Question about Kenmore 16919 Built-in Dishwasher
We recently bought a house and the dishwasher will not work. The quick rinse light is on and blinking. We have unplugged it, and tried resetting the sensors. Can anyone help?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Blinking Quick Rinse
brent, After doing a little research on this model, I see that Sears put out a service flash concerning this problem. Dishwasher stops in mid cycle and one or more of the lights are flashing. SF22-715. The correction is to replace the existing board with an updated board that controls the line voltage better. Part number 8530928. You could be covered under this flash. The tech will have to eliminate the possibility of a stuck or shorted keypad which will cause this same effect. You can try to get this back in operation by pressing in this order: high temp wash-air dry-high temp wash-air dry. This will put it into a self test mode. Just let it run through if it works. If you don't have those keys try power scour-air dry-power scour-air dry. Catriver...post back.
Posted on Nov 21, 2006
you can try reseating the ribbon cable on the board however i strongly believe you have a stuck key and the key panel will need to be replaced.
Posted on Feb 02, 2009
you'll need to enter a diagnostic mode, press in this order, hi-temp(sani-rinse)----heated dry--hitemp---heated dry... all lights should light, close door and let cycle for about a min, after press the cancelbutton, you should be good to go, the buttons on your model may read slighty different names, if this "toggle of buttons" does not work, you can remove thelower access panel and htere willl be a tech sheet/trouble shoooter behind the panel, in there it will explain how to enter diag/test mode
Posted on Jul 02, 2009
Tips for a great answer:
Aug 12, 2016 | Kenmore Dishwashers
Oct 30, 2013 | Kenmore Dishwashers
Feb 25, 2009 | Kenmore 15899 Built-in Dishwasher
Aug 08, 2008 | Kenmore 15129 Built-in Dishwasher
Feb 02, 2008 | Dishwashers
Nov 27, 2007 | Kenmore 16583 Dishwasher
Nov 19, 2006 | Kenmore 16639 Built-in Dishwasher
Mar 05, 2017 | Kenmore 16919 Built-in Dishwasher
108 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: