Question about Pioneer VSX-1014 Receiver

2 Answers

Mcacc light is flashing willnot turn on

Mcacc light is on and unit will not turn on/ work

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Press the ENTER + VIDEO2 buttons on the front panel of the unit for 2 seconds. The unit then comes back to life! Lifesaver... I've been there... pjaca

Posted on Dec 04, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Ah, man thanks pjaca. I did what you said when mine was dead and it came back to life!!! ENTER + VIDEO2 works. You just saved me $700, thanks man!

Posted on Dec 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Pioneer SC-1223-K MCACC light keeps flashing and receiver does not power on. Help Please!!!!


You may try a factory reset; found in your owner's manual, but most likely, your receiver has DC Offset, meaning a damaged amplifier. If you are interested in repairing your Pioneer, please visit my website at audioserviceclinic.com. Thank you.

By the way, if it's under warranty, contact Pioneer. It has a 2 year warranty. By the way, I worked for Pioneer as an audio engineer.

May 26, 2014 | Pioneer Audio & Video Receivers

2 Answers

VSX 60. MCACC blue Light flashes and unit will not turn on


try pressing and holding 'advanced surround' and the power button. This should reset the protect circuit. If it turns off again right away, then there is a problem with the amp that needs to be repaired.

Mar 25, 2014 | Pioneer VSX-52TX Receiver

2 Answers

Pioneer VSX-72TXV wont power up. mcacc light just blinks.. unit does not have a video 2 button on the face.


try holding the "TUNE -" button and the ZONE 2 on/off button and see if it turns on. If its turns on, but turns back off again, you either have a problem with your speakers (try disconnecting them) or there is a problem with the receiver that needs to be repaired.

Dec 06, 2013 | Pioneer VSX-72TXV Receiver

1 Answer

My pioneer vsx 921 switched off while playing loud. ADv MCACC is flashing and it is not powering on? What could be the problem?


Your unit is locked in protection mode. Hold the advanced surround button and the power button to turn it back on. If it shutdown right away, then you shorted out the amp and need to take it in for repair.

Dec 28, 2012 | Pioneer Vsx 921 K Av Receiver Black

3 Answers

Pioneer SC-LX75 with a flashing green MCACC


dear, I have a problem when we have been listening to music through headphones turned on the light mccac (amp.err.) and then blocked pioneer sc-lx75. the unit can no longer turn a blue light constantly flashes. I've tried all the variants of the wires however unsuccessfully. device was purchased in Germany and is still under warranty however I live in Bosnia and here we have an authorized representative. my mate who is a wizard for technique will look at it blindly, so I ask if we can roughly tell which way to go. I know this is uncommonly what you ask, but the way to Germany and back to me pretty much cost time and money. Please help if at all possible, greeting dado from Banja Luka.

Nov 24, 2011 | Pioneer Audio & Video Receivers

2 Answers

On my Pioneer receiver (model # vsx-9100tx) MCACC light keeps flashing and system will not power on. Please advise.


Hi the mcacc light keep's flashing and will not come on. Can you help with this thank you Lee

Dec 22, 2010 | Pioneer Elite VSX-9100TX Receiver

3 Answers

Pioneer VSX-1019 with a flashing red MCACC


you can "release" the error by pressing the "down arrow" and the "zone 2 on/off" for 2 seconds.

Mar 11, 2010 | Pioneer VSX-1019AHK A/V receiver

2 Answers

VSX-92TXH Elite will not power up


i do have same problem MCACC light blinking and no power. i bring in to norman electronic, and waiting for them to call me back

Nov 15, 2008 | Pioneer VSX-92TXH Receiver

1 Answer

Mcacc light is blinking and receiver will not turn on


Press the ENTER + VIDEO2 buttons on the front panel of the unit for 2 seconds. The unit then comes back to life! Lifesaver... I've been there... Works for VSX-1014, mine at least... ;)

Mar 06, 2008 | Pioneer VSX-1014 Receiver

Not finding what you are looking for?
Pioneer VSX-1014 Receiver Logo

Related Topics:

920 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Audio & Video Receivers Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Pioneer Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...