Question about D-Link AirPlus DI-524 Wireless Router

2 Answers

How to block a wireless connection

Hey..hi..i have a wireless router and I used it to connect my two brother’s (@home) to go to internet through my computer …but one of my neighbor is also going through my wireless router so I’m asking you guys help to block him…(but he knows about networks more than us)please I’m waiting for a good answer for this problem…..
thanks..

Posted by on

  • Araduke Oct 20, 2008

    when i try to a have password he will replace it with a new one so ..i don't now what to do with it?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 67 Answers

First, log on to your router. to do this, open up internet explorer, then in the address bar type in 192.168.0.1 the user name is admin and i think the password is either blank, or it is also admin (unless you changed it) then click on wireless and put in a key for key 1. it can be as easy as putting in one number at the end. click apply, then continue. now, the only computers that have that code will be able to access your network. you will have to put that code into your computer to connect the first time, but it will remember the code after that. there is 26 digits, so i usually just put in 25 0's then one number, that way it is easy to put into the other computers, because you have to put in all 26 digits.
this should get ya going!

Posted on Oct 18, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 899 Answers

Goto your wireless settings and look for his address and block it
or set up the security in your wireless and create pass codes for you to give to each computer for connecting

Posted on Oct 18, 2008

  • jason Oct 18, 2008

    with that rating no one will continue to help you

  • jason Oct 21, 2008

    your not going to get anymore help , not when you rate someone like that when they are trying to help , so good luck with that!

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Wireless internet connection drops frequently


Things That Affect Wireless Router Signals
1. Many wireless routers are using the same wireless channel. Many manufacturers choose channel 6 as the default. Change to another channel. 2. Analogue video senders used to send audio and video to other TVs in the home. 3. Microwave ovens emit interference in the 2.4GHz band. 4. Wireless speakers and console controllers can cause interference with the wireless router. 5. Bluetooth devices, newer Bluetooth devices can jump to different frequencies if there is a connection problem. 6. Power cables located near the wireless router can cause dropouts and speed reduction. 7. Fish tanks will cause massive Wi-Fi shadow on the other side of the tank from the wireless router. 8. Depending upon the location of large mirrors will reflect wireless signal away your computer. 9. Building materials will block wireless signals such as plasterboards with metal foil, reinforced concrete walls and floors. Also objects near the wireless router such as metal filing cabinets and other electrical appliances. 10. Blinking Christmas lights can reduce Wi-Fi performance by 25% when it is close to the wireless router.

Aug 31, 2012 | Routers

1 Answer

2Wire Home Portal 1100 for AT&T DSL connection problem


HI! read your posting regarding the situation that your experiencing.. If before you dont have any problem regrding your connection with out the cisco network magic. I suggest that before you install the cisco network magic. you should get the full version not the trial version, there is a limitation of setting up the trial version.. Cisco network magic is a plug and play and easy to setup if you get the full version. I dont see any problem regarding your connection with the 2wire and the linksys router, becoz you mention earlier that hime network is working and you can connect to the network and the internet..

Jul 24, 2009 | 2wire Routers

1 Answer

DSL line disconnects on WRT54GS only


Try to change the LAN IP address of your router to 192.168.2.1 by accessing the router's Setup page. You also need to set your Westell modem to "full-bridge mode". You need to ask assistance from your ISP to bridge the modem. After that, set-up the Linksys router to PPPoE then power cycle it.

Apr 15, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

I can not connect my laptop to my linksys wireless-b router......


hi! Welcome to fixya!
You need to turn off first or disconnect LAN connection which is the cable connection before you can use the wireless connection. After that go control panel you need to setup internet connection and be sure to configure the IP address to automatic which the DHCP mode configuration then restart. That's it. Have nice day!

Mar 07, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Cannot Network printers on FIOS system


If both computers are connected to the router. Try turning off the firewall on both computers first. normally its firewalls blocking file and printer sharing that block the connection.

Mar 07, 2009 | Westell Wirespeed VersaLink...

1 Answer

Hey there. I have an msi router model: NO:RG606 For some reason only me, being the main user of the router can connect to the internet. My other buddy in my house cannot connect although there is good...


login to the router interface make sure there is not a block for anyone else to use it and the playstation you have to enter the wep code or whichever the encryption you used

Feb 17, 2009 | MSI Wireless-G RG54G3 Router

1 Answer

Internet connection lost when wireless printer added to network


for reseting the password of ur dlink router u have to press the rest button on the dlink router (genrallyit on the bottom or on the back of the router it is like a hole u have to use a pen or pin to reset the router back to its factory default settings after that password of the router will automatically back to admin or password login to ur router change the settings to static ip in the router so that u can provide the static ip of the other router to ur this router (example if primary router HL 2170 ip address is 192.168.1.1 then u will provide this dlink router the ip address as 192.168.1.5, subnet 255.255.255.0 default gateway 192.168.1.1 primary dns 192.168.1.1 now save the settings in the dlink router now the ethernet cable from ur other router will go directly in to the internetor wan port of this router. now connect wirelessly to any router both will work fine without any problem

Jun 03, 2008 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Wireless connection of netgear wireless router for compaq laptop


Sometimes firewalls on your computers can cause connection issues. I had the same problem with my home network. I had norton internet security 2008 on both systems, but the firewall settings on both computers had to be adjusted to allow the computers to talk. If you have different brand firewalls on each computer, you should consider to switching one of the computers so that it matches the other.

Another thing you want to do is log into the router's web utility and check to see if the wireless settings are blocking wireless connections in some way. You also want to make sure the ssid broadcast is enabled.

Finally, you really should consider using security on your router, so wireless connections would be password protected. I suggest wpa personal.

May 03, 2008 | NetGear WGR614 Wireless Router

3 Answers

Wireless connection


Hi, I am going crazy! Just moved house and took my Netgear Wireless router with me. However, even though the hard wired base unit works, my wireless laptop can't access the internet - even though a full stregnth signal is there when i browse for wireless connections. Using Vista Home Premium. Help appreciated!

Dec 29, 2007 | NetGear WGR614 Wireless Router

1 Answer

Wireless set up for ntl


hey thats easy man dont worry, if you have a existing broadband at home, just connect the broadband to your router, then connect the cable that comes up with the router to your laptop. then access the web configuration of the router, the ip address is usually written in the manual. then configure it with the settings that your Internet Service Provider gave you to connect. then configure the wireless settings and your done... if you still have problems, please feel free to contact me again..........

May 11, 2007 | 2wire (1000-400108-001) Router

Not finding what you are looking for?
D-Link AirPlus DI-524 Wireless Router Logo

Related Topics:

2,345 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Mike

Level 3 Expert

4331 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a D-Link Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...