Question about Washing Machines

Open Question

Aeg lavamat 72520 error cd - Washing Machines

Posted by on

  • Anonymous Mar 29, 2009

    the same cd error. strange noise from the washing mashine and it doesn't start.

×

6 Suggested Answers

SOURCE: AEG LAVAMAT 74620 - Washing Machine CE error code

read this site: http://www.askanowner.nl/qa/view.asp?s=2&qid=152459&arrqueryparts=&arrquery=code%3Bce kind regards, w vd vegt

Posted on Aug 28, 2007

  • 4 Answers

SOURCE: error code e60

Hi I had this on my zanussi not long ago I pressed the reset button in for 5 seconds and it stopped . The computer board needed resetting. Hope this helps

Posted on Jul 08, 2008

  • 44 Answers

SOURCE: AEG Lavamat Turbo 12830 - error code E20

Hi

E20 means there is a bolckage in there
remove filter and clear any debris in there and check impeller is turning ok.

regards

Posted on Mar 21, 2009

GodBlessU
  • 3513 Answers

SOURCE: AEG Lavamat error E 20? what I have to do?

Hi,

The trouble with that darn E20-error, is that it might refer to any blockage in the water supply. So cleaning the pump is usually a first, but it might also be a blockage in the soap tray (when available), the tap or the hose attached to the tap. Sometimes, it seems most likely that the real cause is somewhere you clean less than the pump.

Hope this helps resolving it.

God Bless

Posted on Jul 08, 2009

  • 1 Answer

SOURCE: AEG Oko-Lavamat 86820 Update Error code C9

Hello. I got error code C9 on a LAVAMAT 86800. It pumped in water, and it pumps out water. You can select pump in or out....But the motor dont turn. It will not sentrifuge. So I bought new carbon brush'es on the net. One of them were totally wore down. Now it works. They lasted for 10 years.

Posted on Feb 05, 2010

taran_2005
  • 10515 Answers

SOURCE: What means error code

Hi,

C9 Indicates Motor Fault. It seems that the Carbon Brushes have Worn out.

Replace it and more likely it would Fix the Problem.Once you replace that, you need to put the machine into Service Mode to Reset the Error.

Steps for Reset the Error Code

1. Press and Hold the Prewash and Soaking Buttons Together.
2. Whilst Holding them, Turn the Dial from Off one Click Anti Clockwise

Note - If problem persists, Check the motor plug for broken wires and check the state of the carbon brushes.

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on Feb 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I correct error code 25 on an AEG OK-LAVAMAT 74640 update washing machine mean?


Family error code "E20" means difficulties in draining, but I never heard for error code E25 on this model. Could be : E21, E23 and E24 error code.

Dado

Aug 24, 2014 | AEG Washing Machines

1 Answer

AEG Lavamat 64809 error code E30


Lavamat?! Where in the *&%^ is this machine from? Yugoslavia! I'm guessing it will not allow water IN Because only the Spin (Centrifuge) cycle works?! So if that is so you need your water inlet valves replaced, there are Two. Even in machines named after a Bar of Soap!

Jan 04, 2014 | AEG Lavamat 16810 Front Load Washer/Dryer

2 Answers

AEG Lavamat 11842 Error code E66


http://bastlman.wz.cz/2010/08/AEG-Lavamat-error-codes.html

Feb 23, 2013 | AEG Washing Machines

1 Answer

AEG Lavamat 62800 keeps stopping and displaying error E50. What is the problem and how do I fix it?


AEG Lavamat 62800 keeps stopping and displaying error E50. What is the problem and how do I fix it?

Aug 07, 2011 | Washing Machines

2 Answers

AEG Lavamat 76810 E70 7Beeps Does seem to still work but display shows E70 and 7beeps over and over. Many thanks gary


I Have AEG Lavamat 76810 E70 7 Beeps and Beeps never stops

The water was not hot
I took all the multi-plugs out and put them back in the whole machine ALL CONNECTORS
Now it works fine E70 is gone

Jul 14, 2011 | AEG Lavamat 16810 Front Load Washer/Dryer

1 Answer

AEG Lavamat 74620 shows a Cd error code. Can you tell me what problem this indicates.


CD means door lock is defective. this may be due to the door catch broken or even the main board being defective.

Nov 23, 2010 | AEG Washing Machines

1 Answer

My AEG Lavamat 62810 keeps coming up with an error code E60. What is this?


On my AEG Lavamat 62810, when I turn on a wash cycle a motor (pump?) runs for 10–20 seconds then the machine switches off, with no error message. When this happened a few weeks agao running a drain cycle seemed to cure it; now the same thing happens on spin/drain/rinse cycles too. Any ideas?

Aug 06, 2010 | AEG Washing Machines

1 Answer

What does error code c9 mean?


c9 means there is no motor movement, typically worn out motor carbon brushes.

Jul 14, 2010 | AEG Lavamat 72640 Front Load Washer

1 Answer

Aeg oko lavamat 72600 update, ce error code showing any idea?


error code ce is a faulty water distributor fault . you have to replace the top part of the soap dispensor compartment. sometimes you can hear a clicking noise when its trying to operate

Jul 09, 2010 | AEG Lavamat 72640 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

395 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...