Router i want to put security on my belkin 54g router

There a great article at General Router Setup.
If you need more help post back!
Thumbs and testimonial are welcome!

Please enter the IP address of the Router in the internet explorer and enter the user name and password of the router.(admin, admin). When the windows will open, you can see the wireless security. When you click on that you can see the security key. Other wise you can change the security key.

Hi
To secure the wireless network we have to open the Belkin Router Page
and turn on the WEP
Go through following My Tip
http://www.fixya.com/support/r3947432-configure_wireless_connection

1. Type http://1912.168.2.1 in your browser This gets you into the router's configuration

2.Look for the tab that says wireless settings or something similar
3. Look for security tab
4. Secure the router using one of the security schemes provided...whatever you use remember and write it down somewhere or you will have to reset your router if you forget your password and want to make changes to the router's configuration.

The address fro your Belkin 54G wireless router setup should be: http://192.168.2.1/
I would bypass the WiFi link/security and connect your PC/Laptop to be used for configuring the router via the Ethernet cable connection plug in Port 1 of the router.
If you do not have the password, you will need to reset the router to 'factory default' by using a small reset button on the back: you need a pen to push it down. Hold it down for about 10 seconds and it will put the router to factory default settings.
You will then need to reconfigure the router using the Belkins setup CD that came with the router (or download it before hand from Belkins support site): this will normally set it up automatically for you.
Hope it helps!

Go to the setup page for the router (IP 192.168.1.1) and set up the WPA-PSK [TKIP] security. It will allow fairly simple setup, and only provide the pass code to house members.

You set your security by enabling WEP.

When you get in the interface to configure WEP, set a pass phrase. Write down the 3 numeric keys it generates. Then connect to the wireless using your laptop, etc. When it asks for your passkey, do not enter the pass-phrase; enter one of the three keys that were generated by the router. That's the biggest mistake people make when trying to get wireless to work.

hey what you can do is you can reset the entire router... by using the reset button on your belkin router... Or else you can also access the router by using the following IP address in the internet exlorer...

try 192.168.1.1 or 192.168.1.0 & then go to the wep settings & reset the router or change the password for the router...

you may need to set up a security item...can't remember what it is, but you need to set up a password as well, to make the network secure