Question about Brother XR7700

Open Question

Brother xr 7700 US model/ power pcb

Hi i have brother xr 7700 US model sewing machine, i brought to UK. i plugged in via step-down plug (220-240v in/ 120-140v out). But it just made a spark and not work now. I have opened the machine and found that the power pcb has blown(part no:CX07524D)specially partsF101,C101andL101. i do not have multimeter to check if anyone of them is open circuit.i like to change the whole board insted of parts and i wonder if 220-240v part is available insted of 120-140v as in the machine?? if the answer is yes where can i get it from in uk or us? any sites or phone nos. appriciated.
if i can't then where can i get 120-140v board? thanks

Posted by on

  • Coolmk May 11, 2010

    Did you find the solution ?? could u please let me know ....Coz i am planning to take this machine to India.

×

5 Suggested Answers

  • 5 Answers

SOURCE: My unit has no power to foot pedal. What are possible fixes?

change the power chord of your pedal, if not, open the pedal and look for the connection if that is cut or loose try to tight or connect it.

Posted on Oct 17, 2008

bargainbox
  • 1388 Answers

SOURCE: Looking for a Part for my Brother XR-31 Sewing Machine

If you look at the Brother global site, there may be a dealer nearby in Middle East, or certainly in Europe, ...the power plug fitting may then need adapter or replacing to suit socket in SA
Do you have family/friends in the "old country" who could send you one ?

Posted on Sep 08, 2009

Testimonial: "I have a mailbox that forwards to the Middle East and where I am staying is all 110V. So it is quite possible that I'll have to ship one from the USA."

  • 980 Answers

SOURCE: brother sewing machine circuit board is out need new one

If you have any problems with sewing machines with electronic boards or if the machine is computerised it is wise to take it to a specialist for repair.

Posted on Nov 04, 2009

  • 1116 Answers

SOURCE: blown electrical board

If this is a new machine you still have a warranty.

Contact Brother with the date of purchase and what happened.

Posted on Mar 18, 2010

  • 1116 Answers

SOURCE: authorize technition in LA area for brother sewing

Here is a Brother Dealer locator - http://www.brother-usa.com/HomeSewing/DealerLocator.aspx

Posted on Apr 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Top thread is hanging up somewhere under feed dogs. With and without bobbin in place. Any suggestions.


1. Make sure to adjust the bobbin tension. Also, make sure the bobbin is correct for the machine. If it is too tall it will surely have problems. (see attachment for bobbin tension adjustment)
2 Always thread your machine with the pressure foot up. As you thread give gentle tugs to check for hang ups. This has to be corrected.
3. Adjust the top tension to four to begin with. Final tension adjustment can be made when you give a trial sew.
*Always oil race w/one drop of oil before the bobbin case is placed back. This is done only about every 10000 stitches.


25822318-lb05hhmqketlwlruexfg0qqu-3-3.jpg

25822318-lb05hhmqketlwlruexfg0qqu-3-4.jpg

Aug 14, 2015 | Brother XR 7700 Computerized Sewing...

1 Answer

I am looking for a power cord and cable for a XR36, Brother Machine


your voltage is 220 vac and 50 hz down there and what type of electric plugs do you use but the xr 36 does not exist on brothers web site there is a xr35 and xr37?

Oct 13, 2014 | Sewing Machines

1 Answer

Timing is off


Model # ?
I have fixed my XR-7700

Dec 15, 2013 | Brother Sewing Machines

1 Answer

The buttons on the front panel of my Brother XR 7700 quit


it sounds like the sewing machine needs to be checked, they could
be just stuck, or some part of the inside may need adjusting, or the
grease and oil may need to be checked.

Nov 14, 2012 | Brother Sewing Machines

1 Answer

Presser Feet for XR-7700


Trust the Brother site and not the merchant.

Aug 13, 2012 | Brother XR7700

1 Answer

I I my brand new brother xr-7700 manual says to look on page 49 -50 for monograming but NOTHING THERE


I think that you will find that monogramming is done free style, we used to lower the feed dog and put our piece to be monogrammed into an embroidery hoop then use a satin stitches and sew whatever we wanted. You can call Brother. I downloaded your manual (after looking at your manual) I see what you mean

Apr 16, 2011 | Brother XR7700

2 Answers

Looking for a Part for my Brother XR-31 Sewing Machine


Here's the address and phone num in saudi
Saudi Arabia, Indang , Cavite - Indang. Contact Nos. : 09296385963 ... dspark
You didn't specify where in saudi thats why I was unable to hit it close if you wish someone closer then please do comment back

Sep 07, 2009 | Brother XR-31 Mechanical Sewing Machine

1 Answer

Tension problems


Possibly you have the bobbin in upside down and its turning the wrong way. Read manual. If you have done everything the manual says then it must be a mechanical issue such as the small thread take up spring or maybe the tensioner discs are dirty. Timing slightly off or there is a burr on the hook that catches the thread. Have a tech look at it.

Feb 11, 2009 | Brother XL-5130 Mechanical Sewing Machine

Not finding what you are looking for?
Brother XR7700 Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Irene Tulloch

Level 2 Expert

434 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...