Question about Computers & Internet

Open Question

Icom u16 Wiring diagram for a cloning cable Part number OPC-129

HI. I require the wiring diagram to an icom u16 cloning cable. Could you be able to help me , with my solution.

Posted by on

5 Suggested Answers

  • 6 Answers

SOURCE: teardrop - icom 706mkII

http://homepage.ntlworld.com/rg4wpw/astaticbook.pdf

Posted on Jun 16, 2008

vrc_tech
  • 109 Answers

SOURCE: ut 40 and 50 tone squelch

Go to http://www.repeater-builder.com/icom/icom-ic-4ga-gat-ge-svc-man.pdf , there is a layout of the decoder in this pdf file. I hope this helps

73's de Patrick N5SLI

Posted on Nov 14, 2008

  • 1 Answer

SOURCE: I'd like to find the cloning software for Icom

http://icomrecievers.narod.ru/ you can get it here

Posted on Apr 06, 2009

kb8dns
  • 494 Answers

SOURCE: would like info on wiring dm 452 echo mic on icom 400 pro

There is a users group on yahoo that you could join and ask your question. I am not too familiar with this radio and this is the best I could do...

Posted on Feb 14, 2010

  • 1 Answer

SOURCE: Can someone provide a wiring diagram for the

hello, my name is paul and wondering if you can help me with a wiring diagram of cool talk throat mic icom earpiece, hope to hear from you soon .


kind regards

paul

Posted on Jun 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Icom u16 Rx , but when I Tx , speaker makes buzzing noise , could the antenna connection to the pc board be bad ?


It's possible because this would allow the RF signal to flood the circuit. I would suggest you try another antenna as a first solution. A bad antenna would cause the same problem. Good luck and let me know if it helps!

Sep 18, 2013 | ICOM Informatique Icom Radio U16, IC2GAT,...

1 Answer

Icom a 110


Contact Icom's service center. Their info is available at www.icom.com.

Aug 10, 2013 | Icom OPC-871 Headset Adapter for IC-A110...

1 Answer

NdlcomHow do i program the frequecies into the ICOM IG-F3GS If Need some software where can i get it fron


I use the ICOM OPC-478 cable along with the ICOM F3GS software. In order to use the OPC-478 cable with WINDOWS 7, it will be necessary to go to the site

www.icomamerica.com

choose support (not option 1) and look for the updated driver package for WINDOWS 7. When that has been downloaded and installed, it will be necessary to go into that part of the control device manager and change the port to "COM2".

I am now able to program both my IC-F3GS and the IC-F4GS.

Try contacting ICOM AMERICA

www.icomamerica.com or look on eBay.

.

Sep 03, 2011 | ICOM Informatique iTECH iQfive iQplus Icom...

1 Answer

I need to find the soft ware for a ic-f3s-2 icom portable radio can you help me ?


I use the ICOM OPC-478 cable along with the ICOM F3GS software. In order to use the OPC-478 cable with WINDOWS 7, it will be necessary to go to the site

www.icomamerica.com

choose support (not option 1) and look for the updated driver package for WINDOWS 7. When that has been downloaded and installed, it will be necessary to go into that part of the control device manager and change the port to "COM2".

I am now able to program both my IC-F3GS and the IC-F4GS.

Oct 25, 2010 | ICOM Informatique BP-196M,...

1 Answer

Manual for ic h16


You can download and print your manual, at no cost, here:

http://www.repeater-builder.com/icom/pdfs/icom-ic-u2-h16-u16-user-man.pdf

Bill B

Aug 06, 2010 | Icom Radio Communications

1 Answer

Can someone provide a wiring diagram for the


hello, my name is paul and wondering if you can help me with a wiring diagram of cool talk throat mic icom earpiece, hope to hear from you soon .


kind regards

paul

Dec 05, 2009 | ICOM Informatique IC-A23 VHF NAV/COM Air...

1 Answer

How do i program my icom IC-F3GS what program do i ned


I use the ICOM OPC-478 cable along with the ICOM F3GS software. In order to use the OPC-478 cable with WINDOWS 7, it will be necessary to go to the site

www.icomamerica.com

choose support (not option 1) and look for the updated driver package for WINDOWS 7. When that has been downloaded and installed, it will be necessary to go into that part of the control device manager and change the port to "COM2".

I am now able to program both my IC-F3GS and the IC-F4GS.

Sep 23, 2009 | ICOM Informatique iTECH iQfive iQplus Icom...

1 Answer

Memory program ch no# on icom u or h16


I had the same problem. I solved it by going into program mode, then while holding down the function key, input one of the missing channel numbers. The channel should appear but is flashing. Now input a frequency for the channel and exit program mode. Repeat the sequence for the other missing channels. This procedure worked for me. Good luck.

Nov 19, 2008 | ICOM Informatique Icom Radio U16, IC2GAT,...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...