Question about Hotpoint Aquarius WF220 Front Load Washer

1 Answer

Hotpoint When I press the start button on my washing machine ,the screen just comes up with the letters " test " . I have unplugged and tried different progs but as soon as the start button is pressed "test " comes up. Please help

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 100 Answers

Turn the machine on while pressing the start and on buttons at the same time until dOFF appears.

Posted on Jan 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hotpoint washer will not start when you press


Try the following, may work:
  1. Press the Start/Cancel button together until all the console Led's illuminate
  2. Press both Start/Cancel and On/Off buttons together until 'd off' appears
  3. Default screen should return and you can select a new programme

May 23, 2010 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

I have a hotpoint wf840 everytime i enter a wash cycle it just says test and performs a spin cycle whilst test still comes up on the screen is there anything i can do other than buy a new washing machine


Try the following, may work:
  1. Press the Start/Cancel button together until all the console Led's illuminate
  2. Press both Start/Cancel and On/Off buttons together until 'd off' appears
  3. Default screen should return and you can select a new programme

May 05, 2010 | Hotpoint Ultima WF840 Front Load Washer /...

1 Answer

Every time we try to wash it comes up test and goes through a test cycle. Will not wash. Hotpoint WF860


Try the following, may work:
  1. Press the Start/Cancel button together until all the console Led's illuminate
  2. Press both Start/Cancel and On/Off buttons together until 'd off' appears
  3. Default screen should return and you can select a new programme

Nov 26, 2009 | Hotpoint Ultima WF860 Front Load Washer

2 Answers

Hotpoint wt960 comes up with test all the time


Press the Start/Cancel button until all the console Led's Illuminate

Press both Start/Cancel and On/Off buttons together until 'd off' appears

Normal screen should return and you can select a new programme. (GL = good luck)

Mar 14, 2009 | Hotpoint Ultima WF860 Front Load Washer

2 Answers

Keeps going on test cycle


Try the following, may work:
  1. Press the Start/Cancel button together until all the console Led's illuminate
  2. Press both Start/Cancel and On/Off buttons together until 'd off' appears
  3. Default screen should return and you can select a new programme

Mar 03, 2009 | Hotpoint Ultima WF860 Front Load Washer

4 Answers

Washing machine


Pressing and holding the two centre buttons ie on/off and start/cancel together for a few seconds causes the machine to run in 'test' mode. Doing the same again puts it back to normal wash.
I nearly called an engineer once because my daughter causes it all of the time!

Sep 28, 2008 | Hotpoint Ultima WF860 Front Load Washer

2 Answers

Test on washing machine


yes try pressing the on/off button and start/cancel button at the same time

May 26, 2008 | Hotpoint Ultima WF840 Front Load Washer /...

1 Answer

Hotpoint wf860


the applionce is in demmo mode and running a test cycle so you need to cancle the cycle first by holding the start reset button until all the screen iluminates(88:88) now you need to disable the demo mode by holding the start cancle and the on off buttons together until you see D OFF in some cases you may need to hold the button to the top left of the screen and the start and on off buttons but this will sort it

Feb 17, 2008 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

"Test" displays no washing done!


Your test mode is on, maybe accidently. Press "start", "cancel", "on" & "off" together for 10 secs, you will see d/off come on the display. Do the same & the test mode comes on again.

Rate pl.

Dec 02, 2007 | Hotpoint Ultima WF860 Front Load Washer

3 Answers

Error message


Hotpoint’s are designed to go into test mode when the start button and the on/off button are pressed at the same time. If you are stuck in Test mode, simply hold the start button down until it comes out of test mode, then hold both the start buttons and the on/off button down until you see ‘D:end’ (or similar message)."

Nov 03, 2007 | Hotpoint Aquarius WD640 Front Load...

Not finding what you are looking for?
Hotpoint Aquarius WF220 Front Load Washer Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

puggy666

Level 1 Expert

47 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...