Question about Dyna-Glo (PPH16-LP) Utility Heater

Open Question

Dyna-glo rmi-80ngt. cuts off fire no rhyme or reason to it may stay lit for 2 hrs or 10 hrs but gas does not shut off

Have a dyna-glo Model # RMI-80NGT serial # 8NT8 001387 30,000 btus ANSIZ21.112-1996. unvented heater that I use in my family room I thought the Thermo coupler was bad but I can not find anywhere to purchase a replacement I have cleaned it out and removed any carbon build up that may be on it. I do not know where to go from here please help thanks in advace

Cora Fanning

Posted by on

  • kwiesm Nov 24, 2008

    Same Problem

  • Anonymous Mar 14, 2009

    same thing, won't stay lit

×

2 Suggested Answers

  • 2035 Answers

SOURCE: Pilot light goes out frequently. Model # RMI 80NGT

Hi try cleaning the pilot light could have some dirt in it or its the thermocouple

Posted on Jan 21, 2010

  • 2 Answers

SOURCE: I have a Dyna-Glo unvented

MAKE SURE THERE IS AMPLE FRESH AIR IN THE ROOM, SOME MODELS ARE MADE TO NOT LIGHT IF THERE IS NOT ENOUGH FRESH AIR. RON G.

Posted on Dec 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a dyna glo RMC 40 NGT vent less wall heater that I would like to convert to propane, I need to know which conversion kit to buy, and where. Thank you.


dyna glo natural gas heater Questions & Answers - Fixya

www.fixya.com > Forum > Tags
dyna glo ventless rmc50 ngt can this heater be changed from natural gas to propaneuse, ... Dyna Glo Natural Gas conversion to LP Gas I have a Dyna-Glo natural gas space ... Question about D-E36 Infra-Red Wall Mounted Panel Heater ... dyna glo heater model #RMC-40GT I believe on your particular model , that you ...

Parts for Dyna Glo, Thermoheat and Dyna Glo Pro Heaters

spaceheaterparts.com/category.sc?categoryId=13
Shop Dyna Glo, Thermoheat, Dura Heat, Workhorse LP and oil fired htrs ... Circuit Board 2201181 Dyna Glo & Thermoheat 150k Nat Gas Htr RMC-FA150NGDGD ... This spark plug (ignitor) is used on Dyna Glo and Thermoheat 40K btu LP.

Propane Wall Heaters - Walmart.com

www.walmart.com > ... > Heaters

WalmartDyna-Glo IR18NMDG-1 18,000 BTU Natural Gas - Infrared Vent Free Wall Heater. $170. ... Dyna-Glo 40K Liquid Propane 360-Degree Tank Top Heater. $88.00 ... Dyna-Glo Deluxe RMC-FA125DGD Portable Gas Powered Forced Air Heater.

1352062 Dyna Glo Natural Gas conversion to LP Gas

162.220.53.34/F/.../t1352062-dyna_glo_natural_gas_conversion_lp_gas

Jan 12, 2016 | Heating & Cooling

1 Answer

I have a Dyna Glo Propane Heater Model RMI-70LPT - Serial 0300235. I have been using it free standang but want to hang it. I've lost the hanger. Is it possible to purchase one? Hanger slots are...


Dyna Glo Gas Heaters are manufactured by CFM. You may be able to purchase the part directly from them. You can contact them at 800-668-5323. Have your Model Number handy when you call.

Apr 08, 2011 | Heating & Cooling

1 Answer

Pilot light goes out frequently. Model # RMI 80NGT


Hi try cleaning the pilot light could have some dirt in it or its the thermocouple

Jan 17, 2010 | Dyna-Glo (PPH16-LP) Utility Heater

1 Answer

The brick does not glow red you see the flame all the time, goes up pass the brick. Is this repairable or dangerous? (Dyna glo gas wall heater -model RMI-70LP)


Both repairable and dangerous. The burner need blown out with a air compressor. This should take care of it. The unit not glowing red will create CO. Which will make you sick or even can kill you.

Jan 06, 2010 | Dyna-Glo D-E36 Infra-Red Wall Mounted...

1 Answer

Cant find set screw on pilot burner. model no. rmi 70ng dyna-glo wall gas heater.


Set screw for what? To raise the flame? Not one. What you gotta do is clean out the pilot. Least bit of dust makes the safety think oxygen is low and shuts down the heater. I flush the pilot with a drop of rust busted then I use the long spout on it to blow out the pilot. You could use a straw tubing or shop air. Take a look at the demo HERE
A great page that shows where to clean the pilot and has links to more good stuff: HERE

Dec 31, 2009 | Dyna-Glo D-E36 Infra-Red Wall Mounted...

1 Answer

Dyna-Glo model RMC-8000PGH will not stay lit


Your pilot safety is full of dust. Flush it out with shop air or rust buster. Retry

BONUS INFO

Dec 17, 2009 | Dyna-Glo RMC-8001SS Heater

1 Answer

I have a Dyna-Glo vent-less wall mounted natural gas heater model number RMI-60NG Pilot light ignites.However no gas will supply too the burners.Causing them to be inoperable.What might be the cause of...


If it is a few years old, it could be the thermocouple. These are usually available from Lowes. Take your model/serial # and if you can, take the old part too.

Dec 11, 2009 | Dyna-Glo Heating & Cooling

1 Answer

I have a RMI-70LP Dyna-Glo 18,000 btu unvented room heater. Can it be converted to natural gas?


These can be converted by changing the orface on the heater and also the regulator. Best to contact your gas company or Dyna Glo to obtain the correct orface for that particular heater.

Oct 08, 2009 | Dyna-Glo Heating & Cooling

1 Answer

Dyna-glo parts


thermocouples you can buy from any heating spares oulet or national energy a hone well is most common for useing as a replacement

Feb 03, 2009 | Dyna-Glo D-E36 Infra-Red Wall Mounted...

Not finding what you are looking for?
Dyna-Glo (PPH16-LP) Utility Heater Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dyna-Glo Heating & Cooling Experts

paulcarew

Level 3 Expert

2035 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

drifterray

Level 1 Expert

10 Answers

Are you a Dyna-Glo Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...