.
1. Manually turn on the TV
2. Press and hold the Power and Mute buttons until the red light remains on.
3. Release the buttons.
4. Press the Power button to begin the code search.
5. Press the Power button repeatedly until the TV turns off.
You might have to press the button 100 times or more to find your code.
6. When the TV finally turns off, press and release the Mute button to save the code.

Jul 18, 2009 | Zenith ZENSP Remote Control

1 Answer

I have a magnavox projection tv...picture /no sound


I put new batteries in the remote and reset the cable box.

Mar 27, 2009 | Philips Magnavox 50ML8105D 50" HDTV DLP TV

1 Answer

I'm looking for the manual for a Mitsubishi VCR HSU447 with the remote control RM75502 so I can program my TV to it. Thanks


1.- Turn off your TV
2.- On the remote control, set the VCR/TV slide switch to TV position.
3.- While holding in SP/EP button, press the code button listed below that corresponds to the brand of your TV
4.- Press TV POWER on the remote control. Once your TV has turned on, your remote is set up to operate your brand
TV.

Brand of TV Brand Code Button
Mitsubishi 1,2,3
Fisher 0
G.E. VOLUME UP
Goldstar 2,9
Hitachi 8
JVC MUTE
Magnavox 4
NEC 2,9
Panasonic CHANNEL UP, CHANNEL DOWN
Pioneer 6
Philips 4
Proscan VOLUME UP
Quasar CHANNEL DOWN
RCA VOLUME UP
Sanyo 0
Sharp 3,5
Sony VOLUME DOWN
Toshiba 7
Zenith INPUT
I finnaly found my VCR Manual, and I'm glad to share this info with you, because I was looking for the manual all
over the web and FOUND NOTHING!. Bye!

Mar 15, 2009 | Mitsubishi Televison & Video

1 Answer

JVC AV-28WT2EN picture has too much green


go into service mode by pressing mute and i button at once on your remote, choose option 2, change green setting by pressing 6 button until color looks natural,save by pressing ok button and leave service mode by pressing i button.
good luck
knut

Mar 13, 2009 | JVC Televison & Video

2 Answers

Picture calibration settings for 42lg70


Picture Menu
Picture Mode: Expert1
*Backlight: 16
*Contrast: 83
*Brightness: 53
Sharpness: 50
*Color: 55
*Tint: 0
Expert Control
  • Fresh Contrast: Off
  • Noise Reduction: Medium
  • Gamma: Medium
  • Black Level: Low
  • Real Cinema: On
  • TruMotion: Low
  • Color Standard: HD (N/A w/HDMI)
  • White Balance: Warm
  • **Method: 10-Point IRE
    • 10 IRE
      • **Red: 1
      • **Green: 2
      • **Blue: -16
    • 20 IRE
      • **Red: -6
      • **Green: 0
      • **Blue: -7
    • 30 IRE
      • **Red: -5
      • **Green: 0
      • **Blue: -4
    • 40 IRE
      • **Red: -8
      • **Green: 0
      • **Blue: -4
    • 50 IRE
      • **Red: -4
      • **Green: 4
      • **Blue: -4
    • 60 IRE
      • **Red: -6
      • **Green: 6
      • **Blue: -5
    • 70 IRE
      • **Red: -8
      • **Green: 3
      • **Blue: -10
    • 80 IRE
      • **Red: -8
      • **Green: 7
      • **Blue: -16
    • 90 IRE
      • **Red: -9
      • **Green: 5
      • **Blue: -18
    • 100 IRE
      • **Red: -10
      • **Green: 4
      • **Blue: -9
Color Management System
  • Red Color: 0
  • Red Tint: 0
  • Green Color: 0
  • Green Tint: -15
  • Blue Color: 0
  • Blue Tint: 11
  • Yellow Color: 15
  • Yellow Tint: 2
  • Cyan Color: -15
  • Cyan Tint: 0
  • Magenta Color: 0
  • Magenta Tint: -1

lg70 nice tv excellent processor just to bad there is no intensity control on color management oh well still better than what the three s are pushing block out the hype lg will be number 1 in a few years haters are starting to come around and well leds coming,

p.s. i dont work for lg just tired of losers bashing stuff because they dont own it.
im isf certified those settings are right on the money straighter than a ruler

Oct 05, 2008 | Televison & Video

1 Answer

Sound but no picture


If "mute" has been selected, the volume will still show on the screen, and will only unmute if the volume +button is pressed or if mute button is pressed again...accordianman

Mar 09, 2008 | Audio Players & Recorders

2 Answers

Tv has an advertisement that wont go off


Press the up and down volume buttons on the TV at the same time. This will turn off demo mode.

Aug 29, 2007 | Philips Magnavox 27MS343S 27" TV

Not finding what you are looking for?
Sharp 25N-M100 25" TV Logo

9,011 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75756 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...